ARM: rmobile: Update M2 Koelsch

The M2 Koelsch port was broken since some time. This patch updates
the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/arch/arm/dts/r8a7791-koelsch-u-boot.dts b/arch/arm/dts/r8a7791-koelsch-u-boot.dts
index 9de45bb..58e15a4 100644
--- a/arch/arm/dts/r8a7791-koelsch-u-boot.dts
+++ b/arch/arm/dts/r8a7791-koelsch-u-boot.dts
@@ -8,3 +8,7 @@
 
 #include "r8a7791-koelsch.dts"
 #include "r8a7791-u-boot.dtsi"
+
+&scif0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32
index bcadb21..fe123f8 100644
--- a/arch/arm/mach-rmobile/Kconfig.32
+++ b/arch/arm/mach-rmobile/Kconfig.32
@@ -47,6 +47,9 @@
 	bool "Koelsch board"
 	select DM
 	select DM_SERIAL
+	select SUPPORT_SPL
+	select USE_TINY_PRINTF
+	select SPL_TINY_MEMSET
 
 config TARGET_LAGER
 	bool "Lager board"
diff --git a/board/renesas/koelsch/Makefile b/board/renesas/koelsch/Makefile
index 15f111c..77cf067 100644
--- a/board/renesas/koelsch/Makefile
+++ b/board/renesas/koelsch/Makefile
@@ -6,4 +6,8 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 
-obj-y	:= koelsch.o qos.o ../rcar-common/common.o
+ifdef CONFIG_SPL_BUILD
+obj-y	:= koelsch_spl.o
+else
+obj-y	:= koelsch.o qos.o
+endif
diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c
index e7b47ae..4a4007b 100644
--- a/board/renesas/koelsch/koelsch.c
+++ b/board/renesas/koelsch/koelsch.c
@@ -48,13 +48,7 @@
 	qos_init();
 }
 
-#define TMU0_MSTP125	(1 << 25)
-#define SCIF0_MSTP721	(1 << 21)
-#define ETHER_MSTP813	(1 << 13)
-
-#define SDHI0_MSTP314	(1 << 14)
-#define SDHI1_MSTP312	(1 << 12)
-#define SDHI2_MSTP311	(1 << 11)
+#define TMU0_MSTP125	BIT(25)
 
 #define SD1CKCR		0xE6150078
 #define SD2CKCR		0xE615026C
@@ -64,16 +58,6 @@
 {
 	mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
 
-	/* SCIF0 */
-	mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
-
-	/* ETHER */
-	mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
-
-	/* SDHI  */
-	mstp_clrbits_le32(MSTPSR3, SMSTPCR3,
-			  SDHI0_MSTP314 | SDHI1_MSTP312 | SDHI2_MSTP311);
-
 	/*
 	 * SD0 clock is set to 97.5MHz by default.
 	 * Set SD1 and SD2 to the 97.5MHz as well.
@@ -84,133 +68,40 @@
 	return 0;
 }
 
-/* LSI pin pull-up control */
-#define PUPR5 0xe6060114
-#define PUPR5_ETH 0x3FFC0000
-#define PUPR5_ETH_MAGIC	(1 << 27)
+#define ETHERNET_PHY_RESET	176	/* GPIO 5 22 */
+
 int board_init(void)
 {
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-	/* Init PFC controller */
-	r8a7791_pinmux_init();
-
-	/* ETHER Enable */
-	gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
-	gpio_request(GPIO_FN_ETH_RX_ER, NULL);
-	gpio_request(GPIO_FN_ETH_RXD0, NULL);
-	gpio_request(GPIO_FN_ETH_RXD1, NULL);
-	gpio_request(GPIO_FN_ETH_LINK, NULL);
-	gpio_request(GPIO_FN_ETH_REFCLK, NULL);
-	gpio_request(GPIO_FN_ETH_MDIO, NULL);
-	gpio_request(GPIO_FN_ETH_TXD1, NULL);
-	gpio_request(GPIO_FN_ETH_TX_EN, NULL);
-	gpio_request(GPIO_FN_ETH_TXD0, NULL);
-	gpio_request(GPIO_FN_ETH_MDC, NULL);
-	gpio_request(GPIO_FN_IRQ0, NULL);
-
-	mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC);
-	gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */
-	mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC);
-
-	gpio_direction_output(GPIO_GP_5_22, 0);
-	mdelay(20);
-	gpio_set_value(GPIO_GP_5_22, 1);
-	udelay(1);
+	/* Force ethernet PHY out of reset */
+	gpio_request(ETHERNET_PHY_RESET, "phy_reset");
+	gpio_direction_output(ETHERNET_PHY_RESET, 0);
+	mdelay(10);
+	gpio_direction_output(ETHERNET_PHY_RESET, 1);
 
 	return 0;
 }
 
-#define CXR24 0xEE7003C0 /* MAC address high register */
-#define CXR25 0xEE7003C8 /* MAC address low register */
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SH_ETHER
-	int ret = -ENODEV;
-	u32 val;
-	unsigned char enetaddr[6];
-
-	ret = sh_eth_initialize(bis);
-	if (!eth_env_get_enetaddr("ethaddr", enetaddr))
-		return ret;
-
-	/* Set Mac address */
-	val = enetaddr[0] << 24 | enetaddr[1] << 16 |
-		enetaddr[2] << 8 | enetaddr[3];
-	writel(val, CXR24);
-
-	val = enetaddr[4] << 8 | enetaddr[5];
-	writel(val, CXR25);
-
-	return ret;
-#else
-	return 0;
-#endif
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	int ret = -ENODEV;
-
-#ifdef CONFIG_SH_SDHI
-	gpio_request(GPIO_FN_SD0_DATA0, NULL);
-	gpio_request(GPIO_FN_SD0_DATA1, NULL);
-	gpio_request(GPIO_FN_SD0_DATA2, NULL);
-	gpio_request(GPIO_FN_SD0_DATA3, NULL);
-	gpio_request(GPIO_FN_SD0_CLK, NULL);
-	gpio_request(GPIO_FN_SD0_CMD, NULL);
-	gpio_request(GPIO_FN_SD0_CD, NULL);
-	gpio_request(GPIO_FN_SD2_DATA0, NULL);
-	gpio_request(GPIO_FN_SD2_DATA1, NULL);
-	gpio_request(GPIO_FN_SD2_DATA2, NULL);
-	gpio_request(GPIO_FN_SD2_DATA3, NULL);
-	gpio_request(GPIO_FN_SD2_CLK, NULL);
-	gpio_request(GPIO_FN_SD2_CMD, NULL);
-	gpio_request(GPIO_FN_SD2_CD, NULL);
-
-	/* SDHI 0 */
-	gpio_request(GPIO_GP_7_17, NULL);
-	gpio_request(GPIO_GP_2_12, NULL);
-	gpio_direction_output(GPIO_GP_7_17, 1); /* power on */
-	gpio_direction_output(GPIO_GP_2_12, 1); /* 1: 3.3V, 0: 1.8V */
-
-	ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
-			   SH_SDHI_QUIRK_16BIT_BUF);
-	if (ret)
-		return ret;
-
-	/* SDHI 1 */
-	gpio_request(GPIO_GP_7_18, NULL);
-	gpio_request(GPIO_GP_2_13, NULL);
-	gpio_direction_output(GPIO_GP_7_18, 1); /* power on */
-	gpio_direction_output(GPIO_GP_2_13, 1); /* 1: 3.3V, 0: 1.8V */
-
-	ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
-	if (ret)
-		return ret;
-
-	/* SDHI 2 */
-	gpio_request(GPIO_GP_7_19, NULL);
-	gpio_request(GPIO_GP_2_26, NULL);
-	gpio_direction_output(GPIO_GP_7_19, 1); /* power on */
-	gpio_direction_output(GPIO_GP_2_26, 1); /* 1: 3.3V, 0: 1.8V */
-
-	ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0);
-#endif
-	return ret;
-}
-
 int dram_init(void)
 {
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+	if (fdtdec_setup_memory_size() != 0)
+		return -EINVAL;
 
 	return 0;
 }
 
-/* koelsch has KSZ8041NL/RNL */
-#define PHY_CONTROL1	0x1E
-#define PHY_LED_MODE	0xC0000
+int dram_init_banksize(void)
+{
+	fdtdec_setup_memory_banksize();
+
+	return 0;
+}
+
+/* Koelsch has KSZ8041NL/RNL */
+#define PHY_CONTROL1		0x1E
+#define PHY_LED_MODE		0xC0000
 #define PHY_LED_MODE_ACK	0x4000
 int board_phy_config(struct phy_device *phydev)
 {
@@ -228,22 +119,38 @@
 
 void reset_cpu(ulong addr)
 {
-	u8 val;
+	struct udevice *dev;
+	const u8 pmic_bus = 6;
+	const u8 pmic_addr = 0x58;
+	u8 data;
+	int ret;
 
-	i2c_set_bus_num(2); /* PowerIC connected to ch2 */
-	i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
-	val |= 0x02;
-	i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+	ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev);
+	if (ret)
+		hang();
+
+	ret = dm_i2c_read(dev, 0x13, &data, 1);
+	if (ret)
+		hang();
+
+	data |= BIT(1);
+
+	ret = dm_i2c_write(dev, 0x13, &data, 1);
+	if (ret)
+		hang();
 }
 
-static const struct sh_serial_platdata serial_platdata = {
-	.base = SCIF0_BASE,
-	.type = PORT_SCIF,
-	.clk = 14745600,
-	.clk_mode = EXT_CLK,
-};
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	const u32 load_magic = 0xb33fc0de;
 
-U_BOOT_DEVICE(koelsch_serials) = {
-	.name = "serial_sh",
-	.platdata = &serial_platdata,
-};
+	/* Block environment access if loaded using JTAG */
+	if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) &&
+	    (op != ENVOP_INIT))
+		return ENVL_UNKNOWN;
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+	return ENVL_SPI_FLASH;
+}
diff --git a/board/renesas/koelsch/koelsch_spl.c b/board/renesas/koelsch/koelsch_spl.c
new file mode 100644
index 0000000..de6c1c0
--- /dev/null
+++ b/board/renesas/koelsch/koelsch_spl.c
@@ -0,0 +1,410 @@
+/*
+ * board/renesas/koelsch/koelsch_spl.c
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <dm/platform_data/serial_sh.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+
+#include <spl.h>
+
+#define TMU0_MSTP125	BIT(25)
+#define SCIF0_MSTP721	BIT(21)
+#define QSPI_MSTP917	BIT(17)
+
+#define SD2CKCR		0xE615026C
+#define SD_97500KHZ	0x7
+
+struct reg_config {
+	u16	off;
+	u32	val;
+};
+
+static void dbsc_wait(u16 reg)
+{
+	static const u32 dbsc3_0_base = DBSC3_0_BASE;
+	static const u32 dbsc3_1_base = DBSC3_0_BASE + 0x10000;
+
+	while (!(readl(dbsc3_0_base + reg) & BIT(0)))
+		;
+
+	while (!(readl(dbsc3_1_base + reg) & BIT(0)))
+		;
+}
+
+static void spl_init_sys(void)
+{
+	u32 r0 = 0;
+
+	writel(0xa5a5a500, 0xe6020004);
+	writel(0xa5a5a500, 0xe6030004);
+
+	asm volatile(
+		/* ICIALLU - Invalidate I$ to PoU */
+		"mcr	15, 0, %0, cr7, cr5, 0	\n"
+		/* BPIALL - Invalidate branch predictors */
+		"mcr	15, 0, %0, cr7, cr5, 6	\n"
+		/* Set SCTLR[IZ] */
+		"mrc	15, 0, %0, cr1, cr0, 0	\n"
+		"orr	%0, #0x1800		\n"
+		"mcr	15, 0, %0, cr1, cr0, 0	\n"
+		"isb	sy			\n"
+		:"=r"(r0));
+}
+
+static void spl_init_pfc(void)
+{
+	static const struct reg_config pfc_with_unlock[] = {
+		{ 0x0090, 0x60000000 },
+		{ 0x0094, 0x60000000 },
+		{ 0x0098, 0x00800200 },
+		{ 0x009c, 0x00000000 },
+		{ 0x0020, 0x00000000 },
+		{ 0x0024, 0x00000000 },
+		{ 0x0028, 0x000244c8 },
+		{ 0x002c, 0x00000000 },
+		{ 0x0030, 0x00002400 },
+		{ 0x0034, 0x01520000 },
+		{ 0x0038, 0x00724003 },
+		{ 0x003c, 0x00000000 },
+		{ 0x0040, 0x00000000 },
+		{ 0x0044, 0x00000000 },
+		{ 0x0048, 0x00000000 },
+		{ 0x004c, 0x00000000 },
+		{ 0x0050, 0x00000000 },
+		{ 0x0054, 0x00000000 },
+		{ 0x0058, 0x00000000 },
+		{ 0x005c, 0x00000000 },
+		{ 0x0160, 0x00000000 },
+		{ 0x0004, 0xffffffff },
+		{ 0x0008, 0x00ec3fff },
+		{ 0x000c, 0x3bc001e7 },
+		{ 0x0010, 0x5bffffff },
+		{ 0x0014, 0x1ffffffb },
+		{ 0x0018, 0x01bffff0 },
+		{ 0x001c, 0xcf7fffff },
+		{ 0x0074, 0x0381fc00 },
+	};
+
+	static const struct reg_config pfc_without_unlock[] = {
+		{ 0x0100, 0xffffffdf },
+		{ 0x0104, 0xc883c3ff },
+		{ 0x0108, 0x1201f3c9 },
+		{ 0x010c, 0x00000000 },
+		{ 0x0110, 0xffffeb04 },
+		{ 0x0114, 0xc003ffff },
+		{ 0x0118, 0x0800000f },
+		{ 0x011c, 0x001800f0 },
+	};
+
+	static const u32 pfc_base = 0xe6060000;
+
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) {
+		writel(~pfc_with_unlock[i].val, pfc_base);
+		writel(pfc_with_unlock[i].val,
+		       pfc_base | pfc_with_unlock[i].off);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++)
+		writel(pfc_without_unlock[i].val,
+		       pfc_base | pfc_without_unlock[i].off);
+}
+
+static void spl_init_gpio(void)
+{
+	static const u16 gpio_offs[] = {
+		0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x5400, 0x5800
+	};
+
+	static const struct reg_config gpio_set[] = {
+		{ 0x2000, 0x04381000 },
+		{ 0x5000, 0x00000000 },
+		{ 0x5800, 0x000e0000 },
+
+	};
+
+	static const struct reg_config gpio_clr[] = {
+		{ 0x1000, 0x00000000 },
+		{ 0x2000, 0x04381010 },
+		{ 0x3000, 0x00000000 },
+		{ 0x4000, 0x00000000 },
+		{ 0x5000, 0x00400000 },
+		{ 0x5400, 0x00000000 },
+		{ 0x5800, 0x000e0380 },
+	};
+
+	static const u32 gpio_base = 0xe6050000;
+
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
+		writel(0, gpio_base | 0x20 | gpio_offs[i]);
+
+	for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
+		writel(0, gpio_base | 0x00 | gpio_offs[i]);
+
+	for (i = 0; i < ARRAY_SIZE(gpio_set); i++)
+		writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off);
+
+	for (i = 0; i < ARRAY_SIZE(gpio_clr); i++)
+		writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off);
+}
+
+static void spl_init_lbsc(void)
+{
+	static const struct reg_config lbsc_config[] = {
+		{ 0x00, 0x00000020 },
+		{ 0x08, 0x00002020 },
+		{ 0x30, 0x2a103320 },
+		{ 0x38, 0xff70ff70 },
+	};
+
+	static const u16 lbsc_offs[] = {
+		0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8, 0x180
+	};
+
+	static const u32 lbsc_base = 0xfec00200;
+
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) {
+		writel(lbsc_config[i].val,
+		       lbsc_base | lbsc_config[i].off);
+		writel(lbsc_config[i].val,
+		       lbsc_base | (lbsc_config[i].off + 4));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++)
+		writel(0, lbsc_base | lbsc_offs[i]);
+}
+
+static void spl_init_dbsc(void)
+{
+	static const struct reg_config dbsc_config1[] = {
+		{ 0x0018, 0x21000000 },
+		{ 0x0018, 0x11000000 },
+		{ 0x0018, 0x10000000 },
+		{ 0x0280, 0x0000a55a },
+		{ 0x0290, 0x00000010 },
+		{ 0x02a0, 0xf004649b },
+		{ 0x0020, 0x00000007 },
+		{ 0x0024, 0x0f030a02 },
+		{ 0x0030, 0x00000001 },
+		{ 0x00b0, 0x00000000 },
+		{ 0x0040, 0x0000000b },
+		{ 0x0044, 0x00000008 },
+		{ 0x0048, 0x00000000 },
+		{ 0x0050, 0x0000000b },
+		{ 0x0054, 0x000c000b },
+		{ 0x0058, 0x00000027 },
+		{ 0x005c, 0x0000001c },
+		{ 0x0060, 0x00000006 },
+		{ 0x0064, 0x00000020 },
+		{ 0x0068, 0x00000008 },
+		{ 0x006c, 0x0000000c },
+		{ 0x0070, 0x00000009 },
+		{ 0x0074, 0x00000012 },
+		{ 0x0078, 0x000000d0 },
+		{ 0x007c, 0x00140005 },
+		{ 0x0080, 0x00050004 },
+		{ 0x0084, 0x70233005 },
+		{ 0x0088, 0x000c0000 },
+		{ 0x008c, 0x00000300 },
+		{ 0x0090, 0x00000040 },
+		{ 0x0100, 0x00000001 },
+		{ 0x00c0, 0x00020001 },
+		{ 0x00c8, 0x20082008 },
+		{ 0x0380, 0x00020002 },
+		{ 0x0390, 0x0000001f },
+	};
+
+	static const struct reg_config dbsc_config5[] = {
+		{ 0x0244, 0x00000011 },
+		{ 0x0290, 0x00000006 },
+		{ 0x02a0, 0x0005c000 },
+		{ 0x0290, 0x00000003 },
+		{ 0x02a0, 0x0300c481 },
+		{ 0x0290, 0x00000023 },
+		{ 0x02a0, 0x00fdb6c0 },
+		{ 0x0290, 0x00000011 },
+		{ 0x02a0, 0x1000040b },
+		{ 0x0290, 0x00000012 },
+		{ 0x02a0, 0x9d9cbb66 },
+		{ 0x0290, 0x00000013 },
+		{ 0x02a0, 0x1a868400 },
+		{ 0x0290, 0x00000014 },
+		{ 0x02a0, 0x300214d8 },
+		{ 0x0290, 0x00000015 },
+		{ 0x02a0, 0x00000d70 },
+		{ 0x0290, 0x00000016 },
+		{ 0x02a0, 0x00000006 },
+		{ 0x0290, 0x00000017 },
+		{ 0x02a0, 0x00000018 },
+		{ 0x0290, 0x0000001a },
+		{ 0x02a0, 0x910035c7 },
+		{ 0x0290, 0x00000004 },
+	};
+
+	static const struct reg_config dbsc_config6[] = {
+		{ 0x0290, 0x00000001 },
+		{ 0x02a0, 0x00000181 },
+		{ 0x0018, 0x11000000 },
+		{ 0x0290, 0x00000004 },
+	};
+
+	static const struct reg_config dbsc_config7[] = {
+		{ 0x0290, 0x00000001 },
+		{ 0x02a0, 0x0000fe01 },
+		{ 0x0290, 0x00000004 },
+	};
+
+	static const struct reg_config dbsc_config8[] = {
+		{ 0x0304, 0x00000000 },
+		{ 0x00f4, 0x01004c20 },
+		{ 0x00f8, 0x014000aa },
+		{ 0x00e0, 0x00000140 },
+		{ 0x00e4, 0x00081860 },
+		{ 0x00e8, 0x00010000 },
+		{ 0x0014, 0x00000001 },
+		{ 0x0010, 0x00000001 },
+		{ 0x0280, 0x00000000 },
+	};
+
+	static const u32 dbsc3_0_base = DBSC3_0_BASE;
+	static const u32 dbsc3_1_base = DBSC3_0_BASE + 0x10000;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) {
+		writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off);
+		writel(dbsc_config1[i].val, dbsc3_1_base | dbsc_config1[i].off);
+	}
+
+	dbsc_wait(0x240);
+
+	for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) {
+		writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off);
+		writel(dbsc_config5[i].val, dbsc3_1_base | dbsc_config5[i].off);
+	}
+
+	dbsc_wait(0x2a0);
+
+	for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) {
+		writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off);
+		writel(dbsc_config6[i].val, dbsc3_1_base | dbsc_config6[i].off);
+	}
+
+	dbsc_wait(0x2a0);
+
+	for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) {
+		writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off);
+		writel(dbsc_config7[i].val, dbsc3_1_base | dbsc_config7[i].off);
+	}
+
+	dbsc_wait(0x2a0);
+
+	for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) {
+		writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off);
+		writel(dbsc_config8[i].val, dbsc3_1_base | dbsc_config8[i].off);
+	}
+
+}
+
+static void spl_init_qspi(void)
+{
+	mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917);
+
+	static const u32 qspi_base = 0xe6b10000;
+
+	writeb(0x08, qspi_base + 0x00);
+	writeb(0x00, qspi_base + 0x01);
+	writeb(0x06, qspi_base + 0x02);
+	writeb(0x01, qspi_base + 0x0a);
+	writeb(0x00, qspi_base + 0x0b);
+	writeb(0x00, qspi_base + 0x0c);
+	writeb(0x00, qspi_base + 0x0d);
+	writeb(0x00, qspi_base + 0x0e);
+
+	writew(0xe080, qspi_base + 0x10);
+
+	writeb(0xc0, qspi_base + 0x18);
+	writeb(0x00, qspi_base + 0x18);
+	writeb(0x00, qspi_base + 0x08);
+	writeb(0x48, qspi_base + 0x00);
+}
+
+void board_init_f(ulong dummy)
+{
+	int i;
+
+	mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+	mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+
+	/*
+	 * SD0 clock is set to 97.5MHz by default.
+	 * Set SD2 to the 97.5MHz as well.
+	 */
+	writel(SD_97500KHZ, SD2CKCR);
+
+	spl_init_sys();
+	spl_init_pfc();
+	spl_init_gpio();
+	spl_init_lbsc();
+
+	/* Unknown, likely ES1.0-specific delay */
+	for (i = 0; i < 100000; i++)
+		asm volatile("nop");
+
+	spl_init_dbsc();
+	spl_init_qspi();
+}
+
+void spl_board_init(void)
+{
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	const u32 jtag_magic = 0x1337c0de;
+	const u32 load_magic = 0xb33fc0de;
+
+	/*
+	 * If JTAG probe sets special word at 0xe6300020, then it must
+	 * put U-Boot into RAM and SPL will start it from RAM.
+	 */
+	if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) {
+		printf("JTAG boot detected!\n");
+
+		while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic)
+			;
+
+		spl_boot_list[0] = BOOT_DEVICE_RAM;
+		spl_boot_list[1] = BOOT_DEVICE_NONE;
+
+		return;
+	}
+
+	/* Boot from SPI NOR with YMODEM UART fallback. */
+	spl_boot_list[0] = BOOT_DEVICE_SPI;
+	spl_boot_list[1] = BOOT_DEVICE_UART;
+	spl_boot_list[2] = BOOT_DEVICE_NONE;
+}
+
+void reset_cpu(ulong addr)
+{
+}
diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig
index 1246dde..8875b59 100644
--- a/configs/koelsch_defconfig
+++ b/configs/koelsch_defconfig
@@ -1,17 +1,37 @@
 CONFIG_ARM=y
+CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_RMOBILE=y
-CONFIG_SYS_TEXT_BASE=0xE6304000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x50000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_R8A7791=y
 CONFIG_TARGET_KOELSCH=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_DEFAULT_DEVICE_TREE="r8a7791-koelsch-u-boot"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_SDRAM=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
@@ -19,21 +39,42 @@
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_DM_GPIO=y
+CONFIG_RCAR_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_DM_MMC=y
+CONFIG_RENESAS_SDHI=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_MICREL=y
-CONFIG_NETDEVICES=y
+CONFIG_DM_ETH=y
 CONFIG_SH_ETHER=y
-CONFIG_BAUDRATE=38400
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_PFC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SH_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
index 4d093de..6b2af7a 100644
--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@@ -14,15 +14,9 @@
 
 #include "rcar-gen2-common.h"
 
-/* STACK */
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR		0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		0xE633fffC
-#endif
-
-#define STACK_AREA_SIZE			0xC000
-#define LOW_LEVEL_MERAM_STACK	\
+#define CONFIG_SYS_INIT_SP_ADDR		0x4f000000
+#define STACK_AREA_SIZE			0x00100000
+#define LOW_LEVEL_MERAM_STACK \
 		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
 
 /* MEMORY */
@@ -41,45 +35,29 @@
 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SH_ETHER_CACHE_WRITEBACK
 #define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE	64
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
-#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
 
 /* Board Clock */
 #define RMOBILE_XTAL_CLK	20000000u
 #define CONFIG_SYS_CLK_FREQ	RMOBILE_XTAL_CLK
 #define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
+
 #define CONFIG_SYS_TMU_CLK_DIV	4
 
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	3
-#define CONFIG_SYS_I2C_SH_SPEED0	400000
-#define CONFIG_SYS_I2C_SH_SPEED1	400000
-#define CONFIG_SYS_I2C_SH_SPEED2	400000
-#define CONFIG_SH_I2C_DATA_HIGH	4
-#define CONFIG_SH_I2C_DATA_LOW	5
-#define CONFIG_SH_I2C_CLOCK	10000000
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fdt_high=0xffffffff\0"		\
+	"initrd_high=0xffffffff\0"
 
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA	0x00400000
-/* MSIF*/
-#define CONFIG_SMSTP2_ENA	0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA	0x00000180
-/* SCIF0 */
-#define CONFIG_SMSTP7_ENA	0x00200000
-
-/* SD */
-#define CONFIG_SH_SDHI_FREQ	97500000
+/* SPL support */
+#define CONFIG_SPL_TEXT_BASE		0xe6300000
+#define CONFIG_SPL_STACK		0xe6340000
+#define CONFIG_SPL_MAX_SIZE		0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF0
+#define CONFIG_SH_SCIF_CLK_FREQ		65000000
+#endif
 
 #endif	/* __KOELSCH_H */