mmc: Fix handling of bus widths and DDR card capabilities
If the MMC_MODE_DDR_52MHz flag is set in card capabilities bitmask,
it is never cleared, even if switching to DDR mode fails, and if
the controller driver uses this flag to check the DDR mode, it can
take incorrect actions.
Also, DDR related checks in mmc_startup() incorrectly handle the case
when the host controller does not support some bus widths (e.g. can't
support 8 bits), since the host_caps is checked for DDR bit, but not
bus width bits.
This fix clearly separates using of card_caps bitmask, having there
the flags for the capabilities, that the card can support, and actual
operation mode, described outside of card_caps (i.e. bus_width and
ddr_mode fields in mmc structure). Separate host controller drivers
may need to be updated to use the actual flags. Respectively,
the capabilities checks in mmc_startup are made more correct and clear.
Also, some clean up is made with errors handling and code syntax layout.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 4286e26..96478e4 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -90,7 +90,8 @@
puts("Capacity: ");
print_size(mmc->capacity, "\n");
- printf("Bus Width: %d-bit\n", mmc->bus_width);
+ printf("Bus Width: %d-bit%s\n", mmc->bus_width,
+ mmc->ddr_mode ? " DDR" : "");
}
static struct mmc *init_mmc_device(int dev, bool force_init)
{
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 99f03c9..a290031 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -159,7 +159,7 @@
{
struct mmc_cmd cmd;
- if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ if (mmc->ddr_mode)
return 0;
cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
@@ -486,7 +486,7 @@
char cardtype;
int err;
- mmc->card_caps = 0;
+ mmc->card_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
if (mmc_host_is_spi(mmc))
return 0;
@@ -1121,8 +1121,10 @@
/* An array to map CSD bus widths to host cap bits */
static unsigned ext_to_hostcaps[] = {
- [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz,
- [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz,
+ [EXT_CSD_DDR_BUS_WIDTH_4] =
+ MMC_MODE_DDR_52MHz | MMC_MODE_4BIT,
+ [EXT_CSD_DDR_BUS_WIDTH_8] =
+ MMC_MODE_DDR_52MHz | MMC_MODE_8BIT,
[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
};
@@ -1134,13 +1136,13 @@
for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
unsigned int extw = ext_csd_bits[idx];
+ unsigned int caps = ext_to_hostcaps[extw];
/*
- * Check to make sure the controller supports
- * this bus width, if it's more than 1
+ * Check to make sure the card and controller support
+ * these capabilities
*/
- if (extw != EXT_CSD_BUS_WIDTH_1 &&
- !(mmc->cfg->host_caps & ext_to_hostcaps[extw]))
+ if ((mmc->card_caps & caps) != caps)
continue;
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
@@ -1149,26 +1151,33 @@
if (err)
continue;
+ mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0;
mmc_set_bus_width(mmc, widths[idx]);
err = mmc_send_ext_csd(mmc, test_csd);
- /* Only compare read only fields */
- if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
- == test_csd[EXT_CSD_PARTITIONING_SUPPORT]
- && ext_csd[EXT_CSD_HC_WP_GRP_SIZE] \
- == test_csd[EXT_CSD_HC_WP_GRP_SIZE] \
- && ext_csd[EXT_CSD_REV] \
- == test_csd[EXT_CSD_REV]
- && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \
- == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
- && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
- &test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
- mmc->card_caps |= ext_to_hostcaps[extw];
+ if (err)
+ continue;
+
+ /* Only compare read only fields */
+ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
+ == test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
+ == test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
+ ext_csd[EXT_CSD_REV]
+ == test_csd[EXT_CSD_REV] &&
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
+ == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
+ memcmp(&ext_csd[EXT_CSD_SEC_CNT],
+ &test_csd[EXT_CSD_SEC_CNT], 4) == 0)
break;
- }
+ else
+ err = SWITCH_ERR;
}
+ if (err)
+ return err;
+
if (mmc->card_caps & MMC_MODE_HS) {
if (mmc->card_caps & MMC_MODE_HS_52MHz)
mmc->tran_speed = 52000000;
@@ -1324,6 +1333,7 @@
if (err)
return err;
+ mmc->ddr_mode = 0;
mmc_set_bus_width(mmc, 1);
mmc_set_clock(mmc, 1);
diff --git a/include/mmc.h b/include/mmc.h
index fcea195..7ec255d 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -318,6 +318,7 @@
char init_in_progress; /* 1 if we have done mmc_start_init() */
char preinit; /* start init as early as possible */
uint op_cond_response; /* the response byte from the last op_cond */
+ int ddr_mode;
};
int mmc_register(struct mmc *mmc);