fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP
Add SFI analog parameters initialization values according to
latest ETP.
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 8ea5df2..21de90c 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -1166,8 +1166,11 @@
data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET;
mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK;
data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET;
- reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask);
+ } else {
+ mask = HPIPE_TXDIGCK_DIV_FORCE_MASK;
+ data = 0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET;
}
+ reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask);
/* Set analog paramters from ETP(HW) */
debug("stage: Analog paramters from ETP(HW)\n");
@@ -1213,13 +1216,27 @@
data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask);
/* 0xE-G1_Setting_1 */
- mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
- data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
- mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
- data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
- mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
- data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+ mask = HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
+ data = 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+ if (speed == PHY_SPEED_5_15625G) {
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+ } else {
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+ data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK;
+ data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+ data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+ data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+ mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+ data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+ }
reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
/* 0xA-DFE_Reg3 */
mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
@@ -1245,6 +1262,63 @@
}
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+ /* Connfigure RX training timer */
+ mask = HPIPE_RX_TRAIN_TIMER_MASK;
+ data = 0x13 << HPIPE_RX_TRAIN_TIMER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
+
+ /* Enable TX train peak to peak hold */
+ mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
+ data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
+
+ /* Configure TX preset index */
+ mask = HPIPE_TX_PRESET_INDEX_MASK;
+ data = 0x2 << HPIPE_TX_PRESET_INDEX_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_PRESET_INDEX_REG, data, mask);
+
+ /* Disable pattern lock lost timeout */
+ mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+ data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+ /* Configure TX training pattern and TX training 16bit auto */
+ mask = HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK;
+ data = 0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET;
+ mask |= HPIPE_TX_TRAIN_PAT_SEL_MASK;
+ data |= 0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
+
+ /* Configure Training patten number */
+ mask = HPIPE_TRAIN_PAT_NUM_MASK;
+ data = 0x88 << HPIPE_TRAIN_PAT_NUM_OFFSET;
+ reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_0_REG, data, mask);
+
+ /* Configure differencial manchester encoter to ethernet mode */
+ mask = HPIPE_DME_ETHERNET_MODE_MASK;
+ data = 0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DME_REG, data, mask);
+
+ /* Configure VDD Continuous Calibration */
+ mask = HPIPE_CAL_VDD_CONT_MODE_MASK;
+ data = 0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_0_REG, data, mask);
+
+ /* Trigger sampler enable pulse (by toggleing the bit) */
+ mask = HPIPE_RX_SAMPLER_OS_GAIN_MASK;
+ data = 0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET;
+ mask |= HPIPE_SMAPLER_MASK;
+ data |= 0x1 << HPIPE_SMAPLER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+ mask = HPIPE_SMAPLER_MASK;
+ data = 0x0 << HPIPE_SMAPLER_OFFSET;
+ reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+ /* Set External RX Regulator Control */
+ mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+ data = 0x1A << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
/* SERDES External Configuration */
mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;