armv8: LS2080A: Adjust memory map for secure boot headers for NOR-boot
This patch adjusts memory map for secure boot headers on LS2080AQDS
and LS2080ARDB platforms. Secure boot headers are placed on NOR
flash at offset 0x00600000.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index fd0e25a..cad860e 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -96,6 +96,7 @@
Boot firmware (U-Boot) 0x00100000
Boot firmware Environment 0x00300000
PPA firmware 0x00400000
+Secure Headers 0x00600000
DPAA2 MC 0x00A00000
DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
index f228d80..205c45c 100644
--- a/board/freescale/ls2080ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -92,6 +92,7 @@
Boot firmware (U-Boot) 0x00100000
Boot firmware Environment 0x00300000
PPA firmware 0x00400000
+Secure Headers 0x00600000
Cortina PHY firmware 0x00980000
DPAA2 MC 0x00A00000
DPAA2 DPL 0x00D00000
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 4788c15..84e9db2 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -359,14 +359,14 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581100000\0" \
+ "kernel_start=0x581000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"mcmemsize=0x40000000\0" \
- "mcinitcmd=esbc_validate 0x580c80000;" \
- "esbc_validate 0x580cc0000;" \
- "fsl_mc start mc 0x580300000" \
- " 0x580800000 \0"
+ "mcinitcmd=esbc_validate 0x580700000;" \
+ "esbc_validate 0x580740000;" \
+ "fsl_mc start mc 0x580a00000" \
+ " 0x580e00000 \0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 0e920f6..c20a7f4 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -378,15 +378,15 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581100000\0" \
+ "kernel_start=0x581000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"mcmemsize=0x40000000\0" \
"fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=esbc_validate 0x580c80000;" \
- "esbc_validate 0x580cc0000;" \
- "fsl_mc start mc 0x580300000" \
- " 0x580800000 \0" \
+ "mcinitcmd=esbc_validate 0x580700000;" \
+ "esbc_validate 0x580740000;" \
+ "fsl_mc start mc 0x580a00000" \
+ " 0x580e00000 \0" \
BOOTENV
#else
#ifdef CONFIG_QSPI_BOOT