Initial revision
diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c
new file mode 100644
index 0000000..97b70a4
--- /dev/null
+++ b/board/eltec/elppc/elppc.c
@@ -0,0 +1,189 @@
+/*
+ * (C) Copyright 2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc106.h>
+#include <video_fb.h>
+
+/* ------------------------------------------------------------------------- */
+
+int checkboard (void)
+{
+ puts ("Board: ELTEC PowerPC\n");
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int checkflash (void)
+{
+ /* TODO */
+ printf ("Test not implemented !\n");
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static unsigned int mpc106_read_cfg_dword (unsigned int reg)
+{
+ unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
+
+ out32r(MPC106_REG_ADDR, reg_addr);
+
+ return (in32r(MPC106_REG_DATA | (reg & 0x3)));
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int dram_size (int board_type)
+{
+ /*
+ * No actual initialisation to do - done when setting up
+ * PICRs MCCRs ME/SARs etc in asm_init.S.
+ */
+
+ register unsigned long i, msar1, mear1, memSize;
+
+#if defined(CFG_MEMTEST)
+ register unsigned long reg;
+
+ printf("Testing DRAM\n");
+
+ /* write each mem addr with it's address */
+ for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
+ *reg = reg;
+
+ for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
+ {
+ if (*reg != reg)
+ return -1;
+ }
+#endif
+
+ /*
+ * Since MPC107 memory controller chip has already been set to
+ * control all memory, just read and interpret its memory boundery register.
+ */
+ memSize = 0;
+ msar1 = mpc106_read_cfg_dword(MPC106_MSAR1);
+ mear1 = mpc106_read_cfg_dword(MPC106_MEAR1);
+ i = mpc106_read_cfg_dword(MPC106_MBER) & 0xf;
+
+ do
+ {
+ if (i & 0x01) /* is bank enabled ? */
+ memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
+ msar1 >>= 8;
+ mear1 >>= 8;
+ i >>= 1;
+ } while (i);
+
+ return (memSize * 0x100000);
+}
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+ return dram_size(board_type);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * The BAB 911 can be reset by writing bit 0 of the Processor Initialization
+ * Register PI in the MPC 107 (at offset 0x41090 of the Embedded Utilities
+ * Memory Block).
+ */
+void do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+ out8(MPC107_EUMB_PI, 1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+
+/*
+ * Since the 7xx CPUs don't have an internal watchdog, this function is
+ * board specific.
+ */
+void watchdog_reset(void)
+{
+}
+#endif /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
+
+void after_reloc (ulong dest_addr)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*
+ * Jump to the main U-Boot board init code
+ */
+ board_init_r(gd, dest_addr);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+extern GraphicDevice smi;
+
+void video_get_info_str (int line_number, char *info)
+{
+ /* init video info strings for graphic console */
+ switch (line_number)
+ {
+ case 1:
+ sprintf (info," MPC7xx V%d.%d at %d / %d MHz",
+ (get_pvr() >> 8) & 0xFF,
+ get_pvr() & 0xFF,
+ 400,
+ 100);
+ return;
+ case 2:
+ sprintf (info, " ELTEC ELPPC with %ld MB DRAM and %ld MB FLASH",
+ dram_size(0)/0x100000,
+ flash_init()/0x100000);
+ return;
+ case 3:
+ sprintf (info, " %s", smi.modeIdent);
+ return;
+ }
+
+ /* no more info lines */
+ *info = 0;
+ return;
+}
+#endif
+
+
+
+
+
+
+
+
+
+