diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 08d38fe..d4b89b1 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -554,11 +554,14 @@
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-inet-86vs.dtb \
 	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
 	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
 	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
@@ -613,17 +616,22 @@
 	sun8i-a23-evb.dtb \
 	sun8i-a23-gt90h-v4.dtb \
 	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-polaroid-mid2407pxe03.dtb \
 	sun8i-a23-polaroid-mid2809pxe04.dtb \
 	sun8i-a23-q8-tablet.dtb
 dtb-$(CONFIG_MACH_SUN8I_A33) += \
+	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-olinuxino.dtb \
 	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb \
 	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic-edition.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb
 dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
diff --git a/arch/arm/dts/axp22x.dtsi b/arch/arm/dts/axp22x.dtsi
index 87fb08e..a020c12 100644
--- a/arch/arm/dts/axp22x.dtsi
+++ b/arch/arm/dts/axp22x.dtsi
@@ -52,12 +52,17 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp221-ac-power-supply";
 		status = "disabled";
 	};
 
-	battery_power_supply: battery-power-supply {
+	axp_adc: adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp221-battery-power-supply";
 		status = "disabled";
 	};
@@ -158,7 +163,7 @@
 		};
 	};
 
-	usb_power_supply: usb_power_supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp221-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
index 39504d7..04b0e6d 100644
--- a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t003>;
 
-		red {
+		led {
 			label = "t003-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";
@@ -75,8 +75,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -89,8 +87,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -106,13 +102,7 @@
 };
 
 &pio {
-	mmc0_cd_pin_t003: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_t003: led_pins@0 {
+	led_pins_t003: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -131,7 +121,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
index 8d4fb93..667bc2d 100644
--- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t004>;
 
-		red {
+		led {
 			label = "t004-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";
@@ -71,8 +71,6 @@
 
 	reg_vmmc1: vmmc1 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
 		regulator-name = "vmmc1";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -86,8 +84,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -100,8 +96,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -109,8 +103,6 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vmmc1>;
 	bus-width = <4>;
 	non-removable;
@@ -127,24 +119,7 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG12";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
-		pins = "PB18";
-		function = "gpio_out";
-	};
-
-	led_pins_t004: led_pins@0 {
+	led_pins_t004: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -158,7 +133,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -168,9 +143,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts
index dd7fd5c..d021940 100644
--- a/arch/arm/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/dts/sun5i-a10s-mk802.dts
@@ -59,10 +59,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_mk802>;
 
-		red {
+		led {
 			label = "mk802:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 		};
@@ -74,8 +72,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -88,8 +84,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -97,8 +91,6 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -113,33 +105,14 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_mk802: led_pins@0 {
-		pins = "PB2";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_mk802>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
index 2c902ed..5832bb3 100644
--- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
@@ -79,7 +79,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a10s-olinuxino-micro:green:usr";
 			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -97,8 +97,8 @@
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_b>;
-	phy = <&phy1>;
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -117,8 +117,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -130,11 +128,9 @@
 #include "axp152.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c16";
 		pagesize = <16>;
 		reg = <0x50>;
@@ -143,8 +139,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -152,35 +146,35 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -197,8 +191,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -206,8 +198,6 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
@@ -223,34 +213,11 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-		pins = "PG13";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PE3";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG12";
-		function = "gpio_in";
-		bias-pull-up;
-	};
 };
 
 &reg_usb0_vbus {
@@ -259,15 +226,14 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_b>,
-		    <&spi2_cs0_pins_b>;
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
 	status = "okay";
 };
 
@@ -277,19 +243,19 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_b>;
+	pinctrl-0 = <&uart2_pc_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>;
 	status = "okay";
 };
 
@@ -299,9 +265,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
index 034853d..964360f 100644
--- a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -63,7 +63,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_r7>;
 
-		green {
+		led {
 			label = "r7-tv-dongle:green:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -76,8 +76,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -85,8 +83,6 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -98,33 +94,21 @@
 };
 
 &pio {
-	mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_r7: led_pins@0 {
+	led_pins_r7: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-		pins = "PG13";
-		function = "gpio_out";
-	};
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_r7>;
 	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/dts/sun5i-a10s-wobo-i5.dts
index 3f68ef5..ef8baa9 100644
--- a/arch/arm/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/dts/sun5i-a10s-wobo-i5.dts
@@ -61,10 +61,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_wobo_i5>;
 
-		blue {
+		led {
 			label = "a10s-wobo-i5:blue:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -73,8 +71,6 @@
 
 	reg_emac_3v3: emac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emac_power_pin_wobo>;
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -94,8 +90,8 @@
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&emac_pd_pins>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -104,8 +100,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -126,8 +120,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
@@ -142,24 +134,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_wobo_i5: led_pins@0 {
-		pins = "PB2";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
-		pins = "PB3";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	emac_power_pin_wobo: emac_power_pin@0 {
-		pins = "PA02";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -206,7 +180,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi
index 316cb8b..09c486b 100644
--- a/arch/arm/dts/sun5i-a10s.dtsi
+++ b/arch/arm/dts/sun5i-a10s.dtsi
@@ -42,15 +42,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include "sun5i.dtsi"
 
 #include <dt-bindings/dma/sun4i-a10.h>
 
 / {
-	interrupt-parent = <&intc>;
-
 	aliases {
 		ethernet0 = &emac;
 	};
@@ -60,7 +56,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@2 {
+		framebuffer-lcd0-hdmi {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -76,7 +72,7 @@
 		allwinner,pipelines = <&fe0>;
 	};
 
-	soc@1c00000 {
+	soc {
 		hdmi: hdmi@1c16000 {
 			compatible = "allwinner,sun5i-a10s-hdmi";
 			reg = <0x01c16000 0x1000>;
@@ -104,8 +100,6 @@
 				};
 
 				hdmi_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 				};
 			};
@@ -125,20 +119,25 @@
 	compatible = "allwinner,sun5i-a10s-ccu";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
 &pio {
 	compatible = "allwinner,sun5i-a10s-pinctrl";
 
-	uart0_pins_a: uart0@0 {
+	uart0_pb_pins: uart0-pb-pins {
 		pins = "PB19", "PB20";
 		function = "uart0";
 	};
 
-	uart2_pins_b: uart2@1 {
+	uart2_pc_pins: uart2-pc-pins {
 		pins = "PC18", "PC19";
 		function = "uart2";
 	};
 
-	emac_pins_b: emac0@1 {
+	emac_pa_pins: emac-pa-pins {
 		pins = "PA0", "PA1", "PA2",
 				"PA3", "PA4", "PA5", "PA6",
 				"PA7", "PA8", "PA9", "PA10",
@@ -147,27 +146,24 @@
 		function = "emac";
 	};
 
-	mmc1_pins_a: mmc1@0 {
+	mmc1_pins: mmc1-pins {
 		pins = "PG3", "PG4", "PG5",
 				 "PG6", "PG7", "PG8";
 		function = "mmc1";
 		drive-strength = <30>;
 	};
 
-	spi2_pins_b: spi2@1 {
+	spi2_pb_pins: spi2-pb-pins {
 		pins = "PB12", "PB13", "PB14";
 		function = "spi2";
 	};
 
-	spi2_cs0_pins_b: spi2_cs0@1 {
+	spi2_cs0_pb_pin: spi2-cs0-pb-pin {
 		pins = "PB11";
 		function = "spi2";
 	};
 };
 
-&sram_a {
-};
-
 &tcon0_out {
 	tcon0_out_hdmi: endpoint@2 {
 		reg = <2>;
diff --git a/arch/arm/dts/sun5i-a13-ampe-a76.dts b/arch/arm/dts/sun5i-a13-ampe-a76.dts
index 1bf8881..7bc3532 100644
--- a/arch/arm/dts/sun5i-a13-ampe-a76.dts
+++ b/arch/arm/dts/sun5i-a13-ampe-a76.dts
@@ -23,6 +23,6 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
index 378214d..d059388 100644
--- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
@@ -61,6 +61,7 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
 		/* TODO: backlight uses axp gpio1 as enable pin */
 	};
 
@@ -78,8 +79,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -91,8 +90,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	pcf8563: rtc@51 {
@@ -105,14 +102,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -121,8 +118,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -133,29 +128,9 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_d709: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -197,7 +172,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -207,10 +182,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
diff --git a/arch/arm/dts/sun5i-a13-hsg-h702.dts b/arch/arm/dts/sun5i-a13-hsg-h702.dts
index 7ee0c3f..9b9f2a5 100644
--- a/arch/arm/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/dts/sun5i-a13-hsg-h702.dts
@@ -69,8 +69,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -80,8 +78,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	pcf8563: rtc@51 {
@@ -91,8 +87,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -100,14 +94,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -116,8 +110,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -132,25 +124,6 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-	};
-};
-
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -191,7 +164,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -201,9 +174,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
 	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/dts/sun5i-a13-inet-86vs.dts b/arch/arm/dts/sun5i-a13-inet-86vs.dts
index aef733b..9c43a34 100644
--- a/arch/arm/dts/sun5i-a13-inet-86vs.dts
+++ b/arch/arm/dts/sun5i-a13-inet-86vs.dts
@@ -23,6 +23,6 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun5i-a13-licheepi-one.dts b/arch/arm/dts/sun5i-a13-licheepi-one.dts
new file mode 100644
index 0000000..2ce361f
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-licheepi-one.dts
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun5i-a13-olinuxino.dts, which is
+ *   Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *   Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi One";
+	compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label ="licheepi:red:usr";
+			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label ="licheepi:green:usr";
+			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label ="licheepi:blue:usr";
+			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-984 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <984126>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "csi-1.8v";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "csi-2.8v";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
index aa4b34f..bfe1075 100644
--- a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
@@ -64,7 +64,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinom>;
 
-		power {
+		led {
 			label = "a13-olinuxino-micro:green:power";
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -77,26 +77,18 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -112,56 +104,26 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxinom: led_pins@0 {
+	led_pins_olinuxinom: led-pin {
 		pins = "PG9";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 {
-		pins = "PG12";
-		function = "gpio_out";
-	};
-
-	usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
-		pins = "PG11";
-		function = "gpio_out";
-	};
 };
 
 &reg_usb0_vbus {
-	pinctrl-0 = <&usb0_vbus_pin_olinuxinom>;
 	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -171,10 +133,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts
index 437ad91..fadeae3 100644
--- a/arch/arm/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/dts/sun5i-a13-olinuxino.dts
@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		power {
+		led {
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
@@ -74,8 +74,6 @@
 
 	bridge {
 		compatible = "dumb-vga-dac";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -123,8 +121,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -138,14 +134,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -153,35 +145,35 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -190,8 +182,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -207,34 +197,11 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PG9";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-		pins = "PG11";
-		function = "gpio_out";
-	};
 };
 
 &reg_usb0_vbus {
@@ -243,7 +210,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -263,7 +229,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -273,10 +239,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 0000000..d604077
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-q8-tablet.dts b/arch/arm/dts/sun5i-a13-q8-tablet.dts
index a89f29f..f9fc1c8 100644
--- a/arch/arm/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/dts/sun5i-a13-q8-tablet.dts
@@ -49,19 +49,13 @@
 	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
 
 	panel: panel {
-		compatible = "urt,umsh-8596md-t", "simple-panel";
-		#address-cells = <1>;
-		#size-cells = <0>;
+		compatible = "bananapi,s070wv20-ct16";
+		power-supply = <&reg_vcc3v3>;
+		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
+		backlight = <&backlight>;
 
-		port@0 {
-			reg = <0>;
-			/* TODO: lcd panel uses axp gpio0 as enable pin */
-			backlight = <&backlight>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_lcd>;
 			};
 		};
diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
index bfdd38d..be486d2 100644
--- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -58,13 +58,11 @@
 		/delete-property/stdout-path;
 	};
 
-	i2c_lcd: i2c@0 {
+	i2c_lcd: i2c {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_lcd_pins>;
-		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
-			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+		scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
 		i2c-gpio,delay-us = <5>;
 	};
 };
@@ -79,13 +77,9 @@
 	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
 };
 
-&codec_pa_pin {
-	pins = "PG3";
-};
-
 &mmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
+	pinctrl-0 = <&mmc2_8bit_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <8>;
 	non-removable;
@@ -98,14 +92,6 @@
 	};
 };
 
-&pio {
-	i2c_lcd_pins: i2c_lcd_pin@0 {
-		pins = "PG10", "PG12";
-		function = "gpio_out";
-		bias-pull-up;
-	};
-};
-
 &reg_usb0_vbus {
 	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 };
@@ -128,7 +114,3 @@
 	/* The P66 uses the uart pins as gpios */
 	status = "disabled";
 };
-
-&usb0_vbus_pin_a {
-	pins = "PB4";
-};
diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi
index b1d8277..3325ab0 100644
--- a/arch/arm/dts/sun5i-a13.dtsi
+++ b/arch/arm/dts/sun5i-a13.dtsi
@@ -42,17 +42,13 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include "sun5i.dtsi"
 
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	interrupt-parent = <&intc>;
-
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -88,7 +84,7 @@
 		allwinner,pipelines = <&fe0>;
 	};
 
-	soc@1c00000 {
+	soc {
 		pwm: pwm@1c20e00 {
 			compatible = "allwinner,sun5i-a13-pwm";
 			reg = <0x01c20e00 0xc>;
@@ -106,15 +102,14 @@
 
 &cpu0 {
 	clock-latency = <244144>; /* 8 32k periods */
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		1008000 1400000
-		912000	1350000
-		864000	1300000
-		624000	1200000
-		576000	1200000
-		432000	1200000
-		>;
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
 	#cooling-cells = <2>;
 };
 
diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts
index c55b11a..a32cde3 100644
--- a/arch/arm/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/dts/sun5i-gr8-chip-pro.dts
@@ -79,8 +79,6 @@
 
 	mmc0_pwrseq: mmc0_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
 	};
 };
@@ -94,8 +92,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -114,20 +110,16 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "disabled";
 };
 
 &i2s0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
 	status = "disabled";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc0_pwrseq>;
 	bus-width = <4>;
@@ -137,12 +129,10 @@
 
 &nfc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
 	status = "okay";
 
 	nand@0 {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		reg = <0>;
 		allwinner,rb = <0>;
 		nand-ecc-mode = "hw";
@@ -157,21 +147,9 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_pin_chip_pro: usb0-id-pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-	};
-
-	wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
 	status = "disabled";
 };
 
@@ -220,19 +198,19 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+	pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
 	status = "disabled";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
 	status = "okay";
 };
 
@@ -253,9 +231,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pin_chip_pro>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
diff --git a/arch/arm/dts/sun5i-gr8-evb.dts b/arch/arm/dts/sun5i-gr8-evb.dts
new file mode 100644
index 0000000..f4fe258
--- /dev/null
+++ b/arch/arm/dts/sun5i-gr8-evb.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_vcc3v3>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "gr8-evb-wm8978";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-gr8.dtsi b/arch/arm/dts/sun5i-gr8.dtsi
index ef0b744..98a8fd5 100644
--- a/arch/arm/dts/sun5i-gr8.dtsi
+++ b/arch/arm/dts/sun5i-gr8.dtsi
@@ -54,7 +54,7 @@
 		allwinner,pipelines = <&fe0>;
 	};
 
-	soc@1c00000 {
+	soc {
 		pwm: pwm@1c20e00 {
 			compatible = "allwinner,sun5i-a10s-pwm";
 			reg = <0x01c20e00 0xc>;
@@ -98,28 +98,28 @@
 &pio {
 	compatible = "nextthing,gr8-pinctrl";
 
-	i2s0_data_pins_a: i2s0-data@0 {
+	i2s0_data_pins: i2s0-data-pins {
 		pins = "PB6", "PB7", "PB8", "PB9";
 		function = "i2s0";
 	};
 
-	i2s0_mclk_pins_a: i2s0-mclk@0 {
+	i2s0_mclk_pin: i2s0-mclk-pin {
 		pins = "PB5";
 		function = "i2s0";
 	};
 
-	pwm1_pins: pwm1 {
+	pwm1_pins: pwm1-pin {
 		pins = "PG13";
 		function = "pwm1";
 	};
 
-	spdif_tx_pins_a: spdif@0 {
+	spdif_tx_pin: spdif-tx-pin {
 		pins = "PB10";
 		function = "spdif";
 		bias-pull-up;
 	};
 
-	uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+	uart1_cts_rts_pins: uart1-cts-rts-pins {
 		pins = "PG5", "PG6";
 		function = "uart1";
 	};
diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts
index 879a4b0..4bf4943 100644
--- a/arch/arm/dts/sun5i-r8-chip.dts
+++ b/arch/arm/dts/sun5i-r8-chip.dts
@@ -79,16 +79,12 @@
 
 	mmc0_pwrseq: mmc0_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&chip_wifi_reg_on_pin>;
 		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
 	};
 
 	onewire {
 		compatible = "w1-gpio";
-		gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&chip_w1_pin>;
+		gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
 	};
 };
 
@@ -109,8 +105,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -137,14 +131,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "disabled";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	xio: gpio@38 {
@@ -161,13 +151,11 @@
 	};
 };
 
-&mmc0_pins_a {
+&mmc0_pins {
 	bias-pull-up;
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc0_pwrseq>;
 	bus-width = <4>;
@@ -183,29 +171,6 @@
 	status = "okay";
 };
 
-&pio {
-	chip_vbus_pin: chip_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-
-	chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
-	        pins = "PC19";
-	        function = "gpio_out";
-	};
-
-	chip_id_det_pin: chip_id_det_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-	};
-
-	chip_w1_pin: chip_w1_pin@0 {
-		pins = "PD2";
-		function = "gpio_in";
-	        bias-pull-up;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-min-microvolt = <1000000>;
 	regulator-max-microvolt = <1400000>;
@@ -260,7 +225,6 @@
 };
 
 &reg_usb0_vbus {
-	pinctrl-0 = <&chip_vbus_pin>;
 	vin-supply = <&reg_vcc5v0>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
 	status = "okay";
@@ -268,7 +232,7 @@
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
+	pinctrl-0 = <&spi2_pe_pins>;
 	status = "disabled";
 };
 
@@ -282,14 +246,14 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>,
-		    <&uart3_cts_rts_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>,
+		    <&uart3_cts_rts_pg_pins>;
 	status = "okay";
 };
 
@@ -303,11 +267,9 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&chip_id_det_pin>;
 	status = "okay";
 
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_vcc5v0>;
diff --git a/arch/arm/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/dts/sun5i-reference-design-tablet.dtsi
index 8acbaab..6847f66 100644
--- a/arch/arm/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/dts/sun5i-reference-design-tablet.dtsi
@@ -54,7 +54,8 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
-		/* TODO: backlight uses axp gpio1 as enable pin */
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+		power-supply = <&reg_vcc3v0>;
 	};
 
 	chosen {
@@ -63,8 +64,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
 	status = "okay";
 };
@@ -92,11 +91,10 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_power_pin>;
 		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
 		/* Tablet dts must provide reg and compatible */
 		status = "disabled";
@@ -124,7 +122,7 @@
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -135,43 +133,6 @@
 	status = "okay";
 };
 
-&pio {
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PG10";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	ts_power_pin: ts_power_pin {
-		pins = "PB3";
-		function = "gpio_out";
-		drive-strength = <10>;
-		bias-disable;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		pins = "PG12";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -210,7 +171,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -224,10 +185,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi
index 07f2248..250d6b8 100644
--- a/arch/arm/dts/sun5i.dtsi
+++ b/arch/arm/dts/sun5i.dtsi
@@ -42,14 +42,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/sun5i-ccu.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/reset/sun5i-ccu.h>
 
 / {
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -68,7 +68,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		framebuffer-lcd0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -77,7 +77,7 @@
 			status = "disabled";
 		};
 
-		framebuffer@1 {
+		framebuffer-lcd0-tve0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
@@ -93,14 +93,14 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: clk@1c20050 {
+		osc24M: clk-24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: clk@0 {
+		osc32k: clk-32k {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -108,14 +108,30 @@
 		};
 	};
 
-	soc@1c00000 {
-		compatible = "simple-bus";
+	reserved-memory {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		sram-controller@1c00000 {
-			compatible = "allwinner,sun4i-a10-sram-controller";
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun5i-a13-system-control";
 			reg = <0x01c00000 0x30>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -127,12 +143,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x00000000 0xc000>;
-			};
 
-			emac_sram: sram-section@8000 {
-				compatible = "allwinner,sun4i-a10-sram-a3-a4";
-				reg = <0x8000 0x4000>;
-				status = "disabled";
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun5i-a13-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
 			};
 
 			sram_d: sram@10000 {
@@ -143,11 +160,36 @@
 				ranges = <0 0x00010000 0x1000>;
 
 				otg_sram: sram-section@0 {
-					compatible = "allwinner,sun4i-a10-sram-d";
+					compatible = "allwinner,sun5i-a13-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
 					reg = <0x0000 0x1000>;
 					status = "disabled";
 				};
 			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c01000 {
+			compatible = "allwinner,sun5i-a13-mbus";
+			reg = <0x01c01000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x20000000>;
+			#interconnect-cells = <1>;
 		};
 
 		dma: dma-controller@1c02000 {
@@ -158,7 +200,7 @@
 			#dma-cells = <2>;
 		};
 
-		nfc: nand@1c03000 {
+		nfc: nand-controller@1c03000 {
 			compatible = "allwinner,sun4i-a10-nand";
 			reg = <0x01c03000 0x1000>;
 			interrupts = <37>;
@@ -207,11 +249,8 @@
 			status = "disabled";
 
 			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				tve0_in_tcon0: endpoint@0 {
-					reg = <0>;
+				tve0_in_tcon0: endpoint {
 					remote-endpoint = <&tcon0_out_tve0>;
 				};
 			};
@@ -238,6 +277,7 @@
 			compatible = "allwinner,sun5i-a13-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 			resets = <&ccu RST_LCD>;
 			reset-names = "lcd";
 			clocks = <&ccu CLK_AHB_LCD>,
@@ -247,6 +287,7 @@
 				      "tcon-ch0",
 				      "tcon-ch1";
 			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
 			status = "disabled";
 
 			ports {
@@ -254,12 +295,9 @@
 				#size-cells = <0>;
 
 				tcon0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					tcon0_in_be0: endpoint@0 {
-						reg = <0>;
+					tcon0_in_be0: endpoint {
 						remote-endpoint = <&be0_out_tcon0>;
 					};
 				};
@@ -278,12 +316,25 @@
 			};
 		};
 
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun5i-a13-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
 			clock-names = "ahb", "mmc";
 			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -321,13 +372,14 @@
 			phy-names = "usb";
 			extcon = <&usbphy 0>;
 			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
 			status = "disabled";
 		};
 
 		usbphy: phy@1c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&ccu CLK_USB_PHY0>;
 			clock-names = "usb_phy";
@@ -404,7 +456,7 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			emac_pins_a: emac0@0 {
+			emac_pd_pins: emac-pd-pins {
 				pins = "PD6", "PD7", "PD10",
 				       "PD11", "PD12", "PD13", "PD14",
 				       "PD15", "PD18", "PD19", "PD20",
@@ -413,27 +465,27 @@
 				function = "emac";
 			};
 
-			i2c0_pins_a: i2c0@0 {
+			i2c0_pins: i2c0-pins {
 				pins = "PB0", "PB1";
 				function = "i2c0";
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins: i2c1-pins {
 				pins = "PB15", "PB16";
 				function = "i2c1";
 			};
 
-			i2c2_pins_a: i2c2@0 {
+			i2c2_pins: i2c2-pins {
 				pins = "PB17", "PB18";
 				function = "i2c2";
 			};
 
-			ir0_rx_pins_a: ir0@0 {
+			ir0_rx_pin: ir0-rx-pin {
 				pins = "PB4";
 				function = "ir0";
 			};
 
-			lcd_rgb565_pins: lcd_rgb565@0 {
+			lcd_rgb565_pins: lcd-rgb565-pins {
 				pins = "PD3", "PD4", "PD5", "PD6", "PD7",
 						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
 						 "PD19", "PD20", "PD21", "PD22", "PD23",
@@ -441,7 +493,7 @@
 				function = "lcd0";
 			};
 
-			lcd_rgb666_pins: lcd_rgb666@0 {
+			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
 				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
 				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
@@ -449,7 +501,7 @@
 				function = "lcd0";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
 				function = "mmc0";
@@ -457,7 +509,15 @@
 				bias-pull-up;
 			};
 
-			mmc2_pins_a: mmc2@0 {
+			mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 				       "PC10", "PC11", "PC12", "PC13",
 				       "PC14", "PC15";
@@ -466,15 +526,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_4bit_pins_a: mmc2-4bit@0 {
-				pins = "PC6", "PC7", "PC8", "PC9",
-				       "PC10", "PC11";
-				function = "mmc2";
-				drive-strength = <30>;
-				bias-pull-up;
-			};
-
-			nand_pins_a: nand-base0@0 {
+			nand_pins: nand-pins {
 				pins = "PC0", "PC1", "PC2",
 				       "PC5", "PC8", "PC9", "PC10",
 				       "PC11", "PC12", "PC13", "PC14",
@@ -482,72 +534,79 @@
 				function = "nand0";
 			};
 
-			nand_cs0_pins_a: nand-cs@0 {
+			nand_cs0_pin: nand-cs0-pin {
 				pins = "PC4";
 				function = "nand0";
 			};
 
-			nand_rb0_pins_a: nand-rb@0 {
+			nand_rb0_pin: nand-rb0-pin {
 				pins = "PC6";
 				function = "nand0";
 			};
 
-			spi2_pins_a: spi2@0 {
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			spi2_pe_pins: spi2-pe-pins {
 				pins = "PE1", "PE2", "PE3";
 				function = "spi2";
 			};
 
-			spi2_cs0_pins_a: spi2-cs0@0 {
+			spi2_cs0_pe_pin: spi2-cs0-pe-pin {
 				pins = "PE0";
 				function = "spi2";
 			};
 
-			uart1_pins_a: uart1@0 {
+			uart1_pe_pins: uart1-pe-pins {
 				pins = "PE10", "PE11";
 				function = "uart1";
 			};
 
-			uart1_pins_b: uart1@1 {
+			uart1_pg_pins: uart1-pg-pins {
 				pins = "PG3", "PG4";
 				function = "uart1";
 			};
 
-			uart2_pins_a: uart2@0 {
+			uart2_pd_pins: uart2-pd-pins {
 				pins = "PD2", "PD3";
 				function = "uart2";
 			};
 
-			uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+			uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
 				pins = "PD4", "PD5";
 				function = "uart2";
 			};
 
-			uart3_pins_a: uart3@0 {
+			uart3_pg_pins: uart3-pg-pins {
 				pins = "PG9", "PG10";
 				function = "uart3";
 			};
 
-			uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
 				pins = "PG11", "PG12";
 				function = "uart3";
 			};
-
-			pwm0_pins: pwm0 {
-				pins = "PB2";
-				function = "pwm";
-			};
 		};
 
 		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
 			clocks = <&ccu CLK_HOSC>;
 		};
 
 		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
 		};
 
 		ir0: ir@1c21800 {
@@ -636,6 +695,8 @@
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -646,6 +707,8 @@
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -656,11 +719,25 @@
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>, <70>, <71>, <72>,  <73>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <320000000>;
+		};
+
 		timer@1c60000 {
 			compatible = "allwinner,sun5i-a13-hstimer";
 			reg = <0x01c60000 0x1000>;
@@ -677,6 +754,8 @@
 			clock-names = "ahb", "mod",
 				      "ram";
 			resets = <&ccu RST_DE_FE>;
+			interconnects = <&mbus 19>;
+			interconnect-names = "dma-mem";
 			status = "disabled";
 
 			ports {
@@ -684,12 +763,9 @@
 				#size-cells = <0>;
 
 				fe0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					fe0_out_be0: endpoint@0 {
-						reg = <0>;
+					fe0_out_be0: endpoint {
 						remote-endpoint = <&be0_in_fe0>;
 					};
 				};
@@ -705,33 +781,26 @@
 			clock-names = "ahb", "mod",
 				      "ram";
 			resets = <&ccu RST_DE_BE>;
+			interconnects = <&mbus 18>;
+			interconnect-names = "dma-mem";
 			status = "disabled";
 
-			assigned-clocks = <&ccu CLK_DE_BE>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				be0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					be0_in_fe0: endpoint@0 {
-						reg = <0>;
+					be0_in_fe0: endpoint {
 						remote-endpoint = <&fe0_out_be0>;
 					};
 				};
 
 				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					be0_out_tcon0: endpoint@0 {
-						reg = <0>;
+					be0_out_tcon0: endpoint {
 						remote-endpoint = <&tcon0_in_be0>;
 					};
 				};
diff --git a/arch/arm/dts/sun6i-a31-app4-evb1.dts b/arch/arm/dts/sun6i-a31-app4-evb1.dts
index 7f34323..32d2202 100644
--- a/arch/arm/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/dts/sun6i-a31-app4-evb1.dts
@@ -65,22 +65,14 @@
 	status = "okay";
 };
 
-&pio {
-	usb1_vbus_pin_a: usb1_vbus_pin@0 {
-		pins = "PH27";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_a>;
 	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts
index 939c497..93a15ea 100644
--- a/arch/arm/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/dts/sun6i-a31-colombus.dts
@@ -60,13 +60,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	i2c_lcd: i2c@0 {
+	i2c_lcd: i2c {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_lcd_pins>;
-		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
-			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+		sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+		scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
 		i2c-gpio,delay-us = <5>;
 	};
 };
@@ -77,31 +75,21 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "fail";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	mma8452: mma8452@1d {
@@ -112,48 +100,27 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	bias-pull-up;
-};
-
-&pio {
-	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-		pins = "PH24";
-		function = "gpio_out";
-	};
-
-	i2c_lcd_pins: i2c_lcd_pin@0 {
-		pins = "PA23", "PA24";
-		function = "gpio_out";
-		bias-pull-up;
-	};
-};
-
 &reg_usb2_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_vbus_pin_colombus>;
 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts
index 2c14358..486cec6 100644
--- a/arch/arm/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
@@ -86,31 +86,23 @@
 	vga-dac {
 		compatible = "dumb-vga-dac";
 		vdd-supply = <&reg_vga_3v3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 
-				vga_dac_in: endpoint@0 {
-					reg = <0>;
+				vga_dac_in: endpoint {
 					remote-endpoint = <&tcon0_out_vga>;
 				};
 			};
 
 			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <1>;
 
-				vga_dac_out: endpoint@0 {
-					reg = <0>;
+				vga_dac_out: endpoint {
 					remote-endpoint = <&vga_con_in>;
 				};
 			};
@@ -160,17 +152,10 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -184,21 +169,15 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	/* pull-ups and devices require AXP221 DLDO3 */
 	status = "failed";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	pcf8563: rtc@51 {
@@ -209,27 +188,27 @@
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	/* external pull-ups missing for some pins */
-	bias-pull-up;
-};
-
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -241,31 +220,13 @@
 	status = "okay";
 };
 
-&pio {
-	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
-		pins = "PA21";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
-		pins = "PG10";
-		function = "gpio_out";
-	};
-};
-
 &p2wi {
 	status = "okay";
 
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
@@ -354,7 +315,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
@@ -368,8 +329,8 @@
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
-	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun6i-a31-i7.dts b/arch/arm/dts/sun6i-a31-i7.dts
index d659be9..744723d 100644
--- a/arch/arm/dts/sun6i-a31-i7.dts
+++ b/arch/arm/dts/sun6i-a31-i7.dts
@@ -71,10 +71,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_i7>;
 
-		blue {
+		led {
 			label = "i7:blue:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
@@ -118,14 +116,10 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -140,48 +134,31 @@
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
 	status = "okay";
 };
 
-&pio {
-	led_pins_i7: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_i7>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_pins_a>;
-	spdif-out = "okay";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
@@ -191,7 +168,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts
index 9698f6d..e4f3415 100644
--- a/arch/arm/dts/sun6i-a31-m9.dts
+++ b/arch/arm/dts/sun6i-a31-m9.dts
@@ -60,10 +60,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m9>;
 
-		blue {
+		led {
 			label = "m9:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -85,26 +83,26 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
+};
 
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
-	status = "okay";
-};
-
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -117,31 +115,13 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 #include "axp22x.dtsi"
 
-&pio {
-	led_pins_m9: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
-
 &reg_aldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -215,15 +195,13 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_m9>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
index bb14b17..7bd4bdd 100644
--- a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -60,10 +60,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m9>;
 
-		blue {
+		led {
 			label = "a1000g:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -85,26 +83,26 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
+};
 
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
-	status = "okay";
-};
-
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -117,31 +115,13 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 #include "axp22x.dtsi"
 
-&pio {
-	led_pins_m9: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
-
 &reg_aldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -215,15 +195,13 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_m9>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31-mixtile-loftq.dts b/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
index 32ab975..dde9bdf 100644
--- a/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
+++ b/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
@@ -31,11 +31,13 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
+};
 
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
@@ -51,6 +53,6 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
index c729925..d7d920e 100644
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
@@ -42,8 +42,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -52,6 +50,8 @@
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		ethernet0 = &gmac;
@@ -62,7 +62,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		simplefb_hdmi: framebuffer@0 {
+		simplefb_hdmi: framebuffer-lcd0-hdmi {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -73,7 +73,7 @@
 			status = "disabled";
 		};
 
-		simplefb_lcd: framebuffer@1 {
+		simplefb_lcd: framebuffer-lcd0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -105,37 +105,63 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
 		};
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -144,7 +170,10 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
@@ -166,12 +195,8 @@
 		};
 	};
 
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
 	pmu {
-		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
@@ -183,17 +208,20 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M {
+		osc24M: clk-24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
 		};
 
-		osc32k: clk@0 {
+		osc32k: clk-32k {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
 		};
 
 		/*
@@ -205,14 +233,14 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: clk@1 {
+		mii_phy_tx_clk: clk-mii-phy-tx {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: clk@2 {
+		gmac_int_tx_clk: clk-gmac-int-tx {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;
@@ -234,7 +262,7 @@
 		status = "disabled";
 	};
 
-	soc@1c00000 {
+	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -253,15 +281,21 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD0>;
-			reset-names = "lcd";
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			clocks = <&ccu CLK_AHB1_LCD0>,
 				 <&ccu CLK_LCD0_CH0>,
-				 <&ccu CLK_LCD0_CH1>;
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
 
 			ports {
 				#address-cells = <1>;
@@ -301,15 +335,20 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD1>;
-			reset-names = "lcd";
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB1_LCD1>,
 				 <&ccu CLK_LCD1_CH0>,
-				 <&ccu CLK_LCD1_CH1>;
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
 
 			ports {
 				#address-cells = <1>;
@@ -359,6 +398,8 @@
 			resets = <&ccu RST_AHB1_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -378,6 +419,8 @@
 			resets = <&ccu RST_AHB1_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -431,7 +474,6 @@
 				 <&ccu CLK_PLL_VIDEO1_2X>;
 			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
 			resets = <&ccu RST_AHB1_HDMI>;
-			reset-names = "ahb";
 			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
 			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
 			status = "disabled";
@@ -457,8 +499,6 @@
 				};
 
 				hdmi_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 				};
 			};
@@ -474,6 +514,7 @@
 			phys = <&usbphy 0>;
 			phy-names = "usb";
 			extcon = <&usbphy 0>;
+			dr_mode = "otg";
 			status = "disabled";
 		};
 
@@ -557,7 +598,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&osc32k>;
+			clocks = <&osc24M>, <&rtc 0>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -570,14 +611,14 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			gmac_pins_gmii_a: gmac_gmii@0 {
+			gmac_gmii_pins: gmac-gmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 						"PA4", "PA5", "PA6", "PA7",
 						"PA8", "PA9", "PA10", "PA11",
@@ -593,7 +634,7 @@
 				drive-strength = <30>;
 			};
 
-			gmac_pins_mii_a: gmac_mii@0 {
+			gmac_mii_pins: gmac-mii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 						"PA8", "PA9", "PA11",
 						"PA12", "PA13", "PA14", "PA19",
@@ -602,7 +643,7 @@
 				function = "gmac";
 			};
 
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
+			gmac_rgmii_pins: gmac-rgmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 						"PA9", "PA10", "PA11",
 						"PA12", "PA13", "PA14", "PA19",
@@ -615,22 +656,22 @@
 				drive-strength = <40>;
 			};
 
-			i2c0_pins_a: i2c0@0 {
+			i2c0_pins: i2c0-pins {
 				pins = "PH14", "PH15";
 				function = "i2c0";
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins: i2c1-pins {
 				pins = "PH16", "PH17";
 				function = "i2c1";
 			};
 
-			i2c2_pins_a: i2c2@0 {
+			i2c2_pins: i2c2-pins {
 				pins = "PH18", "PH19";
 				function = "i2c2";
 			};
 
-			lcd0_rgb888_pins: lcd0_rgb888 {
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
 				pins = "PD0", "PD1", "PD2", "PD3",
 						 "PD4", "PD5", "PD6", "PD7",
 						 "PD8", "PD9", "PD10", "PD11",
@@ -641,7 +682,7 @@
 				function = "lcd0";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
 				function = "mmc0";
@@ -649,7 +690,7 @@
 				bias-pull-up;
 			};
 
-			mmc1_pins_a: mmc1@0 {
+			mmc1_pins: mmc1-pins {
 				pins = "PG0", "PG1", "PG2", "PG3",
 						 "PG4", "PG5";
 				function = "mmc1";
@@ -657,7 +698,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_pins_a: mmc2@0 {
+			mmc2_4bit_pins: mmc2-4bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11";
 				function = "mmc2";
@@ -665,7 +706,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_8bit_emmc_pins: mmc2@1 {
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
 						 "PC13", "PC14", "PC15",
@@ -675,7 +716,7 @@
 				bias-pull-up;
 			};
 
-			mmc3_8bit_emmc_pins: mmc3@1 {
+			mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
 						 "PC13", "PC14", "PC15",
@@ -685,12 +726,12 @@
 				bias-pull-up;
 			};
 
-			spdif_pins_a: spdif@0 {
+			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH28";
 				function = "spdif";
 			};
 
-			uart0_pins_a: uart0@0 {
+			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH20", "PH21";
 				function = "uart0";
 			};
@@ -703,13 +744,16 @@
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};
 
 		wdt1: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		spdif: spdif@1c21000 {
@@ -849,6 +893,8 @@
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_APB2_I2C0>;
 			resets = <&ccu RST_APB2_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -860,6 +906,8 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_APB2_I2C1>;
 			resets = <&ccu RST_APB2_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -871,6 +919,8 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_APB2_I2C2>;
 			resets = <&ccu RST_APB2_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -900,8 +950,12 @@
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		crypto: crypto-engine@1c15000 {
@@ -950,6 +1004,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi1: spi@1c69000 {
@@ -962,6 +1018,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi2: spi@1c6a000 {
@@ -974,6 +1032,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi3: spi@1c6b000 {
@@ -986,10 +1046,12 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gic: interrupt-controller@1c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
@@ -1073,9 +1135,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_BE1>;
 
-			assigned-clocks = <&ccu CLK_BE1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1119,9 +1178,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC1>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1165,9 +1221,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_BE0>;
 
-			assigned-clocks = <&ccu CLK_BE0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1189,12 +1242,9 @@
 				};
 
 				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					be0_out_drc0: endpoint@0 {
-						reg = <0>;
+					be0_out_drc0: endpoint {
 						remote-endpoint = <&drc0_in_be0>;
 					};
 				};
@@ -1211,20 +1261,14 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC0>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				drc0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					drc0_in_be0: endpoint@0 {
-						reg = <0>;
+					drc0_in_be0: endpoint {
 						remote-endpoint = <&be0_out_drc0>;
 					};
 				};
@@ -1248,13 +1292,16 @@
 		};
 
 		rtc: rtc@1f00000 {
+			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k";
 		};
 
-		nmi_intc: interrupt-controller@1f00c00 {
+		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1269,7 +1316,7 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>,
+				clocks = <&rtc 0>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
@@ -1304,7 +1351,7 @@
 			ir_clk: ir_clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&osc32k>, <&osc24M>;
+				clocks = <&rtc 0>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
@@ -1320,7 +1367,7 @@
 		};
 
 		ir: ir@1f02000 {
-			compatible = "allwinner,sun5i-a13-ir";
+			compatible = "allwinner,sun6i-a31-ir";
 			clocks = <&apb0_gates 1>, <&ir_clk>;
 			clock-names = "apb", "ir";
 			resets = <&apb0_rst 1>;
@@ -1334,21 +1381,20 @@
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
 			#gpio-cells = <3>;
 
-			ir_pins_a: ir@0 {
+			s_ir_rx_pin: s-ir-rx-pin {
 				pins = "PL4";
 				function = "s_ir";
 			};
 
-			p2wi_pins: p2wi {
+			s_p2wi_pins: s-p2wi-pins {
 				pins = "PL0", "PL1";
 				function = "s_p2wi";
 			};
@@ -1362,7 +1408,7 @@
 			clock-frequency = <100000>;
 			resets = <&apb0_rst 3>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&p2wi_pins>;
+			pinctrl-0 = <&s_p2wi_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts
index 882a4d8..a2ef784 100644
--- a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -53,7 +53,7 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@1000 {
+	button-1000 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
diff --git a/arch/arm/dts/sun6i-a31s-cs908.dts b/arch/arm/dts/sun6i-a31s-cs908.dts
index 75e5781..1d15e15 100644
--- a/arch/arm/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/dts/sun6i-a31s-cs908.dts
@@ -66,28 +66,31 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci1 {
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31s-inet-q972.dts b/arch/arm/dts/sun6i-a31s-inet-q972.dts
index e584e6b..c5e2c55 100644
--- a/arch/arm/dts/sun6i-a31s-inet-q972.dts
+++ b/arch/arm/dts/sun6i-a31s-inet-q972.dts
@@ -54,8 +54,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -73,21 +71,21 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@900 {
+	button-900 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <900000>;
 	};
 
-	button@1200 {
+	button-1200 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts
index 4cb9664..66bc6ca 100644
--- a/arch/arm/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/dts/sun6i-a31s-primo81.dts
@@ -90,19 +90,13 @@
 
 &i2c0 {
 	/* pull-ups and device VDDIO use AXP221 DLDO3 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "failed";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	ctp@5d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&gt911_int_primo81>;
 		compatible = "goodix,gt911";
 		reg = <0x5d>;
 		interrupt-parent = <&pio>;
@@ -112,8 +106,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	accelerometer@1c {
@@ -123,7 +115,6 @@
 		reg = <0x1c>;
 		interrupt-parent = <&pio>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
-		#io-channel-cells = <1>;
 	};
 };
 
@@ -131,14 +122,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@158 {
+	button-158 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <158730>;
 	};
 
-	button@349 {
+	button-349 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -147,8 +138,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
@@ -156,22 +145,11 @@
 };
 
 &pio {
-	gt911_int_primo81: gt911_int_pin@0 {
-		pins = "PA3";
-		function = "gpio_in";
-	};
-
-	mma8452_int_primo81: mma8452_int_pin@0 {
+	mma8452_int_primo81: mma8452-int-pin {
 		pins = "PA9";
 		function = "gpio_in";
 		bias-pull-up;
 	};
-
-	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
 };
 
 &p2wi {
@@ -180,7 +158,7 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
@@ -281,7 +259,7 @@
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_dldo1>;
diff --git a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
index d7325bc..7455c0d 100644
--- a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
@@ -78,7 +78,7 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
@@ -135,7 +135,7 @@
 /* UART0 pads available on core board */
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts
index da0ccf5..0af48e1 100644
--- a/arch/arm/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
@@ -66,8 +66,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_sina31s>;
 
 		status {
 			label = "sina31s:status:usr";
@@ -116,15 +114,11 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -139,7 +133,7 @@
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
@@ -147,14 +141,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@158 {
+	button-158 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <158730>;
 	};
 
-	button@349 {
+	button-349 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -162,9 +156,13 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
@@ -175,19 +173,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pin_sina31s: led_pin@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
-		pins = "PA4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_dldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -196,7 +181,7 @@
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index b8b79c0..efb25b9 100644
--- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -58,20 +58,18 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bpi_m2>;
 
-		blue {
+		led-0 {
 			label = "bpi-m2:blue:usr";
 			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
 		};
 
-		green {
+		led-1 {
 			label = "bpi-m2:green:usr";
 			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
 		};
 
-		red {
+		led-2 {
 			label = "bpi-m2:red:usr";
 			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
 		};
@@ -79,8 +77,6 @@
 
 	mmc2_pwrseq: mmc2_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
 	};
 };
@@ -95,42 +91,38 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_dldo1>;
-	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	bias-pull-up;
-};
-
 &mmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
+	pinctrl-0 = <&mmc2_4bit_pins>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
@@ -146,10 +138,6 @@
 	};
 };
 
-&mmc2_pins_a {
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -160,38 +148,13 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
 };
 
-&pio {
-	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
-		pins = "PA21";
-		function = "gpio_out";
-	};
-
-	led_pins_bpi_m2: led_pins@0 {
-		pins = "PG5", "PG10", "PG11";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
-		pins = "PA4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
-&r_pio {
-	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
-		pins = "PL8";
-		function = "gpio_out";
-	};
-};
-
 #include "axp22x.dtsi"
 
 &reg_aldo1 {
@@ -291,10 +254,81 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
 &usbphy {
 	status = "okay";
 };
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+		"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+		"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+		"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+		"EMDIO", "", "", "", "",
+
+		/* PB */
+		"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+		"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "",
+
+		/* PC */
+		"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+		"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "USB-DRV", "", "", "", "",
+
+		/* PD */
+		"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+		"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+		"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+		"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+		"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+		"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+		/* PE */
+		"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+		"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+		"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+		"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+		"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"",
+
+		/* PG */
+		"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+		"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+		"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+		"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+		"", "", "", "", "", "", "", "", "",
+
+		/* PH */
+		"", "", "", "", "", "", "", "", "", "CN7-P07",
+		"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+		"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+		"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+		"CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+		"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+		"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "",
+
+		/* PM */
+		"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index aab6c17..cadc452 100644
--- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -62,14 +62,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -89,34 +85,20 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	bias-pull-up;
-};
-
 &p2wi {
 	status = "okay";
 
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
@@ -189,7 +171,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/dts/sun6i-reference-design-tablet.dtsi
index 4e72e4f..6bf3fbd 100644
--- a/arch/arm/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/dts/sun6i-reference-design-tablet.dtsi
@@ -66,34 +66,20 @@
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PA15";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &p2wi {
 	status = "okay";
 
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
@@ -179,9 +165,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_dldo1>;
diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
index 44f3cad..a42fac6 100644
--- a/arch/arm/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -42,8 +42,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
@@ -51,13 +49,15 @@
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		simplefb_lcd: framebuffer@0 {
+		simplefb_lcd: framebuffer-lcd0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -68,6 +68,12 @@
 		};
 	};
 
+	de: display-engine {
+		/* compatible gets set in SoC specific dtsi file */
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -118,12 +124,34 @@
 		};
 	};
 
-	soc@1c00000 {
+	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-a23-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-a23-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
 		dma: dma-controller@1c02000 {
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
@@ -133,6 +161,60 @@
 			#dma-cells = <1>;
 		};
 
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun8i-a23-nand-controller";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			dmas = <&dma 5>;
+			dma-names = "rxtx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "lvds-alt";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -147,6 +229,8 @@
 			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -190,21 +274,6 @@
 			#size-cells = <0>;
 		};
 
-		nfc: nand@1c03000 {
-			compatible = "allwinner,sun4i-a10-nand";
-			reg = <0x01c03000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_NAND>;
-			reset-names = "ahb";
-			pinctrl-names = "default";
-			pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
 		usb_otg: usb@1c19000 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c19000 0x0400>;
@@ -215,6 +284,7 @@
 			phys = <&usbphy 0>;
 			phy-names = "usb";
 			extcon = <&usbphy 0>;
+			dr_mode = "otg";
 			status = "disabled";
 		};
 
@@ -276,22 +346,30 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			uart0_pins_a: uart0@0 {
-				pins = "PF2", "PF4";
-				function = "uart0";
+			i2c0_pins: i2c0-pins {
+				pins = "PH2", "PH3";
+				function = "i2c0";
 			};
 
-			uart1_pins_a: uart1@0 {
-				pins = "PG6", "PG7";
-				function = "uart1";
+			i2c1_pins: i2c1-pins {
+				pins = "PH4", "PH5";
+				function = "i2c1";
 			};
 
-			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
-				pins = "PG8", "PG9";
-				function = "uart1";
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
@@ -299,7 +377,7 @@
 				bias-pull-up;
 			};
 
-			mmc1_pins_a: mmc1@0 {
+			mmc1_pg_pins: mmc1-pg-pins {
 				pins = "PG0", "PG1", "PG2",
 				       "PG3", "PG4", "PG5";
 				function = "mmc1";
@@ -307,7 +385,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_8bit_pins: mmc2_8bit {
+			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC5", "PC6", "PC8",
 				       "PC9", "PC10", "PC11",
 				       "PC12", "PC13", "PC14",
@@ -324,61 +402,53 @@
 				function = "nand0";
 			};
 
-			nand_pins_cs0: nand-pins-cs0 {
+			nand_cs0_pin: nand-cs0-pin {
 				pins = "PC4";
 				function = "nand0";
 				bias-pull-up;
 			};
 
-			nand_pins_cs1: nand-pins-cs1 {
+			nand_cs1_pin: nand-cs1-pin {
 				pins = "PC3";
 				function = "nand0";
 				bias-pull-up;
 			};
 
-			nand_pins_rb0: nand-pins-rb0 {
+			nand_rb0_pin: nand-rb0-pin {
 				pins = "PC6";
 				function = "nand0";
 				bias-pull-up;
 			};
 
-			nand_pins_rb1: nand-pins-rb1 {
+			nand_rb1_pin: nand-rb1-pin {
 				pins = "PC7";
 				function = "nand0";
 				bias-pull-up;
 			};
 
-			pwm0_pins: pwm0 {
+			pwm0_pin: pwm0-pin {
 				pins = "PH0";
 				function = "pwm0";
 			};
 
-			i2c0_pins_a: i2c0@0 {
-				pins = "PH2", "PH3";
-				function = "i2c0";
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
 			};
 
-			i2c1_pins_a: i2c1@0 {
-				pins = "PH4", "PH5";
-				function = "i2c1";
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
 			};
 
-			i2c2_pins_a: i2c2@0 {
-				pins = "PE12", "PE13";
-				function = "i2c2";
-			};
-
-			lcd_rgb666_pins: lcd-rgb666@0 {
-				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
-				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
-				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
-				       "PD24", "PD25", "PD26", "PD27";
-				function = "lcd0";
+			uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
 			};
 		};
 
 		timer@1c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
+			compatible = "allwinner,sun8i-a23-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -389,6 +459,7 @@
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		pwm: pwm@1c21400 {
@@ -477,6 +548,8 @@
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C0>;
 			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -488,6 +561,8 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
 			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -499,6 +574,8 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -532,7 +609,7 @@
 		};
 
 		gic: interrupt-controller@1c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
@@ -542,17 +619,104 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		fe0: display-frontend@1e00000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_BE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
 		rtc: rtc@1f00000 {
-			compatible = "allwinner,sun6i-a31-rtc";
-			reg = <0x01f00000 0x54>;
+			compatible = "allwinner,sun8i-a23-rtc";
+			reg = <0x01f00000 0x400>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			clock-output-names = "osc32k";
+			clock-output-names = "osc32k", "osc32k-out";
 			clocks = <&ext_osc32k>;
 			#clock-cells = <1>;
 		};
 
-		nmi_intc: interrupt-controller@1f00c00 {
+		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -624,6 +788,20 @@
 			status = "disabled";
 		};
 
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun8i-a23-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&apb0_gates 6>;
+			resets = <&apb0_rst 6>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -634,18 +812,22 @@
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#gpio-cells = <3>;
 
-			r_rsb_pins: r_rsb {
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+				bias-pull-up;
+			};
+
+			r_rsb_pins: r-rsb-pins {
 				pins = "PL0", "PL1";
 				function = "s_rsb";
 				drive-strength = <20>;
 				bias-pull-up;
 			};
 
-			r_uart_pins_a: r_uart@0 {
+			r_uart_pins_a: r-uart-pins {
 				pins = "PL2", "PL3";
 				function = "s_uart";
 			};
diff --git a/arch/arm/dts/sun8i-a23-evb.dts b/arch/arm/dts/sun8i-a23-evb.dts
index 8a93697..53fb1be 100644
--- a/arch/arm/dts/sun8i-a23-evb.dts
+++ b/arch/arm/dts/sun8i-a23-evb.dts
@@ -65,14 +65,10 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
@@ -80,21 +76,21 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@190 {
+	button-190 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@390 {
+	button-390 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <390000>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Home";
 		linux,code = <KEY_HOME>;
 		channel = <0>;
@@ -103,22 +99,12 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_evb: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 /*
  * The RX line has a non-populated resistance. In order to use it, you
  * need to solder R207 on the back of the board in order to close the
diff --git a/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
index e3c7a25..bcbc9b0 100644
--- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
@@ -63,7 +63,7 @@
 };
 
 &lradc {
-	button@600 {
+	button-600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
similarity index 77%
copy from arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
copy to arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
index e559020..51097c7 100644
--- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
+++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -41,35 +41,33 @@
  */
 
 /dts-v1/;
-#include "sun8i-a33.dtsi"
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
 
 / {
-	model = "Nintendo NES Classic Edition";
-	compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+&codec {
+	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"Speaker", "HP",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",  "MBIAS",
+		"Headset Mic", "HBIAS";
 	status = "okay";
 };
 
-&nfc {
-	status = "okay";
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
 
-	nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		allwinner,rb = <0>;
-		nand-ecc-mode = "hw";
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
 	};
 };
diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
similarity index 77%
copy from arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
copy to arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
index e559020..51097c7 100644
--- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
+++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -41,35 +41,33 @@
  */
 
 /dts-v1/;
-#include "sun8i-a33.dtsi"
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
 
 / {
-	model = "Nintendo NES Classic Edition";
-	compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+&codec {
+	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"Speaker", "HP",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",  "MBIAS",
+		"Headset Mic", "HBIAS";
 	status = "okay";
 };
 
-&nfc {
-	status = "okay";
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
 
-	nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		allwinner,rb = <0>;
-		nand-ecc-mode = "hw";
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
 	};
 };
diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index 649e313..d5f6aeb 100644
--- a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -54,8 +54,6 @@
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -71,7 +69,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -85,17 +83,6 @@
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
-&r_pio {
-	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl1680";
diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
index 6b3bcae..9f9232a 100644
--- a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -54,8 +54,6 @@
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -64,7 +62,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -78,17 +76,6 @@
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
-&r_pio {
-	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl3670";
diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sun8i-a23-q8-tablet.dts
index b6958e8..51097c7 100644
--- a/arch/arm/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/dts/sun8i-a23-q8-tablet.dts
@@ -61,3 +61,13 @@
 		"Headset Mic", "HBIAS";
 	status = "okay";
 };
+
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/dts/sun8i-a23.dtsi b/arch/arm/dts/sun8i-a23.dtsi
index 58e6585..a5e884a 100644
--- a/arch/arm/dts/sun8i-a23.dtsi
+++ b/arch/arm/dts/sun8i-a23.dtsi
@@ -45,11 +45,7 @@
 #include "sun8i-a23-a33.dtsi"
 
 / {
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	soc@1c00000 {
+	soc {
 		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-a23-codec";
@@ -66,10 +62,26 @@
 	};
 };
 
+&be0 {
+	compatible = "allwinner,sun8i-a23-display-backend";
+};
+
 &ccu {
 	compatible = "allwinner,sun8i-a23-ccu";
 };
 
+&de {
+	compatible = "allwinner,sun8i-a23-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a23-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a23-display-frontend";
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a23-pinctrl";
 	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -77,6 +89,10 @@
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&tcon0 {
+	compatible = "allwinner,sun8i-a23-tcon";
+};
+
 &usb_otg {
 	compatible = "allwinner,sun6i-a31-musb";
 };
diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts
similarity index 80%
rename from arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
rename to arch/arm/dts/sun8i-a33-et-q8-v1.6.dts
index e559020..9c5750c 100644
--- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
+++ b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,34 +42,16 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
 
 / {
-	model = "Nintendo NES Classic Edition";
-	compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&nfc {
-	status = "okay";
-
-	nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
 		reg = <0>;
-		allwinner,rb = <0>;
-		nand-ecc-mode = "hw";
+		remote-endpoint = <&panel_input>;
 	};
 };
diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
index f711599..2dfdd0a 100644
--- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
@@ -69,7 +69,7 @@
 };
 
 &lradc {
-	button@600 {
+	button-600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
@@ -79,7 +79,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	bus-width = <4>;
 	non-removable;
diff --git a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
index 3e05959..065cb62 100644
--- a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
@@ -63,20 +63,16 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_d978>;
 
-		home {
+		led {
 			label = "d978:blue:home";
 			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 		};
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	bus-width = <4>;
 	non-removable;
@@ -88,7 +84,7 @@
 };
 
 &r_pio {
-	led_pin_d978: led_pin_d978@0 {
+	led_pin_d978: led-pin {
 		pins = "PL5";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -101,7 +97,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>,
-		    <&uart1_pins_cts_rts_a>;
+	pinctrl-0 = <&uart1_pg_pins>,
+		    <&uart1_cts_rts_pg_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts
similarity index 80%
copy from arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
copy to arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts
index e559020..9c5750c 100644
--- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts
+++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,34 +42,16 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
 
 / {
-	model = "Nintendo NES Classic Edition";
-	compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&nfc {
-	status = "okay";
-
-	nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
 		reg = <0>;
-		allwinner,rb = <0>;
-		nand-ecc-mode = "hw";
+		remote-endpoint = <&panel_input>;
 	};
 };
diff --git a/arch/arm/dts/sun8i-a33-olinuxino.dts b/arch/arm/dts/sun8i-a33-olinuxino.dts
index a1a1eb6..8538514 100644
--- a/arch/arm/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/dts/sun8i-a33-olinuxino.dts
@@ -62,7 +62,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "a33-olinuxino:green:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -82,8 +82,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -100,7 +98,7 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
@@ -196,8 +194,8 @@
 				    "Headphone", "Headphone Jack";
 	/* Board level routing. First 2 routes copied from SoC level */
 	simple-audio-card,routing =
-		"Left DAC", "AIF1 Slot 0 Left",
-		"Right DAC", "AIF1 Slot 0 Right",
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
 		"HP", "HPCOM",
 		"Headphone Jack", "HP",
 		"MIC1", "Microphone Jack",
@@ -207,7 +205,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts
index b0bc236..9c5750c 100644
--- a/arch/arm/dts/sun8i-a33-q8-tablet.dts
+++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts
@@ -48,3 +48,10 @@
 	model = "Q8 A33 Tablet";
 	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
index 541acb4..d54a067 100644
--- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
@@ -63,16 +63,10 @@
 
 	panel {
 		compatible = "netron-dy,e231732";
-		#address-cells = <1>;
-		#size-cells = <0>;
+		power-supply = <&reg_vcc3v3>;
 
-		port@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_panel>;
 			};
 		};
@@ -117,21 +111,21 @@
 	vref-supply = <&reg_dcdc1>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191011>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <391304>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Home";
 		linux,code = <KEY_HOME>;
 		channel = <0>;
@@ -140,8 +134,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -161,29 +153,19 @@
 &mmc2_8bit_pins {
 	/* Increase drive strength for DDR modes */
 	drive-strength = <40>;
-	/* eMMC is missing pull-ups */
-	bias-pull-up;
 };
 
 &ohci0 {
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 	};
@@ -278,7 +260,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi
index 8d278ee..b3d1bdf 100644
--- a/arch/arm/dts/sun8i-a33.dtsi
+++ b/arch/arm/dts/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -131,37 +131,40 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 	};
 
-	de: display-engine {
-		compatible = "allwinner,sun8i-a33-display-engine";
-		allwinner,pipelines = <&fe0>;
-		status = "disabled";
-	};
-
 	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
@@ -177,21 +180,17 @@
 		};
 	};
 
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
 	sound: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sun8i-a33-audio";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&link_codec>;
 		simple-audio-card,bitclock-master = <&link_codec>;
-		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,mclk-fs = <128>;
 		simple-audio-card,aux-devs = <&codec_analog>;
 		simple-audio-card,routing =
-			"Left DAC", "AIF1 Slot 0 Left",
-			"Right DAC", "AIF1 Slot 0 Right";
+			"Left DAC", "DACL",
+			"Right DAC", "DACR";
 		status = "disabled";
 
 		simple-audio-card,cpu {
@@ -199,54 +198,24 @@
 		};
 
 		link_codec: simple-audio-card,codec {
-			sound-dai = <&codec>;
+			sound-dai = <&codec 0>;
 		};
 	};
 
-	soc@1c00000 {
-		tcon0: lcd-controller@1c0c000 {
-			compatible = "allwinner,sun8i-a33-tcon";
-			reg = <0x01c0c000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_LCD>,
-				 <&ccu CLK_LCD_CH0>;
-			clock-names = "ahb",
-				      "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
-			resets = <&ccu RST_BUS_LCD>;
-			reset-names = "lcd";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				tcon0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					tcon0_in_drc0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&drc0_out_tcon0>;
-					};
-				};
-
-				tcon0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					tcon0_out_dsi: endpoint@1 {
-						reg = <1>;
-						remote-endpoint = <&dsi_in_tcon0>;
-					};
-				};
-			};
+	soc {
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-a33-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
 		};
 
 		crypto: crypto-engine@1c15000 {
-			compatible = "allwinner,sun4i-a10-crypto";
+			compatible = "allwinner,sun8i-a33-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
@@ -269,7 +238,7 @@
 		};
 
 		codec: codec@1c22e00 {
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			compatible = "allwinner,sun8i-a33-codec";
 			reg = <0x01c22e00 0x400>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -296,19 +265,12 @@
 			phys = <&dphy>;
 			phy-names = "dphy";
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					dsi_in_tcon0: endpoint {
-						remote-endpoint = <&tcon0_out_dsi>;
-					};
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
 				};
 			};
 		};
@@ -323,119 +285,10 @@
 			status = "disabled";
 			#phy-cells = <0>;
 		};
-
-		fe0: display-frontend@1e00000 {
-			compatible = "allwinner,sun8i-a33-display-frontend";
-			reg = <0x01e00000 0x20000>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
-				 <&ccu CLK_DRAM_DE_FE>;
-			clock-names = "ahb", "mod",
-				      "ram";
-			resets = <&ccu RST_BUS_DE_FE>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fe0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					fe0_out_be0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&be0_in_fe0>;
-					};
-				};
-			};
-		};
-
-		be0: display-backend@1e60000 {
-			compatible = "allwinner,sun8i-a33-display-backend";
-			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
-			reg-names = "be", "sat";
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
-				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
-			clock-names = "ahb", "mod",
-				      "ram", "sat";
-			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
-			reset-names = "be", "sat";
-			assigned-clocks = <&ccu CLK_DE_BE>;
-			assigned-clock-rates = <300000000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				be0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					be0_in_fe0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&fe0_out_be0>;
-					};
-				};
-
-				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					be0_out_drc0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&drc0_in_be0>;
-					};
-				};
-			};
-		};
-
-		drc0: drc@1e70000 {
-			compatible = "allwinner,sun8i-a33-drc";
-			reg = <0x01e70000 0x10000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
-				 <&ccu CLK_DRAM_DRC>;
-			clock-names = "ahb", "mod", "ram";
-			resets = <&ccu RST_BUS_DRC>;
-
-			assigned-clocks = <&ccu CLK_DRC>;
-			assigned-clock-rates = <300000000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				drc0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					drc0_in_be0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&be0_out_drc0>;
-					};
-				};
-
-				drc0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					drc0_out_tcon0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&tcon0_in_drc0>;
-					};
-				};
-			};
-		};
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -444,11 +297,17 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu_alert1>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map2 {
@@ -502,10 +361,35 @@
 	};
 };
 
+&be0 {
+	compatible = "allwinner,sun8i-a33-display-backend";
+	/* A33 has an extra "SAT" module packed inside the display backend */
+	reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+	reg-names = "be", "sat";
+	clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+		 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+	clock-names = "ahb", "mod",
+		      "ram", "sat";
+	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+	reset-names = "be", "sat";
+};
+
 &ccu {
 	compatible = "allwinner,sun8i-a33-ccu";
 };
 
+&de {
+	compatible = "allwinner,sun8i-a33-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a33-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a33-display-frontend";
+};
+
 &mali {
 	operating-points-v2 = <&mali_opp_table>;
 };
@@ -515,13 +399,27 @@
 	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 
-	uart0_pins_b: uart0@1 {
+	uart0_pb_pins: uart0-pb-pins {
 		pins = "PB0", "PB1";
 		function = "uart0";
 	};
 
 };
 
+&tcon0 {
+	compatible = "allwinner,sun8i-a33-tcon";
+};
+
+&tcon0_out {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	tcon0_out_dsi: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&dsi_in_tcon0>;
+	};
+};
+
 &usb_otg {
 	compatible = "allwinner,sun8i-a33-musb";
 };
diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi
index c676940..3d9a152 100644
--- a/arch/arm/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/dts/sun8i-q8-common.dtsi
@@ -49,6 +49,19 @@
 		ethernet0 = &sdio_wifi;
 	};
 
+	panel: panel {
+		/* Tablet dts should provide panel compatible */
+		backlight = <&backlight>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
@@ -64,13 +77,17 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status  = "okay";
 };
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -82,18 +99,20 @@
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
 &r_pio {
-	wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+	wifi_pwrseq_pin_q8: wifi-pwrseq-pins {
 		pins = "PL6", "PL7", "PL11";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
index 0dbdb29..293016d 100644
--- a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
@@ -64,17 +64,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bpi-m2m:blue:usr";
 			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
 		};
 
-		green {
+		led-1 {
 			label = "bpi-m2m:green:usr";
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		red {
+		led-2 {
 			label = "bpi-m2m:red:power";
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -91,6 +91,8 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
 	};
 };
 
@@ -103,13 +105,13 @@
 };
 
 &cpu0_opp_table {
-	opp@1104000000 {
+	opp-1104000000 {
 		opp-hz = /bits/ 64 <1104000000>;
 		opp-microvolt = <1320000>;
 		clock-latency-ns = <244144>; /* 8 32k periods */
 	};
 
-	opp@1200000000 {
+	opp-1200000000 {
 		opp-hz = /bits/ 64 <1200000000>;
 		opp-microvolt = <1320000>;
 		clock-latency-ns = <244144>; /* 8 32k periods */
@@ -124,30 +126,7 @@
 	status = "okay";
 };
 
-/* This is the i2c bus exposed on the DSI connector for the touch panel */
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "disabled";
-};
-
-/* This is the i2c bus exposed on the GPIO header */
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "disabled";
-};
-
-/* This is the i2c bus exposed on the CSI connector to control the sensor */
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	status = "disabled";
-};
-
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
@@ -156,7 +135,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -184,7 +163,7 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
@@ -292,14 +271,26 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>;
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_aldo3>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
 };
 
 &usb_otg {
diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 0000000..246dec5
--- /dev/null
+++ b/arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	/*
+	 * UART0 is available on two ports: PB and PF, both are accessible.
+	 * PF can also be used for the SD card so PB is preferred.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pf_pins>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	/* 2Gb Macronix MX30LF2G18AC (3V) */
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	/* VBUS is always on because it is wired to the power supply */
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 0000000..80761d7
--- /dev/null
+++ b/arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+	model = "Nintendo SuperNES Classic Edition";
+	compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+		     "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/dts/sun8i-r16-parrot.dts b/arch/arm/dts/sun8i-r16-parrot.dts
index 472c03b..2be1b76 100644
--- a/arch/arm/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/dts/sun8i-r16-parrot.dts
@@ -63,17 +63,15 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_parrot>;
 
-		led1 {
+		led-1 {
 			label = "parrot:led1:usr";
-			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		};
 
-		led2 {
+		led-2 {
 			label = "parrot:led2:usr";
-			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+			gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
 		};
 	};
 
@@ -97,8 +95,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	/*
@@ -111,14 +107,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@0 {
+	button-190 {
 		label = "V+";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@1 {
+	button-390 {
 		label = "V-";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -128,8 +124,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
 	vmmc-supply = <&reg_dcdc1>;
 	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
 	bus-width = <4>;
@@ -138,7 +132,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -158,51 +152,19 @@
 
 &mmc2_8bit_pins {
 	drive-strength = <40>;
-	bias-pull-up;
 };
 
 &ohci0 {
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
-		pins = "PD14";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_parrot: led_pins@0 {
-		pins = "PE16", "PE17";
-		function = "gpio_out";
-	};
-
-	usb0_id_det: usb0_id_detect_pin@0 {
-		pins = "PD10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
-		pins = "PD12";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	wifi_reset_pin_parrot: wifi_reset_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
@@ -319,8 +281,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_parrot>;
 	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
 	status = "okay";
 };
@@ -331,7 +291,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -346,10 +306,8 @@
 
 &usbphy {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_det>;
 	usb0_vbus-supply = <&reg_drivevbus>;
-	usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+	usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 };
diff --git a/arch/arm/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/dts/sun8i-reference-design-tablet.dtsi
index 880096c..797d61c 100644
--- a/arch/arm/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/dts/sun8i-reference-design-tablet.dtsi
@@ -54,6 +54,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		power-supply = <&reg_dc1sw>;
 	};
 
 	chosen {
@@ -69,11 +70,10 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen@0 {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_power_pin>;
 		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 		/* Tablet dts must provide reg and compatible */
 		status = "disabled";
@@ -81,40 +81,19 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	ts_power_pin: ts_power_pin@0 {
-		pins = "PH1";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		drivevbus-supply = <&reg_vcc5v0>;
@@ -238,9 +217,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	status = "okay";
diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi
index f1953b0..d8e5826 100644
--- a/arch/arm/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/dts/sunxi-common-regulators.dtsi
@@ -43,43 +43,10 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-&pio {
-	ahci_pwr_pin_a: ahci_pwr_pin@0 {
-		allwinner,pins = "PB8";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		allwinner,pins = "PB9";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	usb1_vbus_pin_a: usb1_vbus_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	usb2_vbus_pin_a: usb2_vbus_pin@0 {
-		allwinner,pins = "PH3";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
 
 / {
 	reg_ahci_5v: ahci-5v {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ahci_pwr_pin_a>;
 		regulator-name = "ahci-5v";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -91,8 +58,6 @@
 
 	reg_usb0_vbus: usb0-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb0_vbus_pin_a>;
 		regulator-name = "usb0-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -103,8 +68,6 @@
 
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_a>;
 		regulator-name = "usb1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -116,8 +79,6 @@
 
 	reg_usb2_vbus: usb2-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_a>;
 		regulator-name = "usb2-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/dts/sunxi-reference-design-tablet.dtsi
index b824146..117198c 100644
--- a/arch/arm/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/dts/sunxi-reference-design-tablet.dtsi
@@ -42,18 +42,17 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include "sunxi-common-regulators.dtsi"
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 };
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
@@ -61,14 +60,14 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -78,6 +77,6 @@
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 1f43b25..5fc9b29 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -911,7 +911,7 @@
 config VIDEO_LCD_PANEL_I2C_NAME
 	string "LCD panel i2c interface node name"
 	depends on VIDEO_LCD_PANEL_I2C
-	default "i2c@0"
+	default "i2c"
 	---help---
 	Set the device tree node name for the LCD i2c interface.
 
diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig
index 72e9725..b660234 100644
--- a/configs/Nintendo_NES_Classic_Edition_defconfig
+++ b/configs/Nintendo_NES_Classic_Edition_defconfig
@@ -1,6 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic-edition"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic"
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=600