Blackfin: bfin_mac: convert to portmux framework
Rather than bang MMRs directly, use the new portmux framework to handle
the details. While we're doing this, let boards declare the exact list
of pins they need in case there is one or two they don't actually have
hooked up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 720e126..ee4ad6c 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -16,6 +16,7 @@
#include <linux/mii.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/dma.h>
#include <asm/mach-common/bits/emac.h>
#include <asm/mach-common/bits/pll.h>
@@ -213,8 +214,17 @@
/* MDC = SCLK / MDC_freq / 2 - 1 */
#define MDC_FREQ_TO_DIV(mdc_freq) (get_sclk() / (mdc_freq) / 2 - 1)
+#ifndef CONFIG_BFIN_MAC_PINS
+# ifdef CONFIG_RMII
+# define CONFIG_BFIN_MAC_PINS P_RMII0
+# else
+# define CONFIG_BFIN_MAC_PINS P_MII0
+# endif
+#endif
+
static int bfin_miiphy_init(struct eth_device *dev, int *opmode)
{
+ const unsigned short pins[] = CONFIG_BFIN_MAC_PINS;
u16 phydat;
size_t count;
@@ -222,42 +232,7 @@
*pVR_CTL |= CLKBUFOE;
/* Set all the pins to peripheral mode */
-#ifdef CONFIG_RMII
- /* grab RMII pins */
-# if defined(__ADSPBF51x__)
- *pPORTF_MUX = (*pPORTF_MUX & \
- ~(PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
- PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
- *pPORTF_FER |= PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
- *pPORTG_FER |= PG0 | PG1 | PG2;
-# elif defined(__ADSPBF52x__)
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
- *pPORTG_FER |= PG14 | PG15;
- *pPORTH_MUX = (*pPORTH_MUX & ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK)) | \
- PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2;
- *pPORTH_FER |= PH0 | PH1 | PH2 | PH3 | PH4 | PH5 | PH6 | PH7 | PH8;
-# else
- *pPORTH_FER |= PH0 | PH1 | PH4 | PH5 | PH6 | PH8 | PH9 | PH14 | PH15;
-# endif
-#else
- /* grab MII & RMII pins */
-# if defined(__ADSPBF51x__)
- *pPORTF_MUX = (*pPORTF_MUX & \
- ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
- PORT_x_MUX_0_FUNC_1 | PORT_x_MUX_1_FUNC_1 | PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
- *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
- *pPORTG_FER |= PG0 | PG1 | PG2;
-# elif defined(__ADSPBF52x__)
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
- *pPORTG_FER |= PG14 | PG15;
- *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2 | PORT_x_MUX_2_FUNC_2;
- *pPORTH_FER = -1; /* all pins */
-# else
- *pPORTH_FER = -1; /* all pins */
-# endif
-#endif
+ peripheral_request_list(pins, "bfin_mac");
/* Odd word alignment for Receive Frame DMA word */
/* Configure checksum support and rcve frame word alignment */