commit 80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4
author Hans de Goede <hdegoede@redhat.com> Mon Mar 14 17:37:09 2016 +0100
committer Hans de Goede <hdegoede@redhat.com> Wed Mar 23 22:04:13 2016 +0100
tree 39fe4223027504cf9fdfa54c2212401be4a95b92
parent 4bb656e9dde2019cb42ac4c27b3a114a801ad127

sunxi: Sync dts files with the upstream kernel

Sync dts files with the upstream kernel including
changes queued for 4.6:

https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6

Note this adds a number of new unused board dts files. I've asked the
authors of the kernel commits adding these to submit a matching defconfig
to u-boot.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

arch/arm/dts/sun9i-a80-optimus.dts

diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts
index 6ce4b5e..d7a20d9 100644
--- a/arch/arm/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/dts/sun9i-a80-optimus.dts
@@ -65,7 +65,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_optimus>;
+		pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
 
 		/* The LED names match those found on the board */
 
@@ -74,7 +74,10 @@
 			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		/* led3 is on PM15, in R_PIO */
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
 
 		led4 {
 			label = "optimus:led4:usr";
@@ -106,17 +109,6 @@
 	status = "okay";
 };
 
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_a>;
-	status = "okay";
-};
-
-&i2c3_pins_a {
-	/* Enable internal pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -171,32 +163,44 @@
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <8>;
 	non-removable;
+	cap-mmc-hw-reset;
 	status = "okay";
 };
 
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_optimus>;
 	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	status = "okay";
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	led_r_pins_optimus: led-pins@1 {
+		allwinner,pins = "PM15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&uart4_pins_a {
-	/* Enable internal pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-};
-
 &usbphy1 {
 	phy-supply = <&reg_usb1_vbus>;
 	status = "okay";