siemens:cosmetic, dxr2: rename dxr2 to draco
The actual board name is draco and dxr2 is the target name.
In the future we'll have different targets based on draco board.
All changes are purely non-functional and basically rename dxr2
to draco.
One style fix in board.c that existed already before.
Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Reviewed-by: Roger Meier <r.meier@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/board/siemens/draco/Makefile b/board/siemens/draco/Makefile
new file mode 100644
index 0000000..f159932
--- /dev/null
+++ b/board/siemens/draco/Makefile
@@ -0,0 +1,21 @@
+#
+# Makefile
+#
+# (C) Copyright 2013 Siemens Schweiz AG
+# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# Based on:
+# u-boot:/board/ti/am335x/Makefile
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y := mux.o
+endif
+
+obj-y += board.o
+ifndef CONFIG_SPL_BUILD
+obj-y += ../common/factoryset.o
+endif
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
new file mode 100644
index 0000000..9be2e34
--- /dev/null
+++ b/board/siemens/draco/board.c
@@ -0,0 +1,283 @@
+/*
+ * Board functions for TI AM335X based draco board
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ *
+ * Board functions for TI AM335X based boards
+ * u-boot:/board/ti/am335x/board.c
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <watchdog.h>
+#include "board.h"
+#include "../common/factoryset.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static struct draco_baseboard_id __attribute__((section(".data"))) settings;
+
+#if DDR_PLL_FREQ == 303
+/* Default@303MHz-i0 */
+const struct ddr3_data ddr3_default = {
+ 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
+ 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x0000093B, 0x0000014A,
+ "default name @303MHz \0",
+ "default marking \0",
+};
+#elif DDR_PLL_FREQ == 400
+/* Default@400MHz-i0 */
+const struct ddr3_data ddr3_default = {
+ 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab,
+ 0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232,
+ 0x00000618, 0x0000014A,
+ "default name @400MHz \0",
+ "default marking \0",
+};
+#endif
+
+static void set_default_ddr3_timings(void)
+{
+ printf("Set default DDR3 settings\n");
+ settings.ddr3 = ddr3_default;
+}
+
+static void print_ddr3_timings(void)
+{
+ printf("\nDDR3\n");
+ printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
+ printf("device:\t\t%s\n", settings.ddr3.manu_name);
+ printf("marking:\t%s\n", settings.ddr3.manu_marking);
+ printf("timing parameters\n");
+ printf("diff\teeprom\tdefault\n");
+ PRINTARGS(magic);
+ PRINTARGS(version);
+ PRINTARGS(ddr3_sratio);
+ PRINTARGS(iclkout);
+
+ PRINTARGS(dt0rdsratio0);
+ PRINTARGS(dt0wdsratio0);
+ PRINTARGS(dt0fwsratio0);
+ PRINTARGS(dt0wrsratio0);
+
+ PRINTARGS(sdram_tim1);
+ PRINTARGS(sdram_tim2);
+ PRINTARGS(sdram_tim3);
+
+ PRINTARGS(emif_ddr_phy_ctlr_1);
+
+ PRINTARGS(sdram_config);
+ PRINTARGS(ref_ctrl);
+ PRINTARGS(ioctr_val);
+}
+
+static void print_chip_data(void)
+{
+ printf("\nCPU BOARD\n");
+ printf("device: \t'%s'\n", settings.chip.sdevname);
+ printf("hw version: \t'%s'\n", settings.chip.shwver);
+}
+#endif /* CONFIG_SPL_BUILD */
+
+/*
+ * Read header information from EEPROM into global structure.
+ */
+static int read_eeprom(void)
+{
+ /* Check if baseboard eeprom is available */
+ if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+ printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
+ return 1;
+ }
+
+#ifdef CONFIG_SPL_BUILD
+ /* Read Siemens eeprom data (DDR3) */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2,
+ (uchar *)&settings.ddr3, sizeof(struct ddr3_data))) {
+ printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n");
+ set_default_ddr3_timings();
+ }
+ /* Read Siemens eeprom data (CHIP) */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2,
+ (uchar *)&settings.chip, sizeof(settings.chip)))
+ printf("Could not read chip settings\n");
+
+ if (ddr3_default.magic == settings.ddr3.magic &&
+ ddr3_default.version == settings.ddr3.version) {
+ printf("Using DDR3 settings from EEPROM\n");
+ } else {
+ if (ddr3_default.magic != settings.ddr3.magic)
+ printf("Warning: No valid DDR3 data in eeprom.\n");
+ if (ddr3_default.version != settings.ddr3.version)
+ printf("Warning: DDR3 data version does not match.\n");
+
+ printf("Using default settings\n");
+ set_default_ddr3_timings();
+ }
+
+ if (MAGIC_CHIP == settings.chip.magic)
+ print_chip_data();
+ else
+ printf("Warning: No chip data in eeprom\n");
+
+ print_ddr3_timings();
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+static void board_init_ddr(void)
+{
+struct emif_regs draco_ddr3_emif_reg_data = {
+ .zq_config = 0x50074BE4,
+};
+
+struct ddr_data draco_ddr3_data = {
+};
+
+struct cmd_control draco_ddr3_cmd_ctrl_data = {
+};
+
+struct ctrl_ioregs draco_ddr3_ioregs = {
+};
+
+ /* pass values from eeprom */
+ draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
+ draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
+ draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
+ draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
+ settings.ddr3.emif_ddr_phy_ctlr_1;
+ draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
+ draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
+
+ draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
+ draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
+ draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
+ draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
+
+ draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
+ draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
+ draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
+
+ draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
+
+ config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
+ &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
+}
+
+static void spl_siemens_board_init(void)
+{
+ return;
+}
+#endif /* if def CONFIG_SPL_BUILD */
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 0,
+ .phy_if = PHY_INTERFACE_MODE_MII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 4,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+#if defined(CONFIG_DRIVER_TI_CPSW) || \
+ (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+int board_eth_init(bd_t *bis)
+{
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+ int n = 0;
+ int rv;
+
+ factoryset_setenv();
+
+ /* Set rgmii mode and enable rmii clock to be sourced from chip */
+ writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ n += rv;
+ return n;
+}
+
+static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ /* Reset SMSC LAN9303 switch for default configuration */
+ gpio_request(GPIO_LAN9303_NRST, "nRST");
+ gpio_direction_output(GPIO_LAN9303_NRST, 0);
+ /* assert active low reset for 200us */
+ udelay(200);
+ gpio_set_value(GPIO_LAN9303_NRST, 1);
+
+ return 0;
+};
+
+U_BOOT_CMD(
+ switch_rst, CONFIG_SYS_MAXARGS, 1, do_switch_reset,
+ "Reset LAN9303 switch via its reset pin",
+ ""
+);
+#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
+#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
+
+#include "../common/board.c"
diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h
new file mode 100644
index 0000000..ff8ab76
--- /dev/null
+++ b/board/siemens/draco/board.h
@@ -0,0 +1,72 @@
+/*
+ * board.h
+ *
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * TI AM335x boards information header
+ * u-boot:/board/ti/am335x/board.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \
+ settings.ddr3.x, ddr3_default.x
+#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y))
+#define MAGIC_CHIP 0x50494843
+
+/* Automatic generated definition */
+/* Wed, 16 Apr 2014 16:50:41 +0200 */
+/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
+struct ddr3_data {
+ unsigned int magic; /* 0x33524444 */
+ unsigned int version; /* 0x56312e35 */
+ unsigned short int ddr3_sratio; /* 0x0080 */
+ unsigned short int iclkout; /* 0x0000 */
+ unsigned short int dt0rdsratio0; /* 0x003A */
+ unsigned short int dt0wdsratio0; /* 0x003F */
+ unsigned short int dt0fwsratio0; /* 0x009F */
+ unsigned short int dt0wrsratio0; /* 0x0079 */
+ unsigned int sdram_tim1; /* 0x0888A39B */
+ unsigned int sdram_tim2; /* 0x26247FDA */
+ unsigned int sdram_tim3; /* 0x501F821F */
+ unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */
+ unsigned int sdram_config; /* 0x61A44A32 */
+ unsigned int ref_ctrl; /* 0x0000093B */
+ unsigned int ioctr_val; /* 0x0000014A */
+ char manu_name[32]; /* "default@303MHz \0" */
+ char manu_marking[32]; /* "default \0" */
+};
+
+struct chip_data {
+ unsigned int magic;
+ char sdevname[16];
+ char shwver[7];
+};
+
+struct draco_baseboard_id {
+ struct ddr3_data ddr3;
+ struct chip_data chip;
+};
+
+/*
+ * We have three pin mux functions that must exist. We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c
new file mode 100644
index 0000000..eaa3c70
--- /dev/null
+++ b/board/siemens/draco/mux.c
@@ -0,0 +1,272 @@
+/*
+ * pinmux setup for siemens draco board
+ *
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * u-boot:/board/ti/am335x/mux.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
+
+static struct module_pin_mux uart3_pin_mux[] = {
+ {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
+ {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
+ {-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
+ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
+ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+
+static struct module_pin_mux gpios_pin_mux[] = {
+ /* DFU button GPIO0_27*/
+ {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
+ {OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */
+ {OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */
+ /* Triacs in HW Rev 2 */
+ {OFFSET(uart1_ctsn), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y5 GPIO0_12*/
+ {OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y3 GPIO2_28*/
+ {OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y7 GPIO2_27*/
+ /* Triacs initial HW Rev */
+ {OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_30 Y0 */
+ {OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_28 Y1 */
+ {OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_31 Y2 */
+ {OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_11 Y3 */
+ {OFFSET(lcd_data14), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_10 Y4 */
+ {OFFSET(gpmc_clk), MODE(7) | RXACTIVE | PULLUDDIS}, /* 2_1 Y5 */
+ {OFFSET(emu1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 3_8 Y6 */
+ {OFFSET(gpmc_ad15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_15 Y7 */
+ /* Remaining pins that were not used in this file */
+ {OFFSET(gpmc_ad8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_ad9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_data9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_vsync), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_hsync), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_pclk), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_dat3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_dat0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_clk), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mmc0_cmd), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_sclk), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(spi0_cs0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart1_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart1_rxd), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(uart1_txd), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_aclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_fsx), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_axr0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_ahclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_aclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_fsr), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_axr1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(mcasp0_ahclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(xdma_event_intr0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(xdma_event_intr1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(nresetin_out), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(porz), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(nnmi), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc0_in), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc0_out), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(rsvd1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tms), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tdi), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tdo), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(tck), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ntrst), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc1_in), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(osc1_out), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(pmic_power_en), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(rtc_porz), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(rsvd2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ext_wakeup), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(enz_kaldo_1p8v), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_id), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb0_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_id), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(usb1_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_resetn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_csn0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_cke), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ck), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_nck), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_casn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_rasn), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_wen), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ba0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ba1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_ba2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a12), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a13), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a14), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_a15), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_odt), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d8), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d9), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d10), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d11), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d12), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d13), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d14), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_d15), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqm0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqm1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqs0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqsn0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqs1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_dqsn1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_vref), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_vtp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_strben0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ddr_strben1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain7), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain6), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain5), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain4), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain3), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain2), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain1), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
+ {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
+ /* nRST for SMSC LAN9303 switch - GPIO2_24 */
+ {OFFSET(lcd_pclk), MODE(7) }, /* LAN9303 nRST */
+ {-1},
+};
+
+static struct module_pin_mux ethernet_pin_mux[] = {
+ {OFFSET(mii1_col), (MODE(3) | RXACTIVE)},
+ {OFFSET(mii1_crs), (MODE(1) | RXACTIVE)},
+ {OFFSET(mii1_rxerr), (MODE(1) | RXACTIVE)},
+ {OFFSET(mii1_txen), (MODE(1))},
+ {OFFSET(mii1_rxdv), (MODE(3) | RXACTIVE)},
+ {OFFSET(mii1_txd3), (MODE(7) | RXACTIVE)},
+ {OFFSET(mii1_txd2), (MODE(7) | RXACTIVE)},
+ {OFFSET(mii1_txd1), (MODE(1))},
+ {OFFSET(mii1_txd0), (MODE(1))},
+ {OFFSET(mii1_txclk), (MODE(1) | RXACTIVE)},
+ {OFFSET(mii1_rxclk), (MODE(1) | RXACTIVE)},
+ {OFFSET(mii1_rxd3), (MODE(1) | RXACTIVE)},
+ {OFFSET(mii1_rxd2), (MODE(1))},
+ {OFFSET(mii1_rxd1), (MODE(1) | RXACTIVE)},
+ {OFFSET(mii1_rxd0), (MODE(1) | RXACTIVE)},
+ {OFFSET(rmii1_refclk), (MODE(0) | RXACTIVE)},
+ {OFFSET(mdio_data), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)},
+ {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_uart3_pin_mux(void)
+{
+ configure_module_pin_mux(uart3_pin_mux);
+}
+
+void enable_i2c0_pin_mux(void)
+{
+ configure_module_pin_mux(i2c0_pin_mux);
+}
+
+void enable_board_pin_mux(void)
+{
+ enable_uart3_pin_mux();
+ configure_module_pin_mux(nand_pin_mux);
+ configure_module_pin_mux(ethernet_pin_mux);
+ configure_module_pin_mux(gpios_pin_mux);
+}