binman: Add support for ATF FIP
This format is used in firmware binaries so we may as well supported it.
With this patch binman supports creating, listing and updating FIPs, as
well as extracting files from one, provided that an FDTMAP is also present
somewhere in the image.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst
index d5aa3b0..c47f7df 100644
--- a/tools/binman/entries.rst
+++ b/tools/binman/entries.rst
@@ -25,6 +25,160 @@
+Entry: atf-fip: ARM Trusted Firmware's Firmware Image Package (FIP)
+-------------------------------------------------------------------
+
+A FIP_ provides a way to group binaries in a firmware image, used by ARM's
+Trusted Firmware A (TF-A) code. It is a simple format consisting of a
+table of contents with information about the type, offset and size of the
+binaries in the FIP. It is quite similar to FMAP, with the major difference
+that it uses UUIDs to indicate the type of each entry.
+
+Note: It is recommended to always add an fdtmap to every image, as well as
+any FIPs so that binman and other tools can access the entire image
+correctly.
+
+The UUIDs correspond to useful names in `fiptool`, provided by ATF to
+operate on FIPs. Binman uses these names to make it easier to understand
+what is going on, although it is possible to provide a UUID if needed.
+
+The contents of the FIP are defined by subnodes of the atf-fip entry, e.g.::
+
+ atf-fip {
+ soc-fw {
+ filename = "bl31.bin";
+ };
+
+ scp-fwu-cfg {
+ filename = "bl2u.bin";
+ };
+
+ u-boot {
+ fip-type = "nt-fw";
+ };
+ };
+
+This describes a FIP with three entries: soc-fw, scp-fwu-cfg and nt-fw.
+You can use normal (non-external) binaries like U-Boot simply by adding a
+FIP type, with the `fip-type` property, as above.
+
+Since FIP exists to bring blobs together, Binman assumes that all FIP
+entries are external binaries. If a binary may not exist, you can use the
+`--allow-missing` flag to Binman, in which case the image is still created,
+even though it will not actually work.
+
+The size of the FIP depends on the size of the binaries. There is currently
+no way to specify a fixed size. If the `atf-fip` node has a `size` entry,
+this affects the space taken up by the `atf-fip` entry, but the FIP itself
+does not expand to use that space.
+
+Some other FIP features are available with Binman. The header and the
+entries have 64-bit flag works. The flag flags do not seem to be defined
+anywhere, but you can use `fip-hdr-flags` and fip-flags` to set the values
+of the header and entries respectively.
+
+FIP entries can be aligned to a particular power-of-two boundary. Use
+fip-align for this.
+
+Binman only understands the entry types that are included in its
+implementation. It is possible to specify a 16-byte UUID instead, using the
+fip-uuid property. In this case Binman doesn't know what its type is, so
+just uses the UUID. See the `u-boot` node in this example::
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ fip-align = <16>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x456>;
+ filename = "bl31.bin";
+ };
+
+ scp-fwu-cfg {
+ filename = "bl2u.bin";
+ };
+
+ u-boot {
+ fip-uuid = [fc 65 13 92 4a 5b 11 ec
+ 94 35 ff 2d 1c fc 79 9c];
+ };
+ };
+ fdtmap {
+ };
+ };
+
+Binman allows reading and updating FIP entries after the image is created,
+provided that an FDPMAP is present too. Updates which change the size of a
+FIP entry will cause it to be expanded or contracted as needed.
+
+Properties for top-level atf-fip node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+fip-hdr-flags (64 bits)
+ Sets the flags for the FIP header.
+
+Properties for subnodes
+~~~~~~~~~~~~~~~~~~~~~~~
+
+fip-type (str)
+ FIP type to use for this entry. This is needed if the entry
+ name is not a valid type. Value types are defined in `fip_util.py`.
+ The FIP type defines the UUID that is used (they map 1:1).
+
+fip-uuid (16 bytes)
+ If there is no FIP-type name defined, or it is not supported by Binman,
+ this property sets the UUID. It should be a 16-byte value, following the
+ hex digits of the UUID.
+
+fip-flags (64 bits)
+ Set the flags for a FIP entry. Use in one of the subnodes of the
+ 7atf-fip entry.
+
+fip-align
+ Set the alignment for a FIP entry, FIP entries can be aligned to a
+ particular power-of-two boundary. The default is 1.
+
+Adding new FIP-entry types
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When new FIP entries are defined by TF-A they appear in the
+`TF-A source tree`_. You can use `fip_util.py` to update Binman to support
+new types, then `send a patch`_ to the U-Boot mailing list. There are two
+source files that the tool examples:
+
+- `include/tools_share/firmware_image_package.h` has the UUIDs
+- `tools/fiptool/tbbr_config.c` has the name and descripion for each UUID
+
+To run the tool::
+
+ $ tools/binman/fip_util.py -s /path/to/arm-trusted-firmware
+ Warning: UUID 'UUID_NON_TRUSTED_WORLD_KEY_CERT' is not mentioned in tbbr_config.c file
+ Existing code in 'tools/binman/fip_util.py' is up-to-date
+
+If it shows there is an update, it writes a new version of `fip_util.py`
+to `fip_util.py.out`. You can change the output file using the `-i` flag.
+If you have a problem, use `-D` to enable traceback debugging.
+
+FIP commentary
+~~~~~~~~~~~~~~
+
+As a side effect of use of UUIDs, FIP does not support multiple
+entries of the same type, such as might be used to store fonts or graphics
+icons, for example. For verified boot it could be used for each part of the
+image (e.g. separate FIPs for A and B) but cannot describe the whole
+firmware image. As with FMAP there is no hierarchy defined, although FMAP
+works around this by having 'section' areas which encompass others. A
+similar workaround would be possible with FIP but is not currently defined.
+
+It is recommended to always add an fdtmap to every image, as well as any
+FIPs so that binman and other tools can access the entire image correctly.
+
+.. _FIP: https://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.html#firmware-image-package-fip
+.. _`TF-A source tree`: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+.. _`send a patch`: https://www.denx.de/wiki/U-Boot/Patches
+
+
+
Entry: blob: Arbitrary binary blob
----------------------------------
diff --git a/tools/binman/etype/atf_fip.py b/tools/binman/etype/atf_fip.py
new file mode 100644
index 0000000..07e6c64
--- /dev/null
+++ b/tools/binman/etype/atf_fip.py
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright 2019 Google LLC
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for the ARM Trusted Firmware's Firmware Image Package (FIP)
+# format
+
+from collections import OrderedDict
+
+from binman.entry import Entry
+from binman.etype.section import Entry_section
+from binman.fip_util import FIP_TYPES, FipReader, FipWriter, UUID_LEN
+from dtoc import fdt_util
+from patman import tools
+
+class Entry_atf_fip(Entry_section):
+ """ARM Trusted Firmware's Firmware Image Package (FIP)
+
+ A FIP_ provides a way to group binaries in a firmware image, used by ARM's
+ Trusted Firmware A (TF-A) code. It is a simple format consisting of a
+ table of contents with information about the type, offset and size of the
+ binaries in the FIP. It is quite similar to FMAP, with the major difference
+ that it uses UUIDs to indicate the type of each entry.
+
+ Note: It is recommended to always add an fdtmap to every image, as well as
+ any FIPs so that binman and other tools can access the entire image
+ correctly.
+
+ The UUIDs correspond to useful names in `fiptool`, provided by ATF to
+ operate on FIPs. Binman uses these names to make it easier to understand
+ what is going on, although it is possible to provide a UUID if needed.
+
+ The contents of the FIP are defined by subnodes of the atf-fip entry, e.g.::
+
+ atf-fip {
+ soc-fw {
+ filename = "bl31.bin";
+ };
+
+ scp-fwu-cfg {
+ filename = "bl2u.bin";
+ };
+
+ u-boot {
+ fip-type = "nt-fw";
+ };
+ };
+
+ This describes a FIP with three entries: soc-fw, scp-fwu-cfg and nt-fw.
+ You can use normal (non-external) binaries like U-Boot simply by adding a
+ FIP type, with the `fip-type` property, as above.
+
+ Since FIP exists to bring blobs together, Binman assumes that all FIP
+ entries are external binaries. If a binary may not exist, you can use the
+ `--allow-missing` flag to Binman, in which case the image is still created,
+ even though it will not actually work.
+
+ The size of the FIP depends on the size of the binaries. There is currently
+ no way to specify a fixed size. If the `atf-fip` node has a `size` entry,
+ this affects the space taken up by the `atf-fip` entry, but the FIP itself
+ does not expand to use that space.
+
+ Some other FIP features are available with Binman. The header and the
+ entries have 64-bit flag works. The flag flags do not seem to be defined
+ anywhere, but you can use `fip-hdr-flags` and fip-flags` to set the values
+ of the header and entries respectively.
+
+ FIP entries can be aligned to a particular power-of-two boundary. Use
+ fip-align for this.
+
+ Binman only understands the entry types that are included in its
+ implementation. It is possible to specify a 16-byte UUID instead, using the
+ fip-uuid property. In this case Binman doesn't know what its type is, so
+ just uses the UUID. See the `u-boot` node in this example::
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ fip-align = <16>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x456>;
+ filename = "bl31.bin";
+ };
+
+ scp-fwu-cfg {
+ filename = "bl2u.bin";
+ };
+
+ u-boot {
+ fip-uuid = [fc 65 13 92 4a 5b 11 ec
+ 94 35 ff 2d 1c fc 79 9c];
+ };
+ };
+ fdtmap {
+ };
+ };
+
+ Binman allows reading and updating FIP entries after the image is created,
+ provided that an FDPMAP is present too. Updates which change the size of a
+ FIP entry will cause it to be expanded or contracted as needed.
+
+ Properties for top-level atf-fip node
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ fip-hdr-flags (64 bits)
+ Sets the flags for the FIP header.
+
+ Properties for subnodes
+ ~~~~~~~~~~~~~~~~~~~~~~~
+
+ fip-type (str)
+ FIP type to use for this entry. This is needed if the entry
+ name is not a valid type. Value types are defined in `fip_util.py`.
+ The FIP type defines the UUID that is used (they map 1:1).
+
+ fip-uuid (16 bytes)
+ If there is no FIP-type name defined, or it is not supported by Binman,
+ this property sets the UUID. It should be a 16-byte value, following the
+ hex digits of the UUID.
+
+ fip-flags (64 bits)
+ Set the flags for a FIP entry. Use in one of the subnodes of the
+ 7atf-fip entry.
+
+ fip-align
+ Set the alignment for a FIP entry, FIP entries can be aligned to a
+ particular power-of-two boundary. The default is 1.
+
+ Adding new FIP-entry types
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ When new FIP entries are defined by TF-A they appear in the
+ `TF-A source tree`_. You can use `fip_util.py` to update Binman to support
+ new types, then `send a patch`_ to the U-Boot mailing list. There are two
+ source files that the tool examples:
+
+ - `include/tools_share/firmware_image_package.h` has the UUIDs
+ - `tools/fiptool/tbbr_config.c` has the name and descripion for each UUID
+
+ To run the tool::
+
+ $ tools/binman/fip_util.py -s /path/to/arm-trusted-firmware
+ Warning: UUID 'UUID_NON_TRUSTED_WORLD_KEY_CERT' is not mentioned in tbbr_config.c file
+ Existing code in 'tools/binman/fip_util.py' is up-to-date
+
+ If it shows there is an update, it writes a new version of `fip_util.py`
+ to `fip_util.py.out`. You can change the output file using the `-i` flag.
+ If you have a problem, use `-D` to enable traceback debugging.
+
+ FIP commentary
+ ~~~~~~~~~~~~~~
+
+ As a side effect of use of UUIDs, FIP does not support multiple
+ entries of the same type, such as might be used to store fonts or graphics
+ icons, for example. For verified boot it could be used for each part of the
+ image (e.g. separate FIPs for A and B) but cannot describe the whole
+ firmware image. As with FMAP there is no hierarchy defined, although FMAP
+ works around this by having 'section' areas which encompass others. A
+ similar workaround would be possible with FIP but is not currently defined.
+
+ It is recommended to always add an fdtmap to every image, as well as any
+ FIPs so that binman and other tools can access the entire image correctly.
+
+ .. _FIP: https://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.html#firmware-image-package-fip
+ .. _`TF-A source tree`: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+ .. _`send a patch`: https://www.denx.de/wiki/U-Boot/Patches
+ """
+ def __init__(self, section, etype, node):
+ # Put this here to allow entry-docs and help to work without libfdt
+ global state
+ from binman import state
+
+ super().__init__(section, etype, node)
+ self.align_default = None
+ self._entries = OrderedDict()
+ self.reader = None
+
+ def ReadNode(self):
+ """Read properties from the atf-fip node"""
+ super().ReadNode()
+ self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0)
+ self._fip_flags = fdt_util.GetInt64(self._node, 'fip-hdr-flags', 0)
+ self._fip_align = fdt_util.GetInt(self._node, 'fip-align', 1)
+ if tools.NotPowerOfTwo(self._fip_align):
+ raise ValueError("Node '%s': FIP alignment %s must be a power of two" %
+ (self._node.path, self._fip_align))
+ self.ReadEntries()
+
+ def ReadEntries(self):
+ """Read the subnodes to find out what should go in this FIP"""
+ for node in self._node.subnodes:
+ fip_type = None
+ etype = None
+ if node.name in FIP_TYPES:
+ fip_type = node.name
+ etype = 'blob-ext'
+
+ entry = Entry.Create(self, node, etype)
+ entry._fip_uuid = fdt_util.GetBytes(node, 'fip-uuid', UUID_LEN)
+ if not fip_type and not entry._fip_uuid:
+ fip_type = fdt_util.GetString(node, 'fip-type')
+ if not fip_type:
+ self.Raise("Must provide a fip-type (node name '%s' is not a known FIP type)" %
+ node.name)
+
+ entry._fip_type = fip_type
+ entry._fip_flags = fdt_util.GetInt64(node, 'fip-flags', 0)
+ entry.ReadNode()
+ entry._fip_name = node.name
+ self._entries[entry._fip_name] = entry
+
+ def BuildSectionData(self, required):
+ """Override this function to create a custom format for the entries
+
+ Arguments:
+ required (bool): True if the data must be valid, False if it may
+ be missing (entry.GetData() returns None
+
+ Returns:
+ bytes: Data obtained, or None if None
+ """
+ fip = FipWriter(self._fip_flags, self._fip_align)
+ for entry in self._entries.values():
+ # First get the input data and put it in an entry. If not available,
+ # try later.
+ entry_data = entry.GetData(required)
+ if not required and entry_data is None:
+ return None
+ fent = fip.add_entry(entry._fip_type or entry._fip_uuid, entry_data,
+ entry._fip_flags)
+ if fent:
+ entry._fip_entry = fent
+ data = fip.get_data()
+ return data
+
+ def SetImagePos(self, image_pos):
+ """Override this function to set all the entry properties from FIP
+
+ We can only do this once image_pos is known
+
+ Args:
+ image_pos: Position of this entry in the image
+ """
+ super().SetImagePos(image_pos)
+
+ # Now update the entries with info from the FIP entries
+ for entry in self._entries.values():
+ fent = entry._fip_entry
+ entry.size = fent.size
+ entry.offset = fent.offset
+ entry.image_pos = self.image_pos + entry.offset
+
+ def ReadChildData(self, child, decomp=True, alt_format=None):
+ if not self.reader:
+ self.fip_data = super().ReadData(True)
+ self.reader = FipReader(self.fip_data)
+ reader = self.reader
+
+ # It is tricky to obtain the data from a FIP entry since it is indexed
+ # by its UUID.
+ fent = reader.get_entry(child._fip_type or child._fip_uuid)
+ return fent.data
+
+ # Note:
+ # It is also possible to extract it using the offsets directly, but this
+ # seems less FIP_friendly:
+ # return self.fip_data[child.offset:child.offset + child.size]
+
+ def WriteChildData(self, child):
+ # Recreate the data structure, leaving the data for this child alone,
+ # so that child.data is used to pack into the FIP.
+ self.ObtainContents(skip_entry=child)
+ return True
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index f5ceb9f..2f3ec69 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -23,6 +23,7 @@
from binman import control
from binman import elf
from binman import elf_test
+from binman import fip_util
from binman import fmap_util
from binman import state
from dtoc import fdt
@@ -76,6 +77,7 @@
FSP_S_DATA = b'fsp_s'
FSP_T_DATA = b'fsp_t'
ATF_BL31_DATA = b'bl31'
+ATF_BL2U_DATA = b'bl2u'
OPENSBI_DATA = b'opensbi'
SCP_DATA = b'scp'
TEST_FDT1_DATA = b'fdt1'
@@ -179,6 +181,7 @@
TestFunctional._MakeInputFile('compress', COMPRESS_DATA)
TestFunctional._MakeInputFile('compress_big', COMPRESS_DATA_BIG)
TestFunctional._MakeInputFile('bl31.bin', ATF_BL31_DATA)
+ TestFunctional._MakeInputFile('bl2u.bin', ATF_BL2U_DATA)
TestFunctional._MakeInputFile('fw_dynamic.bin', OPENSBI_DATA)
TestFunctional._MakeInputFile('scp.bin', SCP_DATA)
@@ -4735,6 +4738,220 @@
err = stderr.getvalue()
self.assertRegex(err, "Image 'main-section'.*missing.*: blob-ext")
+ def testFip(self):
+ """Basic test of generation of an ARM Firmware Image Package (FIP)"""
+ data = self._DoReadFile('203_fip.dts')
+ hdr, fents = fip_util.decode_fip(data)
+ self.assertEqual(fip_util.HEADER_MAGIC, hdr.name)
+ self.assertEqual(fip_util.HEADER_SERIAL, hdr.serial)
+ self.assertEqual(0x123, hdr.flags)
+
+ self.assertEqual(2, len(fents))
+
+ fent = fents[0]
+ self.assertEqual(
+ bytes([0x47, 0xd4, 0x08, 0x6d, 0x4c, 0xfe, 0x98, 0x46,
+ 0x9b, 0x95, 0x29, 0x50, 0xcb, 0xbd, 0x5a, 0x0]), fent.uuid)
+ self.assertEqual('soc-fw', fent.fip_type)
+ self.assertEqual(0x88, fent.offset)
+ self.assertEqual(len(ATF_BL31_DATA), fent.size)
+ self.assertEqual(0x123456789abcdef, fent.flags)
+ self.assertEqual(ATF_BL31_DATA, fent.data)
+ self.assertEqual(True, fent.valid)
+
+ fent = fents[1]
+ self.assertEqual(
+ bytes([0x65, 0x92, 0x27, 0x03, 0x2f, 0x74, 0xe6, 0x44,
+ 0x8d, 0xff, 0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10]), fent.uuid)
+ self.assertEqual('scp-fwu-cfg', fent.fip_type)
+ self.assertEqual(0x8c, fent.offset)
+ self.assertEqual(len(ATF_BL31_DATA), fent.size)
+ self.assertEqual(0, fent.flags)
+ self.assertEqual(ATF_BL2U_DATA, fent.data)
+ self.assertEqual(True, fent.valid)
+
+ def testFipOther(self):
+ """Basic FIP with something that isn't a external blob"""
+ data = self._DoReadFile('204_fip_other.dts')
+ hdr, fents = fip_util.decode_fip(data)
+
+ self.assertEqual(2, len(fents))
+ fent = fents[1]
+ self.assertEqual('rot-cert', fent.fip_type)
+ self.assertEqual(b'aa', fent.data)
+
+ def testFipOther(self):
+ """Basic FIP with something that isn't a external blob"""
+ data = self._DoReadFile('204_fip_other.dts')
+ hdr, fents = fip_util.decode_fip(data)
+
+ self.assertEqual(2, len(fents))
+ fent = fents[1]
+ self.assertEqual('rot-cert', fent.fip_type)
+ self.assertEqual(b'aa', fent.data)
+
+ def testFipNoType(self):
+ """FIP with an entry of an unknown type"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('205_fip_no_type.dts')
+ self.assertIn("Must provide a fip-type (node name 'u-boot' is not a known FIP type)",
+ str(e.exception))
+
+ def testFipUuid(self):
+ """Basic FIP with a manual uuid"""
+ data = self._DoReadFile('206_fip_uuid.dts')
+ hdr, fents = fip_util.decode_fip(data)
+
+ self.assertEqual(2, len(fents))
+ fent = fents[1]
+ self.assertEqual(None, fent.fip_type)
+ self.assertEqual(
+ bytes([0xfc, 0x65, 0x13, 0x92, 0x4a, 0x5b, 0x11, 0xec,
+ 0x94, 0x35, 0xff, 0x2d, 0x1c, 0xfc, 0x79, 0x9c]),
+ fent.uuid)
+ self.assertEqual(U_BOOT_DATA, fent.data)
+
+ def testFipLs(self):
+ """Test listing a FIP"""
+ data = self._DoReadFileRealDtb('207_fip_ls.dts')
+ hdr, fents = fip_util.decode_fip(data)
+
+ try:
+ tmpdir, updated_fname = self._SetupImageInTmpdir()
+ with test_util.capture_sys_output() as (stdout, stderr):
+ self._DoBinman('ls', '-i', updated_fname)
+ finally:
+ shutil.rmtree(tmpdir)
+ lines = stdout.getvalue().splitlines()
+ expected = [
+'Name Image-pos Size Entry-type Offset Uncomp-size',
+'----------------------------------------------------------------',
+'main-section 0 2d3 section 0',
+' atf-fip 0 90 atf-fip 0',
+' soc-fw 88 4 blob-ext 88',
+' u-boot 8c 4 u-boot 8c',
+' fdtmap 90 243 fdtmap 90',
+]
+ self.assertEqual(expected, lines)
+
+ image = control.images['image']
+ entries = image.GetEntries()
+ fdtmap = entries['fdtmap']
+
+ fdtmap_data = data[fdtmap.image_pos:fdtmap.image_pos + fdtmap.size]
+ magic = fdtmap_data[:8]
+ self.assertEqual(b'_FDTMAP_', magic)
+ self.assertEqual(tools.GetBytes(0, 8), fdtmap_data[8:16])
+
+ fdt_data = fdtmap_data[16:]
+ dtb = fdt.Fdt.FromData(fdt_data)
+ dtb.Scan()
+ props = self._GetPropTree(dtb, BASE_DTB_PROPS, prefix='/')
+ self.assertEqual({
+ 'atf-fip/soc-fw:image-pos': 136,
+ 'atf-fip/soc-fw:offset': 136,
+ 'atf-fip/soc-fw:size': 4,
+ 'atf-fip/u-boot:image-pos': 140,
+ 'atf-fip/u-boot:offset': 140,
+ 'atf-fip/u-boot:size': 4,
+ 'atf-fip:image-pos': 0,
+ 'atf-fip:offset': 0,
+ 'atf-fip:size': 144,
+ 'image-pos': 0,
+ 'offset': 0,
+ 'fdtmap:image-pos': fdtmap.image_pos,
+ 'fdtmap:offset': fdtmap.offset,
+ 'fdtmap:size': len(fdtmap_data),
+ 'size': len(data),
+ }, props)
+
+ def testFipExtractOneEntry(self):
+ """Test extracting a single entry fron an FIP"""
+ self._DoReadFileRealDtb('207_fip_ls.dts')
+ image_fname = tools.GetOutputFilename('image.bin')
+ fname = os.path.join(self._indir, 'output.extact')
+ control.ExtractEntries(image_fname, fname, None, ['atf-fip/u-boot'])
+ data = tools.ReadFile(fname)
+ self.assertEqual(U_BOOT_DATA, data)
+
+ def testFipReplace(self):
+ """Test replacing a single file in a FIP"""
+ expected = U_BOOT_DATA + tools.GetBytes(0x78, 50)
+ data = self._DoReadFileRealDtb('208_fip_replace.dts')
+ updated_fname = tools.GetOutputFilename('image-updated.bin')
+ tools.WriteFile(updated_fname, data)
+ entry_name = 'atf-fip/u-boot'
+ control.WriteEntry(updated_fname, entry_name, expected,
+ allow_resize=True)
+ actual = control.ReadEntry(updated_fname, entry_name)
+ self.assertEqual(expected, actual)
+
+ new_data = tools.ReadFile(updated_fname)
+ hdr, fents = fip_util.decode_fip(new_data)
+
+ self.assertEqual(2, len(fents))
+
+ # Check that the FIP entry is updated
+ fent = fents[1]
+ self.assertEqual(0x8c, fent.offset)
+ self.assertEqual(len(expected), fent.size)
+ self.assertEqual(0, fent.flags)
+ self.assertEqual(expected, fent.data)
+ self.assertEqual(True, fent.valid)
+
+ def testFipMissing(self):
+ with test_util.capture_sys_output() as (stdout, stderr):
+ self._DoTestFile('209_fip_missing.dts', allow_missing=True)
+ err = stderr.getvalue()
+ self.assertRegex(err, "Image 'main-section'.*missing.*: rmm-fw")
+
+ def testFipSize(self):
+ """Test a FIP with a size property"""
+ data = self._DoReadFile('210_fip_size.dts')
+ self.assertEqual(0x100 + len(U_BOOT_DATA), len(data))
+ hdr, fents = fip_util.decode_fip(data)
+ self.assertEqual(fip_util.HEADER_MAGIC, hdr.name)
+ self.assertEqual(fip_util.HEADER_SERIAL, hdr.serial)
+
+ self.assertEqual(1, len(fents))
+
+ fent = fents[0]
+ self.assertEqual('soc-fw', fent.fip_type)
+ self.assertEqual(0x60, fent.offset)
+ self.assertEqual(len(ATF_BL31_DATA), fent.size)
+ self.assertEqual(ATF_BL31_DATA, fent.data)
+ self.assertEqual(True, fent.valid)
+
+ rest = data[0x60 + len(ATF_BL31_DATA):0x100]
+ self.assertEqual(tools.GetBytes(0xff, len(rest)), rest)
+
+ def testFipBadAlign(self):
+ """Test that an invalid alignment value in a FIP is detected"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('211_fip_bad_align.dts')
+ self.assertIn(
+ "Node \'/binman/atf-fip\': FIP alignment 31 must be a power of two",
+ str(e.exception))
+
+ def testFipCollection(self):
+ """Test using a FIP in a collection"""
+ data = self._DoReadFile('212_fip_collection.dts')
+ entry1 = control.images['image'].GetEntries()['collection']
+ data1 = data[:entry1.size]
+ hdr1, fents2 = fip_util.decode_fip(data1)
+
+ entry2 = control.images['image'].GetEntries()['atf-fip']
+ data2 = data[entry2.offset:entry2.offset + entry2.size]
+ hdr1, fents2 = fip_util.decode_fip(data2)
+
+ # The 'collection' entry should have U-Boot included at the end
+ self.assertEqual(entry1.size - len(U_BOOT_DATA), entry2.size)
+ self.assertEqual(data1, data2 + U_BOOT_DATA)
+ self.assertEqual(U_BOOT_DATA, data1[-4:])
+
+ # There should be a U-Boot after the final FIP
+ self.assertEqual(U_BOOT_DATA, data[-4:])
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/203_fip.dts b/tools/binman/test/203_fip.dts
new file mode 100644
index 0000000..0897337
--- /dev/null
+++ b/tools/binman/test/203_fip.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x123456789abcdef>;
+ filename = "bl31.bin";
+ };
+
+ scp-fwu-cfg {
+ filename = "bl2u.bin";
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/204_fip_other.dts b/tools/binman/test/204_fip_other.dts
new file mode 100644
index 0000000..6503941
--- /dev/null
+++ b/tools/binman/test/204_fip_other.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x123456789abcdef>;
+ filename = "bl31.bin";
+ };
+
+ _testing {
+ fip-type = "rot-cert";
+ return-contents-later;
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/205_fip_no_type.dts b/tools/binman/test/205_fip_no_type.dts
new file mode 100644
index 0000000..23c8c3b
--- /dev/null
+++ b/tools/binman/test/205_fip_no_type.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ u-boot {
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/206_fip_uuid.dts b/tools/binman/test/206_fip_uuid.dts
new file mode 100644
index 0000000..c9bd44f
--- /dev/null
+++ b/tools/binman/test/206_fip_uuid.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x123456789abcdef>;
+ filename = "bl31.bin";
+ };
+
+ u-boot {
+ fip-uuid = [fc 65 13 92 4a 5b 11 ec
+ 94 35 ff 2d 1c fc 79 9c];
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/207_fip_ls.dts b/tools/binman/test/207_fip_ls.dts
new file mode 100644
index 0000000..630fca1
--- /dev/null
+++ b/tools/binman/test/207_fip_ls.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x123456789abcdef>;
+ filename = "bl31.bin";
+ };
+
+ u-boot {
+ fip-uuid = [fc 65 13 92 4a 5b 11 ec
+ 94 35 ff 2d 1c fc 79 9c];
+ };
+ };
+
+ fdtmap {
+ };
+ };
+};
diff --git a/tools/binman/test/208_fip_replace.dts b/tools/binman/test/208_fip_replace.dts
new file mode 100644
index 0000000..432c124
--- /dev/null
+++ b/tools/binman/test/208_fip_replace.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ allow-repack;
+ atf-fip {
+ fip-hdr-flags = /bits/ 64 <0x123>;
+ soc-fw {
+ fip-flags = /bits/ 64 <0x123456789abcdef>;
+ filename = "bl31.bin";
+ };
+
+ u-boot {
+ fip-uuid = [fc 65 13 92 4a 5b 11 ec
+ 94 35 ff 2d 1c fc 79 9c];
+ };
+
+ };
+
+ u-boot {
+ };
+
+ u-boot-dtb {
+ };
+
+ fdtmap {
+ };
+ };
+};
diff --git a/tools/binman/test/209_fip_missing.dts b/tools/binman/test/209_fip_missing.dts
new file mode 100644
index 0000000..43bb600
--- /dev/null
+++ b/tools/binman/test/209_fip_missing.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ soc-fw {
+ filename = "bl31.bin";
+ };
+
+ rmm-fw {
+ filename = "rmm.bin";
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/210_fip_size.dts b/tools/binman/test/210_fip_size.dts
new file mode 100644
index 0000000..9dfee79
--- /dev/null
+++ b/tools/binman/test/210_fip_size.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ size = <0x100>;
+ pad-byte = <0xff>;
+ soc-fw {
+ filename = "bl31.bin";
+ };
+ };
+ u-boot {
+ };
+ };
+};
diff --git a/tools/binman/test/211_fip_bad_align.dts b/tools/binman/test/211_fip_bad_align.dts
new file mode 100644
index 0000000..a090149
--- /dev/null
+++ b/tools/binman/test/211_fip_bad_align.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ atf-fip {
+ fip-align = <31>;
+ size = <0x100>;
+ pad-byte = <0xff>;
+ soc-fw {
+ filename = "bl31.bin";
+ };
+ };
+ };
+};
diff --git a/tools/binman/test/212_fip_collection.dts b/tools/binman/test/212_fip_collection.dts
new file mode 100644
index 0000000..332c023
--- /dev/null
+++ b/tools/binman/test/212_fip_collection.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ collection {
+ content = <&fip &u_boot>;
+ };
+ fip: atf-fip {
+ soc-fw {
+ filename = "bl31.bin";
+ };
+
+ scp-fwu-cfg {
+ filename = "bl2u.bin";
+ };
+ };
+ u_boot: u-boot {
+ };
+ };
+};