arm: ls1021x: Add support for initializing CAAM's stream id
There 4 JRs, 4 RTICs and 8 DECOs, and set them the same stream id
for using the same SMMU3 on LS1021A.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index cfabdc6..3b6a169 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -36,6 +36,7 @@
#define CONFIG_SYS_LS102XA_USB1_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET)
+#define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000
#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000
#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
index abd70fc..fa571b3 100644
--- a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
@@ -7,11 +7,68 @@
#ifndef __FSL_LS102XA_STREAM_ID_H_
#define __FSL_LS102XA_STREAM_ID_H_
+#include <fsl_sec.h>
+
+#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
+ { .compat = name, \
+ .id = { idA }, .num_ids = 1, \
+ .reg_offset = off + CONFIG_SYS_IMMR, \
+ .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
+ }
+
+#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
+ { .compat = name, \
+ .id = { idA, idB }, .num_ids = 2, \
+ .reg_offset = off + CONFIG_SYS_IMMR, \
+ .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
+ }
+
+/*
+ * handle both old and new versioned SEC properties:
+ * "fsl,secX.Y" became "fsl,sec-vX.Y" during development
+ */
+#define SET_SEC_JR_LIODN_ENTRY(jrnum, liodnA, liodnB) \
+ SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB, \
+ offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum), \
+ SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
+ offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum)
+
+/* This is a bit evil since we treat rtic param as both a string & hex value */
+#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
+ SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
+ liodnA, \
+ offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
+ SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
+ liodnA, \
+ offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))
+
+#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
+ SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
+ offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, 0)
+
+struct liodn_id_table {
+ const char *compat;
+ u32 id[2];
+ u8 num_ids;
+ phys_addr_t compat_offset;
+ unsigned long reg_offset;
+};
+
struct smmu_stream_id {
uint16_t offset;
uint16_t stream_id;
char dev_name[32];
};
+void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size);
void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
#endif