powerpc/p5040ds: add per pci endpoint liodn offset list
Add a new device tree property named "fsl,liodn-offset-list"
holding a list of per pci endpoint permitted liodn offsets.
This property is useful in virtualization scenarios
that implement per pci endpoint partitioning.
The final liodn of a partitioned pci endpoint is
calculated by the hardware, by adding these offsets
to pci controller's base liodn, stored in the
"fsl,liodn" property of its node.
The liodn offsets are interleaved to get better cache
utilization. As an example, given 3 pci controllers,
the following liodns are generated for the pci endpoints:
pci0: 193 256 259 262 265 268 271 274 277
pci1: 194 257 260 263 266 269 272 275 278
pci2: 195 258 261 264 267 270 273 276 279
Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index e97388c..2e53367 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -254,6 +254,56 @@
}
#endif
+#define CONFIG_SYS_MAX_PCI_EPS 8
+#define CONFIG_SYS_PCI_EP_LIODN_START 256
+
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+{
+ int off, pci_idx = 0, pci_cnt = 0, i, rc;
+ const uint32_t *base_liodn;
+ uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 };
+
+ /*
+ * Count the number of pci nodes.
+ * It's needed later when the interleaved liodn offsets are generated.
+ */
+ off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ pci_cnt++;
+ off = fdt_node_offset_by_compatible(fdt, off, compat);
+ }
+
+ for (off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ off != -FDT_ERR_NOTFOUND;
+ off = fdt_node_offset_by_compatible(fdt, off, compat)) {
+ base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc);
+ if (!base_liodn) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Could not get liodn of node %s: %s\n",
+ path, fdt_strerror(rc));
+ continue;
+ }
+ for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
+ liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+ i * pci_cnt + pci_idx - *base_liodn;
+ rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
+ liodn_offs, sizeof(liodn_offs));
+ if (rc) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Unable to set fsl,liodn-offset-list for "
+ "node %s: %s\n", path, fdt_strerror(rc));
+ continue;
+ }
+ pci_idx++;
+ }
+}
+
static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
{
int i;
@@ -303,4 +353,6 @@
#ifdef CONFIG_SYS_DPAA_RMAN
fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
#endif
+
+ fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
}