* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
* Patch by Andreas Mohr, 4 Sep 2003:
Fix a lot of spelling errors
diff --git a/drivers/sk98lin/Makefile b/drivers/sk98lin/Makefile
new file mode 100644
index 0000000..0868587
--- /dev/null
+++ b/drivers/sk98lin/Makefile
@@ -0,0 +1,102 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# File: drivers/sk98lin/Makefile
+#
+# Makefile for the SysKonnect SK-98xx device driver.
+#
+
+LIB := libsk98lin.a
+
+OBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
+ ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
+ skxmac2.o skcsum.o #skproc.o
+
+OBJS += uboot_skb.o uboot_drv.o
+
+# DBGDEF = \
+# -DDEBUG
+
+ifdef DEBUG
+DBGDEF += \
+-DSK_DEBUG_CHKMOD=0x00000000L \
+-DSK_DEBUG_CHKCAT=0x00000000L
+endif
+
+
+# **** possible debug modules for SK_DEBUG_CHKMOD *****************
+# SK_DBGMOD_MERR 0x00000001L /* general module error indication */
+# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
+# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
+# SK_DBGMOD_VPD 0x00000008L /* VPD module */
+# SK_DBGMOD_I2C 0x00000010L /* I2C module */
+# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
+# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
+# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
+# SK_DBGMOD_DRV 0x00010000L /* DRV module */
+
+# **** possible debug categories for SK_DEBUG_CHKCAT **************
+# *** common modules ***
+# SK_DBGCAT_INIT 0x00000001L module/driver initialization
+# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL)
+# SK_DBGCAT_ERR 0x00000004L error handling paths
+# SK_DBGCAT_TX 0x00000008L transmit path
+# SK_DBGCAT_RX 0x00000010L receive path
+# SK_DBGCAT_IRQ 0x00000020L general IRQ handling
+# SK_DBGCAT_QUEUE 0x00000040L any queue management
+# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump
+# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump
+
+# *** driver (file skge.c) ***
+# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points
+# SK_DBGCAT_DRV_??? 0x00020000 not used
+# SK_DBGCAT_DRV_MCA 0x00040000 multicast
+# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path
+# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path
+# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime
+# SK_DBGCAT_DRV_??? 0x00400000 not used
+# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode
+# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames
+# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions
+# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
+# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
+
+EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
+
+CFLAGS += $(EXTRA_CFLAGS)
+
+
+all: $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
+
+