diff --git a/include/spl_load.h b/include/spl_load.h
new file mode 100644
index 0000000..406f8b5
--- /dev/null
+++ b/include/spl_load.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) Sean Anderson <seanga2@gmail.com>
+ */
+#ifndef	_SPL_LOAD_H_
+#define	_SPL_LOAD_H_
+
+#include <image.h>
+#include <imx_container.h>
+#include <mapmem.h>
+#include <spl.h>
+
+static inline int _spl_load(struct spl_image_info *spl_image,
+			    const struct spl_boot_device *bootdev,
+			    struct spl_load_info *info, size_t size,
+			    size_t offset)
+{
+	struct legacy_img_hdr *header =
+		spl_get_load_buffer(-sizeof(*header), sizeof(*header));
+	ulong base_offset, image_offset, overhead;
+	int read, ret;
+
+	read = info->read(info, offset, ALIGN(sizeof(*header),
+					      spl_get_bl_len(info)), header);
+	if (read < sizeof(*header))
+		return -EIO;
+
+	if (image_get_magic(header) == FDT_MAGIC) {
+		if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL)) {
+			void *buf;
+
+			/*
+			 * In order to support verifying images in the FIT, we
+			 * need to load the whole FIT into memory. Try and
+			 * guess how much we need to load by using the total
+			 * size. This will fail for FITs with external data,
+			 * but there's not much we can do about that.
+			 */
+			if (!size)
+				size = round_up(fdt_totalsize(header), 4);
+			buf = map_sysmem(CONFIG_SYS_LOAD_ADDR, size);
+			read = info->read(info, offset,
+					  ALIGN(size, spl_get_bl_len(info)),
+					  buf);
+			if (read < size)
+				return -EIO;
+
+			return spl_parse_image_header(spl_image, bootdev, buf);
+		}
+
+		if (IS_ENABLED(CONFIG_SPL_LOAD_FIT))
+			return spl_load_simple_fit(spl_image, info, offset,
+						   header);
+	}
+
+	if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) &&
+	    valid_container_hdr((void *)header))
+		return spl_load_imx_container(spl_image, info, offset);
+
+	if (IS_ENABLED(CONFIG_SPL_LZMA) &&
+	    image_get_magic(header) == IH_MAGIC &&
+	    image_get_comp(header) == IH_COMP_LZMA) {
+		spl_image->flags |= SPL_COPY_PAYLOAD_ONLY;
+		ret = spl_parse_image_header(spl_image, bootdev, header);
+		if (ret)
+			return ret;
+
+		return spl_load_legacy_lzma(spl_image, info, offset);
+	}
+
+	ret = spl_parse_image_header(spl_image, bootdev, header);
+	if (ret)
+		return ret;
+
+	base_offset = spl_image->offset;
+	/* Only NOR sets this flag. */
+	if (IS_ENABLED(CONFIG_SPL_NOR_SUPPORT) &&
+	    spl_image->flags & SPL_COPY_PAYLOAD_ONLY)
+		base_offset += sizeof(*header);
+	image_offset = ALIGN_DOWN(base_offset, spl_get_bl_len(info));
+	overhead = base_offset - image_offset;
+	size = ALIGN(spl_image->size + overhead, spl_get_bl_len(info));
+
+	read = info->read(info, offset + image_offset, size,
+			  map_sysmem(spl_image->load_addr - overhead, size));
+	return read < spl_image->size ? -EIO : 0;
+}
+
+/*
+ * Although spl_load results in size reduction for callers, this is generally
+ * not enough to counteract the bloat if there is only one caller. The core
+ * problem is that the compiler can't optimize across translation units. The
+ * general solution to this is CONFIG_LTO, but that is not available on all
+ * architectures. Perform a pseudo-LTO just for this function by declaring it
+ * inline if there is one caller, and extern otherwise.
+ */
+#define SPL_LOAD_USERS \
+	0
+
+#if SPL_LOAD_USERS > 1
+/**
+ * spl_load() - Parse a header and load the image
+ * @spl_image: Image data which will be filled in by this function
+ * @bootdev: The device to load from
+ * @info: Describes how to load additional information from @bootdev. At the
+ *        minimum, read() and bl_len must be populated.
+ * @size: The size of the image, in bytes, if it is known in advance. Some boot
+ *        devices (such as filesystems) know how big an image is before parsing
+ *        the header. If 0, then the size will be determined from the header.
+ * @offset: The offset from the start of @bootdev, in bytes. This should have
+ *          the offset @header was loaded from. It will be added to any offsets
+ *          passed to @info->read().
+ *
+ * This function determines the image type (FIT, legacy, i.MX, raw, etc), calls
+ * the appropriate parsing function, determines the load address, and the loads
+ * the image from storage. It is designed to replace ad-hoc image loading which
+ * may not support all image types (especially when config options are
+ * involved).
+ *
+ * Return: 0 on success, or a negative error on failure
+ */
+int spl_load(struct spl_image_info *spl_image,
+	     const struct spl_boot_device *bootdev, struct spl_load_info *info,
+	     size_t size, size_t offset);
+#else
+static inline int spl_load(struct spl_image_info *spl_image,
+			   const struct spl_boot_device *bootdev,
+			   struct spl_load_info *info, size_t size,
+			   size_t offset)
+{
+	return _spl_load(spl_image, bootdev, info, size, offset);
+}
+#endif
+
+#endif /* _SPL_LOAD_H_ */