siemens: update DDR3 parameters for dxr2
* add parameters for factory and print them at start up to
facilitate control of right DDR3 settings in EEPROM.
* cosmetic changes in a couple of printfs
Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Cc: Roger Meier <r.meier@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h
index abf5432..a59ffb0 100644
--- a/board/siemens/dxr2/board.h
+++ b/board/siemens/dxr2/board.h
@@ -22,24 +22,26 @@
#define MAGIC_CHIP 0x50494843
/* Automatic generated definition */
-/* Wed, 18 Sep 2013 18:58:27 +0200 */
-/* From file: draco/ddr3-data-micron-v2.txt */
+/* Wed, 16 Apr 2014 16:50:41 +0200 */
+/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
struct ddr3_data {
unsigned int magic; /* 0x33524444 */
- unsigned int version; /* 0x56312e34 */
- unsigned short int ddr3_sratio; /* 0x0100 */
- unsigned short int iclkout; /* 0x0001 */
+ unsigned int version; /* 0x56312e35 */
+ unsigned short int ddr3_sratio; /* 0x0080 */
+ unsigned short int iclkout; /* 0x0000 */
unsigned short int dt0rdsratio0; /* 0x003A */
- unsigned short int dt0wdsratio0; /* 0x008A */
- unsigned short int dt0fwsratio0; /* 0x010B */
- unsigned short int dt0wrsratio0; /* 0x00C4 */
+ unsigned short int dt0wdsratio0; /* 0x003F */
+ unsigned short int dt0fwsratio0; /* 0x009F */
+ unsigned short int dt0wrsratio0; /* 0x0079 */
unsigned int sdram_tim1; /* 0x0888A39B */
unsigned int sdram_tim2; /* 0x26247FDA */
unsigned int sdram_tim3; /* 0x501F821F */
unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */
- unsigned int sdram_config; /* 0x61C04AB2 */
- unsigned int ref_ctrl; /* 0x00000618 */
- unsigned int ioctr_val; /* 0x0000018B */
+ unsigned int sdram_config; /* 0x61A44A32 */
+ unsigned int ref_ctrl; /* 0x0000093B */
+ unsigned int ioctr_val; /* 0x0000014A */
+ char manu_name[32]; /* "default@303MHz \0" */
+ char manu_marking[32]; /* "default \0" */
};
struct chip_data {