timer: Sort Kconfig driver entries
This is currently out of order. Sort it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index d012cf7..d0cfc35 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -40,6 +40,12 @@
use an early timer. These functions must be supported by your timer
driver: timer_early_get_count() and timer_early_get_rate().
+config AG101P_TIMER
+ bool "AG101P timer support"
+ depends on TIMER && NDS32
+ help
+ Select this to enable a timer for AG01P devices.
+
config ALTERA_TIMER
bool "Altera timer support"
depends on TIMER
@@ -47,6 +53,34 @@
Select this to enable a timer for Altera devices. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
+config ARC_TIMER
+ bool "ARC timer support"
+ depends on TIMER && ARC && CLK
+ help
+ Select this to enable built-in ARC timers.
+ ARC cores may have up to 2 built-in timers: timer0 and timer1,
+ usually at least one of them exists. Either of them is supported
+ in U-Boot.
+
+config AST_TIMER
+ bool "Aspeed ast2400/ast2500 timer support"
+ depends on TIMER
+ default y if ARCH_ASPEED
+ help
+ Select this to enable timer for Aspeed ast2400/ast2500 devices.
+ This is a simple sys timer driver, it is compatible with lib/time.c,
+ but does not support any interrupts. Even though SoC has 8 hardware
+ counters, they are all treated as a single device by this driver.
+ This is mostly because they all share several registers which
+ makes it difficult to completely separate them.
+
+config ATCPIT100_TIMER
+ bool "ATCPIT100 timer support"
+ depends on TIMER
+ help
+ Select this to enable a ATCPIT100 timer which will be embedded
+ in AE3XX, AE250 boards.
+
config ATMEL_PIT_TIMER
bool "Atmel periodic interval timer support"
depends on TIMER
@@ -69,18 +103,12 @@
Enables support for the Designware APB Timer driver. This timer is
present on Altera SoCFPGA SoCs.
-config SANDBOX_TIMER
- bool "Sandbox timer support"
- depends on SANDBOX && TIMER
+config MPC83XX_TIMER
+ bool "MPC83xx timer support"
+ depends on TIMER
help
- Select this to enable an emulated timer for sandbox. It gets
- time from host os.
-
-config X86_TSC_TIMER
- bool "x86 Time-Stamp Counter (TSC) timer support"
- depends on TIMER && X86
- help
- Select this to enable Time-Stamp Counter (TSC) timer for x86.
+ Select this to enable support for the timer found on
+ devices based on the MPC83xx family of SoCs.
config X86_TSC_TIMER_EARLY_FREQ
int "x86 TSC timer frequency in MHz when used as the early timer"
@@ -98,17 +126,19 @@
help
Select this to enable an timer for Omap devices.
-config AST_TIMER
- bool "Aspeed ast2400/ast2500 timer support"
+config ROCKCHIP_TIMER
+ bool "Rockchip timer support"
depends on TIMER
- default y if ARCH_ASPEED
help
- Select this to enable timer for Aspeed ast2400/ast2500 devices.
- This is a simple sys timer driver, it is compatible with lib/time.c,
- but does not support any interrupts. Even though SoC has 8 hardware
- counters, they are all treated as a single device by this driver.
- This is mostly because they all share several registers which
- makes it difficult to completely separate them.
+ Select this to enable support for the timer found on
+ Rockchip devices.
+
+config SANDBOX_TIMER
+ bool "Sandbox timer support"
+ depends on SANDBOX && TIMER
+ help
+ Select this to enable an emulated timer for sandbox. It gets
+ time from host os.
config STI_TIMER
bool "STi timer support"
@@ -117,47 +147,17 @@
help
Select this to enable a timer for STi devices.
-config ARC_TIMER
- bool "ARC timer support"
- depends on TIMER && ARC && CLK
- help
- Select this to enable built-in ARC timers.
- ARC cores may have up to 2 built-in timers: timer0 and timer1,
- usually at least one of them exists. Either of them is supported
- in U-Boot.
-
-config AG101P_TIMER
- bool "AG101P timer support"
- depends on TIMER && NDS32
- help
- Select this to enable a timer for AG01P devices.
-
-config ATCPIT100_TIMER
- bool "ATCPIT100 timer support"
- depends on TIMER
- help
- Select this to enable a ATCPIT100 timer which will be embeded
- in AE3XX, AE250 boards.
-
-config ROCKCHIP_TIMER
- bool "Rockchip timer support"
- depends on TIMER
- help
- Select this to enable support for the timer found on
- Rockchip devices.
-
config STM32_TIMER
- bool "STM32 timer support"
+ bool "STM32 timer support"
depends on TIMER
help
Select this to enable support for the timer found on
STM32 devices.
-config MPC83XX_TIMER
- bool "MPC83xx timer support"
- depends on TIMER
+config X86_TSC_TIMER
+ bool "x86 Time-Stamp Counter (TSC) timer support"
+ depends on TIMER && X86
help
- Select this to enable support for the timer found on
- devices based on the MPC83xx family of SoCs.
+ Select this to enable Time-Stamp Counter (TSC) timer for x86.
endmenu