* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
* Patch by Andreas Mohr, 4 Sep 2003:
Fix a lot of spelling errors
diff --git a/drivers/sk98lin/h/skdebug.h b/drivers/sk98lin/h/skdebug.h
new file mode 100644
index 0000000..cc14e1c
--- /dev/null
+++ b/drivers/sk98lin/h/skdebug.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ * Name: skdebug.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.12 $
+ * Date: $Date: 2002/07/15 15:37:13 $
+ * Purpose: SK specific DEBUG support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skdebug.h,v $
+ * Revision 1.12 2002/07/15 15:37:13 rschmidt
+ * Power Management support
+ * Editorial changes
+ *
+ * Revision 1.11 2002/04/25 11:04:39 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.10 1999/11/22 13:47:40 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.9 1999/09/14 14:02:43 rwahl
+ * Added SK_DBGMOD_PECP.
+ *
+ * Revision 1.8 1998/11/25 08:31:54 gklug
+ * fix: no C++ comments allowed in common sources
+ *
+ * Revision 1.7 1998/11/24 16:47:24 swolf
+ * Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h").
+ *
+ * Revision 1.6 1998/10/28 10:23:55 rassmann
+ * ADDED SK_DBGMOD_ADDR.
+ *
+ * Revision 1.5 1998/10/22 09:43:55 gklug
+ * add: CSUM module
+ *
+ * Revision 1.4 1998/10/01 07:54:44 gklug
+ * add: PNMI debug module
+ *
+ * Revision 1.3 1998/09/18 08:32:34 afischer
+ * Macros changed according ssr-spec.:
+ * SK_DBG_MODCHK -> SK_DBG_CHKMOD
+ * SK_DBG_CATCHK -> SK_DBG_CHKCAT
+ *
+ * Revision 1.2 1998/07/03 14:38:25 malthoff
+ * Add category SK_DBGCAT_FATAL.
+ *
+ * Revision 1.1 1998/06/19 13:39:01 malthoff
+ * created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDEBUG_H
+#define __INC_SKDEBUG_H
+
+#ifdef DEBUG
+#ifndef SK_DBG_MSG
+#define SK_DBG_MSG(pAC,comp,cat,arg) \
+ if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \
+ ((cat) & SK_DBG_CHKCAT(pAC)) ) { \
+ SK_DBG_PRINTF arg ; \
+ }
+#endif
+#else
+#define SK_DBG_MSG(pAC,comp,lev,arg)
+#endif
+
+/* PLS NOTE:
+ * =========
+ * Due to any restrictions of kernel printf routines do not use other
+ * format identifiers as: %x %d %c %s .
+ * Never use any combined format identifiers such as: %lx %ld in your
+ * printf - argument (arg) because some OS specific kernel printfs may
+ * only support some basic identifiers.
+ */
+
+/* Debug modules */
+
+#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */
+#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
+#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
+#define SK_DBGMOD_VPD 0x00000008L /* VPD module */
+#define SK_DBGMOD_I2C 0x00000010L /* I2C module */
+#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
+#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
+#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
+#define SK_DBGMOD_PECP 0x00000100L /* PECP module */
+#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */
+
+/* Debug events */
+
+#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */
+#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */
+#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */
+#define SK_DBGCAT_TX 0x00000008L /* transmit path */
+#define SK_DBGCAT_RX 0x00000010L /* receive path */
+#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */
+#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */
+#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */
+#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */
+
+#endif /* __INC_SKDEBUG_H */