tegra: usb: Add support for Tegra USB peripheral
This adds basic support for the Tegra2 USB controller. Board files should
call board_usb_init() to set things up.
Configuration is performed through the FDT, with aliases used to set the
order of the ports, like this fragment:
aliases {
/* This defines the order of our USB ports */
usb0 = "/usb@0xc5008000";
usb1 = "/usb@0xc5000000";
};
drivers/usb/host files ONLY: Acked-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/include/asm/arch-tegra2/usb.h b/arch/arm/include/asm/arch-tegra2/usb.h
new file mode 100644
index 0000000..638033b
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra2/usb.h
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[6];
+
+ /* 0x140 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x150 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint async_tt_sts;
+
+ /* 0x160 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6; /* is this port_sc1 on some controllers? */
+ uint icusb_ctrl;
+
+ /* 0x170 */
+ uint ulpi_viewport;
+ uint reserved7;
+ uint endpt_nak;
+ uint endpt_nak_enable;
+
+ /* 0x180 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x1a0 */
+ uint reserved9;
+ uint otgsc;
+ uint usb_mode;
+ uint endpt_setup_stat;
+
+ /* 0x1b0 */
+ uint reserved10[20];
+
+ /* 0x200 */
+ uint reserved11[0x80];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[3];
+
+ /* 0x420 */
+ uint reserved13[56];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+
+/* USB1_LEGACY_CTRL */
+#define USB1_NO_LEGACY_MODE 1
+
+#define VBUS_SENSE_CTL_SHIFT 1
+#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT)
+#define VBUS_SENSE_CTL_VBUS_WAKEUP 0
+#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1
+#define VBUS_SENSE_CTL_AB_SESS_VLD 2
+#define VBUS_SENSE_CTL_A_SESS_VLD 3
+
+/* USBx_IF_USB_SUSP_CTRL_0 */
+#define UTMIP_PHY_ENB (1 << 12)
+#define UTMIP_RESET (1 << 11)
+#define USB_PHY_CLK_VALID (1 << 7)
+
+/* USBx_UTMIP_MISC_CFG1 */
+#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
+#define UTMIP_PLLU_STABLE_COUNT_MASK \
+ (0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \
+ (0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
+#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30)
+
+/* USBx_UTMIP_PLL_CFG1_0 */
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
+ (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
+#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
+
+/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
+#define UTMIP_BIAS_PDTRK_COUNT_MASK \
+ (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+
+#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
+#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
+
+/* USBx_UTMIP_TX_CFG0_0 */
+#define UTMIP_FS_PREAMBLE_J (1 << 19)
+
+/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
+#define UTMIP_PD_CHRG 1
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
+
+/* USBx_UTMIP_SPARE_CFG0_0 */
+#define FUSE_SETUP_SEL (1 << 3)
+
+/* USBx_UTMIP_HSRX_CFG0_0 */
+#define UTMIP_IDLE_WAIT_SHIFT 15
+#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT)
+#define UTMIP_ELASTIC_LIMIT_SHIFT 10
+#define UTMIP_ELASTIC_LIMIT_MASK \
+ (0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
+
+/* USBx_UTMIP_HSRX_CFG0_1 */
+#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
+#define UTMIP_HS_SYNC_START_DLY_MASK \
+ (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
+
+/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
+#define IC_ENB1 (1 << 3)
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
+#define PTS_SHIFT 30
+#define PTS_MASK (3U << PTS_SHIFT)
+#define PTS_UTMI 0
+#define PTS_RESERVED 1
+#define PTS_ULP 2
+#define PTS_ICUSB_SER 3
+
+#define STS (1 << 29)
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
+
+/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
+
+/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
+#define VBUS_VLD_STS (1 << 26)
+
+
+/* Change the USB host port into host mode */
+void usb_set_host_mode(void);
+
+/* Setup USB on the board */
+int board_usb_init(const void *blob);
+
+/**
+ * Start up the given port number (ports are numbered from 0 on each board).
+ * This returns values for the appropriate hccr and hcor addresses to use for
+ * USB EHCI operations.
+ *
+ * @param portnum port number to start
+ * @param hccr returns start address of EHCI HCCR registers
+ * @param hcor returns start address of EHCI HCOR registers
+ * @return 0 if ok, -1 on error (generally invalid port number)
+ */
+int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor);
+
+/**
+ * Stop the current port
+ *
+ * @return 0 if ok, -1 if no port was active
+ */
+int tegrausb_stop_port(void);
+
+#endif /* _TEGRA_USB_H_ */