gxp: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/board/hpe/gxp/gxp.env b/board/hpe/gxp/gxp.env
new file mode 100644
index 0000000..4760bf1
--- /dev/null
+++ b/board/hpe/gxp/gxp.env
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+recover_file=openbmc-hpe-recovery-image.mtd
+recover_cmd=usb start; mw.b 0xD100000D 0x40;
+ if fatload usb 0 0x50000000 $recover_file 0x4C0000 0x80000; then
+ setenv bootargs console=ttyS0,115200 recovery;
+ setenv force_recovery;
+ saveenv;
+ bootm 0x50000000;
+ else
+ while itest 0 < 1; do
+ mw.b 0xd1000005 0xc0;
+ sleep .1;
+ mw.b 0xd1000005 0x00;
+ sleep .1;
+ done;
+ fi;
+ reset;
+spiboot=if itest.b *0xD10000B2 == 6; then
+ run recover_cmd;
+ fi;
+ if printenv force_recovery; then
+ run recover_cmd;
+ else
+ bootm 0xfc080000;
+ run recover_cmd;
+ fi;
diff --git a/include/configs/gxp.h b/include/configs/gxp.h
index ae46126..e3c97b2 100644
--- a/include/configs/gxp.h
+++ b/include/configs/gxp.h
@@ -12,32 +12,4 @@
#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "recover_file=openbmc-hpe-recovery-image.mtd\0" \
- "recover_cmd=usb start; " \
- "mw.b 0xD100000D 0x40; " \
- "if fatload usb 0 0x50000000 $recover_file 0x4C0000 0x80000; then " \
- "setenv bootargs console=ttyS0,115200 recovery; " \
- "setenv force_recovery; " \
- "saveenv; " \
- "bootm 0x50000000; " \
- "else " \
- "while itest 0 < 1; do " \
- "mw.b 0xd1000005 0xc0; " \
- "sleep .1; " \
- "mw.b 0xd1000005 0x00; " \
- "sleep .1; " \
- "done; " \
- "fi; " \
- "reset;\0" \
- "spiboot=if itest.b *0xD10000B2 == 6; then " \
- "run recover_cmd;" \
- "fi;" \
- "if printenv force_recovery; then " \
- "run recover_cmd; " \
- "else " \
- "bootm 0xfc080000; " \
- "run recover_cmd; " \
- "fi;\0"
-
#endif