arm/km: replace suenx targets with km_kirkwood
suen3 and suen8 were in first HW version quite different, but
now they are from a u-boot point of view similar. So these
two boards can use the same header file. Other keymile boards
differ only in the usage of the PCI interface. Therefore
a target km_kirkwood_pci was introduced. All targets use
the same header file.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Heiko Schocher <hs@denx.de>
diff --git a/include/configs/suen3.h b/include/configs/km_kirkwood.h
similarity index 76%
rename from include/configs/suen3.h
rename to include/configs/km_kirkwood.h
index 0f1b11e..e51b270 100644
--- a/include/configs/suen3.h
+++ b/include/configs/km_kirkwood.h
@@ -6,6 +6,9 @@
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
+ * (C) Copyright 2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.de
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -30,8 +33,8 @@
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
*/
-#ifndef _CONFIG_SUEN3_H
-#define _CONFIG_SUEN3_H
+#ifndef _CONFIG_KM_KIRKWOOD_H
+#define _CONFIG_KM_KIRKWOOD_H
/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"
@@ -39,11 +42,16 @@
/*
* Version number information
*/
-#define CONFIG_IDENT_STRING "\nKeymile SUEN3"
+#ifdef CONFIG_KM_DISABLE_PCI
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
+#undef CONFIG_KIRKWOOD_PCIE_INIT
+#else
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
+#endif
-#define CONFIG_HOSTNAME suen3
+#define CONFIG_HOSTNAME km_kirkwood
#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-#endif /* _CONFIG_SUEN3_H */
+#endif /* _CONFIG_KM_KIRKWOOD */
diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h
index 8d1b61f..ac01a31 100644
--- a/include/configs/mgcoge3un.h
+++ b/include/configs/mgcoge3un.h
@@ -76,4 +76,9 @@
MVGBE_SET_GMII_SPEED_TO_10_100 |\
MVGBE_SET_MII_SPEED_TO_100)
+/*
+ * PCIe port not used on mgcoge3un
+ */
+#undef CONFIG_KIRKWOOD_PCIE_INIT
+
#endif /* _CONFIG_MGCOGE3UN_H */
diff --git a/include/configs/suen8.h b/include/configs/suen8.h
deleted file mode 100644
index 78cee75..0000000
--- a/include/configs/suen8.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
-
-#ifndef _CONFIG_SUEN8_H
-#define _CONFIG_SUEN8_H
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nKeymile SUEN8"
-
-#define CONFIG_HOSTNAME suen8
-
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-
-#endif /* _CONFIG_SUEN8_H */