ARM: tegra: support running in non-secure mode
When the CPU is in non-secure (NS) mode (when running U-Boot under a
secure monitor), certain actions cannot be taken, since they would need
to write to secure-only registers. One example is configuring the ARM
architectural timer's CNTFRQ register.
We could support this in one of two ways:
1) Compile twice, once for secure mode (in which case anything goes) and
once for non-secure mode (in which case certain actions are disabled).
This complicates things, since everyone needs to keep track of
different U-Boot binaries for different situations.
2) Detect NS mode at run-time, and optionally skip any impossible actions.
This has the advantage of a single U-Boot binary working in all cases.
(2) is not possible on ARM in general, since there's no architectural way
to detect secure-vs-non-secure. However, there is a Tegra-specific way to
detect this.
This patches uses that feature to detect secure vs. NS mode on Tegra, and
uses that to:
* Skip the ARM arch timer initialization.
* Set/clear an environment variable so that boot scripts can take
different action depending on which mode the CPU is in. This might be
something like:
if CPU is secure:
load secure monitor code into RAM.
boot secure monitor.
secure monitor will restart (a new copy of) U-Boot in NS mode.
else:
execute normal boot process
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c
index 87511a3..0ebaf19 100644
--- a/arch/arm/mach-tegra/board.c
+++ b/arch/arm/mach-tegra/board.c
@@ -11,6 +11,7 @@
#include <asm/arch/funcmux.h>
#include <asm/arch/mc.h>
#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/ap.h>
#include <asm/arch-tegra/board.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/sys_proto.h>
@@ -28,6 +29,24 @@
UART_COUNT = 5,
};
+#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+#if !defined(CONFIG_TEGRA124)
+#error tegra_cpu_is_non_secure has only been validated on Tegra124
+#endif
+bool tegra_cpu_is_non_secure(void)
+{
+ /*
+ * This register reads 0xffffffff in non-secure mode. This register
+ * only implements bits 31:20, so the lower bits will always read 0 in
+ * secure mode. Thus, the lower bits are an indicator for secure vs.
+ * non-secure mode.
+ */
+ struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+ uint32_t mc_s_cfg0 = readl(&mc->mc_security_cfg0);
+ return (mc_s_cfg0 & 1) == 1;
+}
+#endif
+
/* Read the RAM size directly from the memory controller */
unsigned int query_sdram_size(void)
{