diff --git a/board/freescale/mpc8569mds/Makefile b/board/freescale/mpc8569mds/Makefile
new file mode 100644
index 0000000..23805ea
--- /dev/null
+++ b/board/freescale/mpc8569mds/Makefile
@@ -0,0 +1,55 @@
+#
+# Copyright 2004-2009 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= bcsr.o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c
new file mode 100644
index 0000000..5adffc2
--- /dev/null
+++ b/board/freescale/mpc8569mds/bcsr.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "bcsr.h"
+
+void enable_8569mds_flash_write()
+{
+	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 11), BCSR17_FLASH_nWP);
+}
+
+void disable_8569mds_flash_write()
+{
+	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
+}
+
+void enable_8569mds_qe_mdio()
+{
+	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7),
+			BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN);
+	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8),
+			BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN);
+}
+
+void disable_8569mds_brd_eeprom_write_protect()
+{
+	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT);
+}
diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h
new file mode 100644
index 0000000..8efe9bd
--- /dev/null
+++ b/board/freescale/mpc8569mds/bcsr.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __BCSR_H_
+#define __BCSR_H_
+
+#include <common.h>
+
+/* BCSR Bit definitions*/
+/****************************************/
+/* BCSR defines                         */
+/****************************************/
+#define BCSR6_UPC1_EN		0x80
+#define BCSR6_UPC1_POS_EN	0x40
+#define BCSR6_UPC1_ADDR_EN	0x20
+#define BCSR6_UPC1_DEV2		0x10
+#define BCSR6_SD_ENABLE         0x04
+#define BCSR6_TDM2G_EN		0x02
+#define BCSR6_UCC7_RMII_EN	0x01
+
+#define BCSR7_UCC1_GETH_EN	0x80
+#define BCSR7_UCC1_RGMII_EN	0x40
+#define BCSR7_UCC1_RTBI_EN	0x20
+#define BCSR7_GETHRST_MRVL	0x04
+#define BCSR7_BRD_WRT_PROTECT	0x02
+
+#define BCSR8_UCC2_GETH_EN	0x80
+#define BCSR8_UCC2_RGMII_EN	0x40
+#define BCSR8_UCC2_RTBI_EN	0x20
+#define BCSR8_UEM_MARVEL_RESET	0x02
+
+#define BCSR9_UCC3_GETH_EN	0x80
+#define BCSR9_UCC3_RGMII_EN	0x40
+#define BCSR9_UCC3_RTBI_EN	0x20
+#define BCSR9_UCC3_RMII_EN	0x10
+#define BCSR9_UCC3_UEM_MICREL	0x01
+
+#define BCSR10_UCC4_GETH_EN	0x80
+#define BCSR10_UCC4_RGMII_EN	0x40
+#define BCSR10_UCC4_RTBI_EN	0x20
+
+#define BCSR11_LED0		0x40
+#define BCSR11_LED1		0x20
+#define BCSR11_LED2		0x10
+
+#define BCSR12_UCC6_RMII_EN	0x20
+#define BCSR12_UCC8_RMII_EN	0x20
+
+#define BCSR15_SMII6_DIS	0x08
+#define BCSR15_SMII8_DIS	0x04
+
+#define BCSR16_UPC1_DEV2	0x02
+
+#define BCSR17_FLASH_nWP	0x01
+
+/*BCSR Utils functions*/
+
+void enable_8569mds_flash_write(void);
+void disable_8569mds_flash_write(void);
+void enable_8569mds_qe_mdio(void);
+void disable_8569mds_brd_eeprom_write_protect(void);
+
+#endif	/* __BCSR_H_ */
diff --git a/board/freescale/mpc8569mds/config.mk b/board/freescale/mpc8569mds/config.mk
new file mode 100644
index 0000000..36b344e
--- /dev/null
+++ b/board/freescale/mpc8569mds/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8569mds board
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8569=1
diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c
new file mode 100644
index 0000000..4b4533e
--- /dev/null
+++ b/board/freescale/mpc8569mds/ddr.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void
+get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t));
+}
+
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+	return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+	unsigned int i;
+	unsigned int i2c_address = 0;
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+		if (ctrl_num == 0 && i == 0)
+			i2c_address = SPD_EEPROM_ADDRESS1;
+		if (ctrl_num == 0 && i == 1)
+			i2c_address = SPD_EEPROM_ADDRESS2;
+		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+	}
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	/*
+	 * Factors to consider for clock adjust:
+	 *	- number of chips on bus
+	 *	- position of slot
+	 *	- DDR1 vs. DDR2?
+	 *	- ???
+	 *
+	 * This needs to be determined on a board-by-board basis.
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	popts->clk_adjust = 6;
+
+	/*
+	 * Factors to consider for CPO:
+	 *	- frequency
+	 *	- ddr1 vs. ddr2
+	 */
+	popts->cpo_override = 0xff;
+
+	/*
+	 * Factors to consider for write data delay:
+	 *	- number of DIMMs
+	 *
+	 * 1 = 1/4 clock delay
+	 * 2 = 1/2 clock delay
+	 * 3 = 3/4 clock delay
+	 * 4 = 1   clock delay
+	 * 5 = 5/4 clock delay
+	 * 6 = 3/2 clock delay
+	 */
+	popts->write_data_delay = 2;
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+}
diff --git a/board/freescale/mpc8569mds/law.c b/board/freescale/mpc8569mds/law.c
new file mode 100644
index 0000000..e7381aa
--- /dev/null
+++ b/board/freescale/mpc8569mds/law.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ *0)   0x0000_0000   0x7fff_ffff     DDR                     2G
+ *1)   0xa000_0000   0xbfff_ffff     PCIe MEM                512MB
+ *-)   0xe000_0000   0xe00f_ffff     CCSR                    1M
+ *2)   0xe280_0000   0xe2ff_ffff     PCIe I/O                8M
+ *3)   0xc000_0000   0xdfff_ffff     SRIO                    512MB
+ *4.a) 0xf000_0000   0xf3ff_ffff     SDRAM                   64MB
+ *4.b) 0xf800_0000   0xf800_7fff     BCSR                    32KB
+ *4.c) 0xf800_8000   0xf800_ffff     PIB (CS4)		     32KB
+ *4.d) 0xf801_0000   0xf801_7fff     PIB (CS5)		     32KB
+ *4.e) 0xfe00_0000   0xffff_ffff     Flash                   32MB
+ *
+ *Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR),
+#endif
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
new file mode 100644
index 0000000..53fef43
--- /dev/null
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2009 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <ioports.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#include "bcsr.h"
+
+phys_size_t fixed_sdram(void);
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* QE_MUX_MDC */
+	{2,  31, 1, 0, 1}, /* QE_MUX_MDC               */
+
+	/* QE_MUX_MDIO */
+	{2,  30, 3, 0, 2}, /* QE_MUX_MDIO              */
+
+	/* UCC_1_RGMII */
+	{2, 11, 2, 0, 1}, /* CLK12 */
+	{0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
+	{0,  1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1      */
+	{0,  2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2      */
+	{0,  3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3      */
+	{0,  6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0      */
+	{0,  7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1      */
+	{0,  8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2      */
+	{0,  9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3      */
+	{0,  4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
+	{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B    */
+	{2,  8, 2, 0, 1}, /* ENET1_GRXCLK              */
+	{2, 20, 1, 0, 2}, /* ENET1_GTXCLK              */
+
+	/* UCC_2_RGMII */
+	{2, 16, 2, 0, 3}, /* CLK17 */
+	{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0      */
+	{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1      */
+	{0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2      */
+	{0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3      */
+	{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0      */
+	{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1      */
+	{0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2      */
+	{0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3      */
+	{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B    */
+	{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B    */
+	{2,  3, 2, 0, 1}, /* ENET2_GRXCLK              */
+	{2,  2, 1, 0, 2}, /* ENET2_GTXCLK              */
+
+	{0,  0, 0, 0, QE_IOP_TAB_END} /* END of table */
+};
+
+void local_bus_init(void);
+
+int board_early_init_f (void)
+{
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	enable_8569mds_flash_write();
+
+#ifdef CONFIG_QE
+	enable_8569mds_qe_mdio();
+#endif
+
+#if CONFIG_SYS_I2C2_OFFSET
+	/* Enable I2C2 signals instead of SD signals */
+	volatile struct ccsr_gur *gur;
+	gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
+	gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
+	gur->plppar1 |= PLPPAR1_I2C2_VAL;
+	gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
+	gur->plpdir1 |= PLPDIR1_I2C2_VAL;
+
+	disable_8569mds_brd_eeprom_write_protect();
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	printf ("Board: 8569 MDS\n");
+
+	return 0;
+}
+
+phys_size_t
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+	puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+	/*
+	 * Work around to stabilize DDR DLL MSYNC_IN.
+	 * Errata DDR9 seems to have been fixed.
+	 * This is now the workaround for Errata DDR11:
+	 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
+	 */
+	volatile ccsr_gur_t *gur =
+			(void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	out_be32(&gur->ddrdllcr, 0x81000000);
+	udelay(200);
+#endif
+
+#ifdef CONFIG_SPD_EEPROM
+	dram_size = fsl_ddr_sdram();
+#else
+	dram_size = fixed_sdram();
+#endif
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+phys_size_t fixed_sdram(void)
+{
+	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	uint d_init;
+
+	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
+	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
+	out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+	out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+	out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+	out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
+	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
+	out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
+	out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
+	out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
+	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
+	out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
+	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
+	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
+	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
+	out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
+	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
+#if defined (CONFIG_DDR_ECC)
+	out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
+	out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
+	out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
+#endif
+	udelay(500);
+
+	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	d_init = 1;
+	debug("DDR - 1st controller: memory initializing\n");
+	/*
+	 * Poll until memory is initialized.
+	 * 512 Meg at 400 might hit this 200 times or so.
+	 */
+	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
+		udelay(1000);
+	}
+	debug("DDR: memory initialized\n\n");
+	udelay(500);
+#endif
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+}
+#endif
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+
+	uint clkdiv;
+	uint lbc_hz;
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
+	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+	out_be32(&gur->lbiuiplldcr1, 0x00078080);
+	if (clkdiv == 16)
+		out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
+	else if (clkdiv == 8)
+		out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
+	else if (clkdiv == 4)
+		out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
+
+	out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
+}
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif  /* CONFIG_PCIE1 */
+
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
+int first_free_busno = 0;
+
+#ifdef CONFIG_PCI
+void
+pci_init_board(void)
+{
+	volatile ccsr_gur_t *gur;
+	uint io_sel;
+	uint host_agent;
+
+	gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+#ifdef CONFIG_PCIE1
+{
+	volatile ccsr_fsl_pci_t *pci;
+	struct pci_controller *hose;
+	int pcie_ep;
+	struct pci_region *r;
+	int pcie_configured;
+
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	hose = &pcie1_hose;
+	pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+	r = hose->regions;
+	pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing. Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_MEM_BUS,
+				CONFIG_SYS_PCIE1_MEM_PHYS,
+				CONFIG_SYS_PCIE1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_IO_BUS,
+				CONFIG_SYS_PCIE1_IO_PHYS,
+				CONFIG_SYS_PCIE1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr,
+					(int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		printf ("PCIE on bus %02x - %02x\n",
+				hose->first_busno,hose->last_busno);
+
+		first_free_busno=hose->last_busno+1;
+
+	} else {
+		printf ("    PCIE: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+}
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
+#endif
+}
+#endif
diff --git a/board/freescale/mpc8569mds/tlb.c b/board/freescale/mpc8569mds/tlb.c
new file mode 100644
index 0000000..d3b251e
--- /dev/null
+++ b/board/freescale/mpc8569mds/tlb.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 Initializations */
+	/*
+	 * TLBe 0:	16M	Non-cacheable, guarded
+	 * 0xff000000	16M	FLASH (upper half)
+	 * Out of reset this entry is only 4K.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000,
+		      CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_16M, 1),
+
+	/*
+	 * TLBe 1:	16M	Non-cacheable, guarded
+	 * 0xfe000000	16M	FLASH (lower half)
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/*
+	 * TLBe 2:	256M	Non-cacheable, guarded
+	 * 0xa00000000	256M	PCIe MEM (lower half)
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLBe 3:	256M	Non-cacheable, guarded
+	 * 0xb00000000	256M	PCIe MEM (higher half)
+	 */
+	SET_TLB_ENTRY(1, (CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000),
+		      (CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000),
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_256M, 1),
+
+	/*
+	 * TLBe 4:	64M	Non-cacheable, guarded
+	 * 0xe000_0000	1M	CCSRBAR
+	 * 0xe280_0000	8M	PCIe IO
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLBe 5:	256K	Non-cacheable, guarded
+	 * 0xf8000000	32K BCSR
+	 * 0xf8008000	32K PIB (CS4)
+	 * 0xf8010000	32K PIB (CS5)
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256K, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8569mds/u-boot.lds b/board/freescale/mpc8569mds/u-boot.lds
new file mode 100644
index 0000000..0b2ea75
--- /dev/null
+++ b/board/freescale/mpc8569mds/u-boot.lds
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   } :text
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.eh_frame)
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  } :text
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  } :bss
+
+  . = ALIGN(4);
+  _end = . ;
+  PROVIDE (end = .);
+}