* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
* Patch by Andreas Mohr, 4 Sep 2003:
Fix a lot of spelling errors
diff --git a/drivers/sk98lin/h/skgeinit.h b/drivers/sk98lin/h/skgeinit.h
new file mode 100644
index 0000000..f9148d1
--- /dev/null
+++ b/drivers/sk98lin/h/skgeinit.h
@@ -0,0 +1,1113 @@
+/******************************************************************************
+ *
+ * Name: skgeinit.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.75 $
+ * Date: $Date: 2003/02/05 13:36:39 $
+ * Purpose: Structures and prototypes for the GE Init Module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgeinit.h,v $
+ * Revision 1.75 2003/02/05 13:36:39 rschmidt
+ * Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz
+ * Editorial changes
+ *
+ * Revision 1.74 2003/01/28 09:39:16 rschmidt
+ * Added entry GIYukonLite in s_GeInit structure
+ * Editorial changes
+ *
+ * Revision 1.73 2002/11/15 12:47:25 rschmidt
+ * Replaced error message SKERR_HWI_E024 for Cable Diagnostic with
+ * Rx queue error in SkGeStopPort().
+ *
+ * Revision 1.72 2002/11/12 17:08:35 rschmidt
+ * Added entries for Cable Diagnostic to Port structure
+ * Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure
+ * Added error message for Cable Diagnostic
+ * Added prototypes for SkGmCableDiagStatus()
+ * Editorial changes
+ *
+ * Revision 1.71 2002/10/21 11:26:10 mkarl
+ * Changed interface of SkGeInitAssignRamToQueues().
+ *
+ * Revision 1.70 2002/10/14 08:21:32 rschmidt
+ * Changed type of GICopperType, GIVauxAvail to SK_BOOL
+ * Added entry PRxOverCnt to Port structure
+ * Added entry GIYukon32Bit in s_GeInit structure
+ * Editorial changes
+ *
+ * Revision 1.69 2002/10/09 16:57:15 mkarl
+ * Added some constants and macros for SkGeInitAssignRamToQueues().
+ *
+ * Revision 1.68 2002/09/12 08:58:51 rwahl
+ * Retrieve counters needed for XMAC errata workarounds directly because
+ * PNMI returns corrected counter values (e.g. #10620).
+ *
+ * Revision 1.67 2002/08/16 14:40:30 rschmidt
+ * Added entries GIGenesis and GICopperType in s_GeInit structure
+ * Added prototypes for SkMacHashing()
+ * Editorial changes
+ *
+ * Revision 1.66 2002/08/12 13:27:21 rschmidt
+ * Added defines for Link speed capabilities
+ * Added entry PLinkSpeedCap to Port structure
+ * Added entry GIVauxAvail in s_GeInit structure
+ * Added prototypes for SkMacPromiscMode()
+ * Editorial changes
+ *
+ * Revision 1.65 2002/08/08 15:46:18 rschmidt
+ * Added define SK_PHY_ACC_TO for PHY access timeout
+ * Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark
+ * Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size
+ * Added entry PhyId1 to Port structure
+ *
+ * Revision 1.64 2002/07/23 16:02:56 rschmidt
+ * Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.)
+ * Added prototypes for: SkGePhyRead(), SkGePhyWrite()
+ *
+ * Revision 1.63 2002/07/18 08:17:38 rwahl
+ * Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx.
+ *
+ * Revision 1.62 2002/07/17 18:21:55 rwahl
+ * Added SK_LSPEED_INDETERMINATED define.
+ *
+ * Revision 1.61 2002/07/17 17:16:03 rwahl
+ * - MacType now member of GIni struct.
+ * - Struct alignment to 32bit.
+ * - Editorial change.
+ *
+ * Revision 1.60 2002/07/15 18:23:39 rwahl
+ * Added GeMacFunc to GE Init structure.
+ * Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(),
+ * SkXmMacStatistic(), SkGmMacStatistic(), SkXmResetCounter(),
+ * SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus().
+ * Added defines for current link speed state.
+ * Added ERRMSG defintions for MacUpdateStat() & MacStatistics().
+ *
+ * Revision 1.59 2002/07/15 15:40:22 rschmidt
+ * Added entry PLinkSpeedUsed to Port structure
+ * Editorial changes
+ *
+ * Revision 1.58 2002/06/10 09:36:30 rschmidt
+ * Editorial changes.
+ *
+ * Revision 1.57 2002/06/05 08:18:00 rschmidt
+ * Corrected alignment in Port Structure
+ * Added new prototypes for GMAC
+ * Editorial changes
+ *
+ * Revision 1.56 2002/04/25 11:38:12 rschmidt
+ * Added defines for Link speed values
+ * Added defines for Loopback parameters for MAC and PHY
+ * Removed entry PRxCmd from Port structure
+ * Added entry PLinkSpeed to Port structure
+ * Added entries GIChipId and GIChipRev to GE Init structure
+ * Removed entry GIAnyPortAct from GE Init structure
+ * Added prototypes for: SkMacInit(), SkMacInitPhy(),
+ * SkMacRxTxDisable(), SkMacSoftRst(), SkMacHardRst(), SkMacIrq(),
+ * SkMacIrqDisable(), SkMacFlushTxFifo(), SkMacFlushRxFifo(),
+ * SkMacAutoNegDone(), SkMacAutoNegLipaPhy(), SkMacSetRxTxEn(),
+ * SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite();
+ * Removed prototypes for static functions in SkXmac2.c
+ * Editorial changes
+ *
+ * Revision 1.55 2002/02/26 15:24:53 rwahl
+ * Fix: no link with manual configuration (#10673). The previous fix for
+ * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to
+ * misconfigured port. It should not occur for the other RLMT modes.
+ *
+ * Revision 1.54 2002/01/18 16:52:52 rwahl
+ * Editorial corrections.
+ *
+ * Revision 1.53 2001/11/20 09:19:58 rwahl
+ * Reworked bugfix #10639 (no dependency to RLMT mode).
+ *
+ * Revision 1.52 2001/10/26 07:52:23 afischer
+ * Port switching bug in `check local link` mode
+ *
+ * Revision 1.51 2001/02/09 12:26:38 cgoos
+ * Inserted #ifdef DIAG for half duplex workaround timer.
+ *
+ * Revision 1.50 2001/02/07 07:56:40 rassmann
+ * Corrected copyright.
+ *
+ * Revision 1.49 2001/01/31 15:32:18 gklug
+ * fix: problem with autosensing an SR8800 switch
+ * add: counter for autoneg timeouts
+ *
+ * Revision 1.48 2000/11/09 11:30:10 rassmann
+ * WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ * Revision 1.47 2000/10/18 12:22:40 cgoos
+ * Added workaround for half duplex hangup.
+ *
+ * Revision 1.46 2000/08/10 11:28:00 rassmann
+ * Editorial changes.
+ * Preserving 32-bit alignment in structs for the adapter context.
+ *
+ * Revision 1.45 1999/11/22 13:56:19 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.44 1999/10/26 07:34:15 malthoff
+ * The define SK_LNK_ON has been lost in v1.41.
+ *
+ * Revision 1.43 1999/10/06 09:30:16 cgoos
+ * Changed SK_XM_THR_JUMBO.
+ *
+ * Revision 1.42 1999/09/16 12:58:26 cgoos
+ * Changed SK_LED_STANDY macro to be independent of HW link sync.
+ *
+ * Revision 1.41 1999/07/30 06:56:14 malthoff
+ * Correct comment for SK_MS_STAT_UNSET.
+ *
+ * Revision 1.40 1999/05/27 13:38:46 cgoos
+ * Added SK_BMU_TX_WM.
+ * Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable.
+ * Changed XMAC Tx treshold to max. values.
+ *
+ * Revision 1.39 1999/05/20 14:35:26 malthoff
+ * Remove prototypes for SkGeLinkLED().
+ *
+ * Revision 1.38 1999/05/19 11:59:12 cgoos
+ * Added SK_MS_CAP_INDETERMINATED define.
+ *
+ * Revision 1.37 1999/05/19 07:32:33 cgoos
+ * Changes for 1000Base-T.
+ * LED-defines for HWAC_LINK_LED macro.
+ *
+ * Revision 1.36 1999/04/08 14:00:24 gklug
+ * add:Port struct field PLinkResCt
+ *
+ * Revision 1.35 1999/03/25 07:43:07 malthoff
+ * Add error string for SKERR_HWI_E018MSG.
+ *
+ * Revision 1.34 1999/03/12 16:25:57 malthoff
+ * Remove PPollRxD and PPollTxD.
+ * Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX.
+ *
+ * Revision 1.33 1999/03/12 13:34:41 malthoff
+ * Add Autonegotiation error codes.
+ * Change defines for parameter Mode in SkXmSetRxCmd().
+ * Replace __STDC__ by SK_KR_PROTO.
+ *
+ * Revision 1.32 1999/01/25 14:40:20 mhaveman
+ * Added new return states for the virtual management port if multiple
+ * ports are active but differently configured.
+ *
+ * Revision 1.31 1998/12/11 15:17:02 gklug
+ * add: Link partnet autoneg states : Unknown Manual and Auto-negotiation
+ *
+ * Revision 1.30 1998/12/07 12:17:04 gklug
+ * add: Link Partner auto-negotiation flag
+ *
+ * Revision 1.29 1998/12/01 10:54:42 gklug
+ * add: variables for XMAC Errata
+ *
+ * Revision 1.28 1998/12/01 10:14:15 gklug
+ * add: PIsave saves the Interrupt status word
+ *
+ * Revision 1.27 1998/11/26 15:24:52 mhaveman
+ * Added link status states SK_LMODE_STAT_AUTOHALF and
+ * SK_LMODE_STAT_AUTOFULL which are used by PNMI.
+ *
+ * Revision 1.26 1998/11/26 14:53:01 gklug
+ * add:autoNeg Timeout variable
+ *
+ * Revision 1.25 1998/11/26 08:58:50 gklug
+ * add: Link Mode configuration (AUTO Sense mode)
+ *
+ * Revision 1.24 1998/11/24 13:30:27 gklug
+ * add: PCheckPar to port struct
+ *
+ * Revision 1.23 1998/11/18 13:23:26 malthoff
+ * Add SK_PKT_TO_MAX.
+ *
+ * Revision 1.22 1998/11/18 13:19:54 gklug
+ * add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1
+ *
+ * Revision 1.21 1998/10/26 08:02:57 malthoff
+ * Add GIRamOffs.
+ *
+ * Revision 1.20 1998/10/19 07:28:37 malthoff
+ * Add prototype for SkGeInitRamIface().
+ *
+ * Revision 1.19 1998/10/14 14:47:48 malthoff
+ * SK_TIMER should not be defined for Diagnostics.
+ * Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG.
+ *
+ * Revision 1.18 1998/10/14 14:00:03 gklug
+ * add: timer to port struct for workaround of Errata #2
+ *
+ * Revision 1.17 1998/10/14 11:23:09 malthoff
+ * Add prototype for SkXmAutoNegDone().
+ * Fix SkXmSetRxCmd() prototype statement.
+ *
+ * Revision 1.16 1998/10/14 05:42:29 gklug
+ * add: HWLinkUp flag to Port struct
+ *
+ * Revision 1.15 1998/10/09 08:26:33 malthoff
+ * Rename SK_RB_ULPP_B to SK_RB_LLPP_B.
+ *
+ * Revision 1.14 1998/10/09 07:11:13 malthoff
+ * bug fix: SK_FACT_53 is 85 not 117.
+ * Rework time out init values.
+ * Add GIPortUsage and corresponding defines.
+ * Add some error log messages.
+ *
+ * Revision 1.13 1998/10/06 14:13:14 malthoff
+ * Add prototype for SkGeLoadLnkSyncCnt().
+ *
+ * Revision 1.12 1998/10/05 11:29:53 malthoff
+ * bug fix: A comment was not closed.
+ *
+ * Revision 1.11 1998/10/05 08:01:59 malthoff
+ * Add default Timeout- Threshold- and
+ * Watermark constants. Add QRam start and end
+ * variables. Also add vars to store the polling
+ * mode and receive command. Add new Error Log
+ * Messages and function prototypes.
+ *
+ * Revision 1.10 1998/09/28 13:34:48 malthoff
+ * Add mode bits for LED functions.
+ * Move Autoneg and Flow Ctrl bits from shgesirq.h
+ * Add the required Error Log Entries
+ * and Function Prototypes.
+ *
+ * Revision 1.9 1998/09/16 14:38:41 malthoff
+ * Rework the SK_LNK_xxx defines.
+ * Add error log message defines.
+ * Add prototypes for skxmac2.c
+ *
+ * Revision 1.8 1998/09/11 05:29:18 gklug
+ * add: init state of a port
+ *
+ * Revision 1.7 1998/09/08 08:35:52 gklug
+ * add: defines of the Init Levels
+ *
+ * Revision 1.6 1998/09/03 13:48:42 gklug
+ * add: Link strati, capabilities to Port struct
+ *
+ * Revision 1.5 1998/09/03 13:30:59 malthoff
+ * Add SK_LNK_BLINK and SK_LNK_PERM.
+ *
+ * Revision 1.4 1998/09/03 09:55:31 malthoff
+ * Add constants for parameters Dir and RstMode
+ * when calling SkGeStopPort().
+ * Rework the prototype section.
+ * Add Queue Address offsets PRxQOff, PXsQOff, and PXaQOff.
+ * Remove Ioc with IoC.
+ *
+ * Revision 1.3 1998/08/19 09:11:54 gklug
+ * fix: struct are removed from c-source (see CCC)
+ * add: typedefs for all structs
+ *
+ * Revision 1.2 1998/07/28 12:38:26 malthoff
+ * The prototypes got the parameter 'IoC'.
+ *
+ * Revision 1.1 1998/07/23 09:50:24 malthoff
+ * Created.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEINIT_H_
+#define __INC_SKGEINIT_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines ********************************************************************/
+
+/* modifying Link LED behaviour (used with SkGeLinkLED()) */
+#define SK_LNK_OFF LED_OFF
+#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
+#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON)
+#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
+
+/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
+#define SK_LED_OFF LED_OFF
+#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
+
+/* addressing LED Registers in SkGeXmitLED() */
+#define XMIT_LED_INI 0
+#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI)
+#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI)
+#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI)
+
+/* parameter 'Mode' when calling SkGeXmitLED() */
+#define SK_LED_DIS 0
+#define SK_LED_ENA 1
+#define SK_LED_TST 2
+
+/* Counter and Timer constants, for a host clock of 62.5 MHz */
+#define SK_XMIT_DUR 0x002faf08L /* 50 ms */
+#define SK_BLK_DUR 0x01dcd650L /* 500 ms */
+
+#define SK_DPOLL_DEF 0x00ee6b28L /* 250 ms at 62.5 MHz */
+
+#define SK_DPOLL_MAX 0x00ffffffL /* 268 ms at 62.5 MHz */
+ /* 215 ms at 78.12 MHz */
+
+#define SK_FACT_62 100 /* is given in percent */
+#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */
+#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */
+
+/* Timeout values */
+#define SK_MAC_TO_53 72 /* MAC arbiter timeout */
+#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */
+#define SK_PKT_TO_MAX 0xffff /* Maximum value */
+#define SK_RI_TO_53 36 /* RAM interface timeout */
+
+#define SK_PHY_ACC_TO 600000 /* PHY access timeout */
+
+/* RAM Buffer High Pause Threshold values */
+#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */
+#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
+#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
+
+#ifndef SK_BMU_RX_WM
+#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */
+#endif
+#ifndef SK_BMU_TX_WM
+#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */
+#endif
+
+/* XMAC II Rx High Watermark */
+#define SK_XM_RX_HI_WM 0x05aa /* 1450 */
+
+/* XMAC II Tx Threshold */
+#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */
+#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */
+#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */
+#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */
+
+/* values for GIPortUsage */
+#define SK_RED_LINK 1 /* redundant link usage */
+#define SK_MUL_LINK 2 /* multiple link usage */
+#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */
+
+/* Minimum RAM Buffer Rx Queue Size */
+#define SK_MIN_RXQ_SIZE 16 /* 16 kB */
+
+/* Minimum RAM Buffer Tx Queue Size */
+#define SK_MIN_TXQ_SIZE 16 /* 16 kB */
+
+/* Queue Size units */
+#define QZ_UNITS 0x7
+#define QZ_STEP 8
+
+/* Percentage of queue size from whole memory */
+/* 80 % for receive */
+#define RAM_QUOTA_RX 80L
+/* 0% for sync transfer */
+#define RAM_QUOTA_SYNC 0L
+/* the rest (20%) is taken for async transfer */
+
+/* Get the rounded queue size in Bytes in 8k steps */
+#define ROUND_QUEUE_SIZE(SizeInBytes) \
+ ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \
+ ~(QZ_STEP-1))
+
+/* Get the rounded queue size in KBytes in 8k steps */
+#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
+ ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
+
+/* Types of RAM Buffer Queues */
+#define SK_RX_SRAM_Q 1 /* small receive queue */
+#define SK_RX_BRAM_Q 2 /* big receive queue */
+#define SK_TX_RAM_Q 3 /* small or big transmit queue */
+
+/* parameter 'Dir' when calling SkGeStopPort() */
+#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */
+#define SK_STOP_RX 2 /* Stops the receive path */
+#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */
+
+/* parameter 'RstMode' when calling SkGeStopPort() */
+#define SK_SOFT_RST 1 /* perform a software reset */
+#define SK_HARD_RST 2 /* perform a hardware reset */
+
+/* Init Levels */
+#define SK_INIT_DATA 0 /* Init level 0: init data structures */
+#define SK_INIT_IO 1 /* Init level 1: init with IOs */
+#define SK_INIT_RUN 2 /* Init level 2: init for run time */
+
+/* Link Mode Parameter */
+#define SK_LMODE_HALF 1 /* Half Duplex Mode */
+#define SK_LMODE_FULL 2 /* Full Duplex Mode */
+#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */
+#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */
+#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */
+#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */
+#define SK_LMODE_INDETERMINATED 7 /* indeterminated */
+
+/* Auto-negotiation timeout in 100ms granularity */
+#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */
+
+/* Auto-negotiation error codes */
+#define SK_AND_OK 0 /* no error */
+#define SK_AND_OTHER 1 /* other error than below */
+#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */
+
+
+/* Link Speed Capabilities */
+#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */
+#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */
+#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */
+#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */
+#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Speed Parameter */
+#define SK_LSPEED_AUTO 1 /* Automatic resolution */
+#define SK_LSPEED_10MBPS 2 /* 10 Mbps */
+#define SK_LSPEED_100MBPS 3 /* 100 Mbps */
+#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */
+#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */
+
+/* Link Speed Current State */
+#define SK_LSPEED_STAT_UNKNOWN 1
+#define SK_LSPEED_STAT_10MBPS 2
+#define SK_LSPEED_STAT_100MBPS 3
+#define SK_LSPEED_STAT_1000MBPS 4
+#define SK_LSPEED_STAT_INDETERMINATED 5
+
+
+/* Link Capability Parameter */
+#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */
+#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */
+#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */
+#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */
+#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Mode Current State */
+#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */
+#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */
+#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */
+#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */
+
+/* Flow Control Mode Parameter (and capabilities) */
+#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */
+#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */
+#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */
+#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or
+ * just the remote station may send PAUSE
+ */
+#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */
+
+/* Flow Control Status Parameter */
+#define SK_FLOW_STAT_NONE 1 /* No Flow Control */
+#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */
+#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */
+#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */
+#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */
+
+/* Master/Slave Mode Capabilities */
+#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */
+#define SK_MS_CAP_MASTER (1<<1) /* This station is master */
+#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */
+#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */
+
+/* Set Master/Slave Mode Parameter (and capabilities) */
+#define SK_MS_MODE_AUTO 1 /* Automatic resolution */
+#define SK_MS_MODE_MASTER 2 /* This station is master */
+#define SK_MS_MODE_SLAVE 3 /* This station is slave */
+#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */
+
+/* Master/Slave Status Parameter */
+#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */
+#define SK_MS_STAT_MASTER 2 /* This station is Master */
+#define SK_MS_STAT_SLAVE 3 /* This station is Dlave */
+#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */
+#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */
+
+/* parameter 'Mode' when calling SkXmSetRxCmd() */
+#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */
+#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */
+#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */
+#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */
+#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */
+#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */
+#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */
+#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
+#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */
+#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */
+
+/* parameter 'Para' when calling SkMacSetRxTxEn() */
+#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */
+#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */
+#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */
+#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */
+#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */
+#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */
+
+/* States of PState */
+#define SK_PRT_RESET 0 /* the port is reset */
+#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */
+#define SK_PRT_INIT 2 /* the port is initialized */
+#define SK_PRT_RUN 3 /* the port has an active link */
+
+/* Default receive frame limit for Workaround of XMAC Errata */
+#define SK_DEF_RX_WA_LIM SK_CONSTU64(100)
+
+/* Link Partner Status */
+#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */
+#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */
+#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */
+
+/* Maximum Restarts before restart is ignored (3Com WA) */
+#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */
+
+/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
+#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */
+
+/* structures *****************************************************************/
+
+/*
+ * MAC specific functions
+ */
+typedef struct s_GeMacFunc {
+ int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+ int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+ SK_U16 StatAddr, SK_U32 *pVal);
+ int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+ int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+ SK_U16 IStatus, SK_U64 *pVal);
+} SK_GEMACFUNC;
+
+/*
+ * Port Structure
+ */
+typedef struct s_GePort {
+#ifndef SK_DIAG
+ SK_TIMER PWaTimer; /* Workaround Timer */
+ SK_TIMER HalfDupChkTimer;
+#endif /* SK_DIAG */
+ SK_U32 PPrevShorts; /* Previous short Counter checking */
+ SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */
+ SK_U64 PPrevRx; /* Previous RxOk Counter checking */
+ SK_U64 PRxLim; /* Previous RxOk Counter checking */
+ SK_U64 LastOctets; /* For half duplex hang check */
+ int PLinkResCt; /* Link Restart Counter */
+ int PAutoNegTimeOut;/* Auto-negotiation timeout current value */
+ int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */
+ int PRxQSize; /* Port Rx Queue Size in kB */
+ int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */
+ int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */
+ SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */
+ SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */
+ SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */
+ SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */
+ SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */
+ SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */
+ SK_U32 PRxOverCnt; /* Receive Overflow Counter */
+ int PRxQOff; /* Rx Queue Address Offset */
+ int PXsQOff; /* Synchronous Tx Queue Address Offset */
+ int PXaQOff; /* Asynchronous Tx Queue Address Offset */
+ int PhyType; /* PHY used on this port */
+ SK_U16 PhyId1; /* PHY Id1 on this port */
+ SK_U16 PhyAddr; /* MDIO/MDC PHY address */
+ SK_U16 PIsave; /* Saved Interrupt status word */
+ SK_U16 PSsave; /* Saved PHY status word */
+ SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */
+ SK_BOOL PState; /* Is port initialized ? */
+ SK_BOOL PLinkBroken; /* Is Link broken ? */
+ SK_BOOL PCheckPar; /* Do we check for parity errors ? */
+ SK_BOOL HalfDupTimerActive;
+ SK_U8 PLinkCap; /* Link Capabilities */
+ SK_U8 PLinkModeConf; /* Link Mode configured */
+ SK_U8 PLinkMode; /* Link Mode currently used */
+ SK_U8 PLinkModeStatus;/* Link Mode Status */
+ SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */
+ SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */
+ SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */
+ SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */
+ SK_U8 PFlowCtrlMode; /* Flow Control Mode */
+ SK_U8 PFlowCtrlStatus;/* Flow Control Status */
+ SK_U8 PMSCap; /* Master/Slave Capabilities */
+ SK_U8 PMSMode; /* Master/Slave Mode */
+ SK_U8 PMSStatus; /* Master/Slave Status */
+ SK_U8 PAutoNegFail; /* Auto-negotiation fail flag */
+ SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */
+ SK_U8 PCableLen; /* Cable Length */
+ SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */
+ SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */
+} SK_GEPORT;
+
+/*
+ * Gigabit Ethernet Initialization Struct
+ * (has to be included in the adapter context)
+ */
+typedef struct s_GeInit {
+ SK_U8 GIPciHwRev; /* PCI HW Revision Number */
+ SK_U8 GIChipId; /* Chip Identification Number */
+ SK_U8 GIChipRev; /* Chip Revision Number */
+ SK_BOOL GIGenesis; /* Genesis adapter ? */
+ SK_BOOL GICopperType; /* Copper Type adapter ? */
+ SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */
+ SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */
+ SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */
+ SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */
+ SK_BOOL GIYukonLite; /* YUKON-Lite chip */
+ int GIMacsFound; /* Number of MACs found on this adapter */
+ int GIMacType; /* MAC Type used on this adapter */
+ int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */
+ int GIPortUsage; /* Driver Port Usage */
+ int GILevel; /* Initialization Level completed */
+ int GIRamSize; /* The RAM size of the adapter in kB */
+ int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */
+ SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */
+ SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */
+ SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */
+ SK_GEMACFUNC GIFunc; /* MAC depedent functions */
+} SK_GEINIT;
+
+/*
+ * Error numbers and messages for skxmac2.c and skgeinit.c
+ */
+#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT)
+#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters"
+#define SKERR_HWI_E002 (SKERR_HWI_E001+1)
+#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing"
+#define SKERR_HWI_E003 (SKERR_HWI_E002+1)
+#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level"
+#define SKERR_HWI_E004 (SKERR_HWI_E003+1)
+#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured"
+#define SKERR_HWI_E005 (SKERR_HWI_E004+1)
+#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports"
+#define SKERR_HWI_E006 (SKERR_HWI_E005+1)
+#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state"
+#define SKERR_HWI_E007 (SKERR_HWI_E006+1)
+#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode"
+#define SKERR_HWI_E008 (SKERR_HWI_E007+1)
+#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode"
+#define SKERR_HWI_E009 (SKERR_HWI_E008+1)
+#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero"
+#define SKERR_HWI_E010 (SKERR_HWI_E009+1)
+#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters"
+#define SKERR_HWI_E011 (SKERR_HWI_E010+1)
+#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small"
+#define SKERR_HWI_E012 (SKERR_HWI_E011+1)
+#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified"
+#define SKERR_HWI_E013 (SKERR_HWI_E012+1)
+#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue"
+#define SKERR_HWI_E014 (SKERR_HWI_E013+1)
+#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified"
+#define SKERR_HWI_E015 (SKERR_HWI_E014+1)
+#define SKERR_HWI_E015MSG "Illegal Link mode parameter"
+#define SKERR_HWI_E016 (SKERR_HWI_E015+1)
+#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter"
+#define SKERR_HWI_E017 (SKERR_HWI_E016+1)
+#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal"
+#define SKERR_HWI_E018 (SKERR_HWI_E017+1)
+#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)"
+#define SKERR_HWI_E019 (SKERR_HWI_E018+1)
+#define SKERR_HWI_E019MSG "Illegal Speed parameter"
+#define SKERR_HWI_E020 (SKERR_HWI_E019+1)
+#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter"
+#define SKERR_HWI_E021 (SKERR_HWI_E020+1)
+#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter"
+#define SKERR_HWI_E022 (SKERR_HWI_E021+1)
+#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address"
+#define SKERR_HWI_E023 (SKERR_HWI_E022+1)
+#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small"
+#define SKERR_HWI_E024 (SKERR_HWI_E023+1)
+#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)"
+#define SKERR_HWI_E025 (SKERR_HWI_E024+1)
+#define SKERR_HWI_E025MSG ""
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_KR_PROTO
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void SkGePollRxD(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL PollRxD);
+
+extern void SkGePollTxD(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL PollTxD);
+
+extern void SkGeYellowLED(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int State);
+
+extern int SkGeCfgSync(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U32 IntTime,
+ SK_U32 LimCount,
+ int SyncMode);
+
+extern void SkGeLoadLnkSyncCnt(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U32 CntVal);
+
+extern void SkGeStopPort(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Dir,
+ int RstMode);
+
+extern int SkGeInit(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Level);
+
+extern void SkGeDeInit(
+ SK_AC *pAC,
+ SK_IOC IoC);
+
+extern int SkGeInitPort(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkGeXmitLED(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Led,
+ int Mode);
+
+extern void SkGeInitRamIface(
+ SK_AC *pAC,
+ SK_IOC IoC);
+
+extern int SkGeInitAssignRamToQueues(
+ SK_AC *pAC,
+ int ActivePort,
+ SK_BOOL DualNet);
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacSoftRst(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacHardRst(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkXmInitMac(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkGmInitMac(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacInitPhy(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL DoLoop);
+
+extern void SkMacIrqDisable(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacFlushTxFifo(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacFlushRxFifo(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacIrq(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern int SkMacAutoNegDone(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacAutoNegLipaPhy(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U16 IStatus);
+
+extern void SkMacSetRxTxEn(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Para);
+
+extern int SkMacRxTxEnable(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacPromiscMode(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+
+extern void SkMacHashing(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+
+extern void SkXmPhyRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 *pVal);
+
+extern void SkXmPhyWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 Val);
+
+extern void SkGmPhyRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 *pVal);
+
+extern void SkGmPhyWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 Val);
+
+extern void SkGePhyRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 *pVal);
+
+extern void SkGePhyWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 Val);
+
+extern void SkXmClrExactAddr(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int StartNum,
+ int StopNum);
+
+extern void SkXmInitDupMd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkXmInitPauseMd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkXmAutoNegLipaXmac(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U16 IStatus);
+
+extern int SkXmUpdateStats(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkGmUpdateStats(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkXmMacStatistic(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 StatAddr,
+ SK_U32 *pVal);
+
+extern int SkGmMacStatistic(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 StatAddr,
+ SK_U32 *pVal);
+
+extern int SkXmResetCounter(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkGmResetCounter(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkXmOverflowStatus(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 IStatus,
+ SK_U64 *pStatus);
+
+extern int SkGmOverflowStatus(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 MacStatus,
+ SK_U64 *pStatus);
+
+extern int SkGmCableDiagStatus(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL StartTest);
+
+#ifdef SK_DIAG
+extern void SkMacSetRxCmd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Mode);
+extern void SkMacCrcGener(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+extern void SkMacTimeStamp(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+extern void SkXmSendCont(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+#endif /* SK_DIAG */
+
+#else /* SK_KR_PROTO */
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void SkGePollRxD();
+extern void SkGePollTxD();
+extern void SkGeYellowLED();
+extern int SkGeCfgSync();
+extern void SkGeLoadLnkSyncCnt();
+extern void SkGeStopPort();
+extern int SkGeInit();
+extern void SkGeDeInit();
+extern int SkGeInitPort();
+extern void SkGeXmitLED();
+extern void SkGeInitRamIface();
+extern int SkGeInitAssignRamToQueues();
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable();
+extern void SkMacSoftRst();
+extern void SkMacHardRst();
+extern void SkMacInitPhy();
+extern int SkMacRxTxEnable();
+extern void SkMacPromiscMode();
+extern void SkMacHashing();
+extern void SkMacIrqDisable();
+extern void SkMacFlushTxFifo();
+extern void SkMacFlushRxFifo();
+extern void SkMacIrq();
+extern int SkMacAutoNegDone();
+extern void SkMacAutoNegLipaPhy();
+extern void SkMacSetRxTxEn();
+extern void SkGePhyRead();
+extern void SkGePhyWrite();
+extern void SkXmInitMac();
+extern void SkXmPhyRead();
+extern void SkXmPhyWrite();
+extern void SkGmInitMac();
+extern void SkGmPhyRead();
+extern void SkGmPhyWrite();
+extern void SkXmClrExactAddr();
+extern void SkXmInitDupMd();
+extern void SkXmInitPauseMd();
+extern void SkXmAutoNegLipaXmac();
+extern int SkXmUpdateStats();
+extern int SkGmUpdateStats();
+extern int SkXmMacStatistic();
+extern int SkGmMacStatistic();
+extern int SkXmResetCounter();
+extern int SkGmResetCounter();
+extern int SkXmOverflowStatus();
+extern int SkGmOverflowStatus();
+extern int SkGmCableDiagStatus();
+
+#ifdef SK_DIAG
+extern void SkMacSetRxCmd();
+extern void SkMacCrcGener();
+extern void SkMacTimeStamp();
+extern void SkXmSendCont();
+#endif /* SK_DIAG */
+
+#endif /* SK_KR_PROTO */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_SKGEINIT_H_ */