[PPC440SPe] Improve PCIe configuration space access
- correct configuration space mapping
- correct bus numbering
- better access to config space
Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
first device on the first bus. We now allow to configure up to 16 buses;
also, scanning for devices behind the PCIe-PCIe bridge is supported, so
peripheral devices farther in hierarchy can be identified.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 2837929..282e7a1 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -443,7 +443,7 @@
static struct pci_controller ppc440_hose = {0};
-void pci_440_init (struct pci_controller *hose)
+int pci_440_init (struct pci_controller *hose)
{
int reg_num = 0;
@@ -459,7 +459,7 @@
if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
printf("PCI: SDR0_STRP1[PISE] not set.\n");
printf("PCI: Configuration aborted.\n");
- return;
+ return -1;
}
#elif defined(CONFIG_440GP)
unsigned long strap;
@@ -468,7 +468,7 @@
if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
printf("PCI: CPC0_STRP1[PISE] not set.\n");
printf("PCI: Configuration aborted.\n");
- return;
+ return -1;
}
#endif
#endif /* CONFIG_DISABLE_PISE_TEST */
@@ -477,7 +477,7 @@
* PCI controller init
*--------------------------------------------------------------------------*/
hose->first_busno = 0;
- hose->last_busno = 0xff;
+ hose->last_busno = 0;
/* PCI I/O space */
pci_set_region(hose->regions + reg_num++,
@@ -515,7 +515,7 @@
if (pci_pre_init (hose) == 0) {
printf("PCI: Board-specific initialization failed.\n");
printf("PCI: Configuration aborted.\n");
- return;
+ return -1;
}
pci_register_hose( hose );
@@ -578,13 +578,16 @@
#endif
hose->last_busno = pci_hose_scan(hose);
}
+ return hose->last_busno;
}
void pci_init_board(void)
{
- pci_440_init (&ppc440_hose);
+ int busno;
+
+ busno = pci_440_init (&ppc440_hose);
#if defined(CONFIG_440SPE)
- pcie_setup_hoses();
+ pcie_setup_hoses(busno + 1);
#endif
}