mx53loco: Remove unused mx53loco_video.c file
Since commit 1fa43cad8625 ("video: Drop references to CONFIG_VIDEO et al")
the mx53loco_video.c is no longer used.
Remove the unused file.
Signed-off-by: Fabio Estevam <festevam@denx.de>
diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
deleted file mode 100644
index ff3fc8c..0000000
--- a/board/freescale/mx53loco/mx53loco_video.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
-#include <asm/arch/iomux-mx53.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX53LOCO_LCD_POWER IMX_GPIO_NR(3, 24)
-
-static struct fb_videomode const claa_wvga = {
- .name = "CLAA07LC0ACW",
- .refresh = 57,
- .xres = 800,
- .yres = 480,
- .pixclock = 37037,
- .left_margin = 40,
- .right_margin = 60,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-static struct fb_videomode const seiko_wvga = {
- .name = "Seiko-43WVF1G",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = 0,
-};
-
-void setup_iomux_lcd(void)
-{
- static const iomux_v3_cfg_t lcd_pads[] = {
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
- };
-
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-
- /* Turn on GPIO backlight */
- imx_iomux_v3_setup_pad(MX53_PAD_EIM_D24__GPIO3_24);
- gpio_direction_output(MX53LOCO_LCD_POWER, 1);
-
- /* Turn on display contrast */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
- gpio_direction_output(IMX_GPIO_NR(1, 1), 1);
-}
-
-int board_video_skip(void)
-{
- int ret;
- char const *e = env_get("panel");
-
- if (e) {
- if (strcmp(e, "seiko") == 0) {
- ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24);
- if (ret)
- printf("Seiko cannot be configured: %d\n", ret);
- return ret;
- }
- }
-
- /*
- * 'panel' env variable not found or has different value than 'seiko'
- * Defaulting to claa lcd.
- */
- ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
- if (ret)
- printf("CLAA cannot be configured: %d\n", ret);
- return ret;
-}