ARM: rmobile: Sort R-Car Gen3 Kconfig lists
Sort the 'imply' and 'select' lists in R-Car Gen3 Kconfig options.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
diff --git a/arch/arm/mach-rmobile/Kconfig b/arch/arm/mach-rmobile/Kconfig
index 0e9c0fa..9ff45f4 100644
--- a/arch/arm/mach-rmobile/Kconfig
+++ b/arch/arm/mach-rmobile/Kconfig
@@ -11,19 +11,18 @@
config RCAR_GEN3
bool "Renesas ARM SoCs R-Car Gen3 (64bit)"
select ARM64
- select PHY
select CMD_CACHE
select OF_BOARD_SETUP
- select PINCTRL
+ select PHY
select PINCONF
+ select PINCTRL
select PINCTRL_PFC
select POSITION_INDEPENDENT
select SUPPORT_SPL
imply CMD_FS_UUID
imply CMD_GPT
- imply CMD_UUID
imply CMD_MMC_SWRITE if MMC
- imply SUPPORT_EMMC_RPMB if MMC
+ imply CMD_UUID
imply SPL
imply SPL_BOARD_INIT
imply SPL_GZIP
@@ -32,8 +31,9 @@
imply SPL_SERIAL
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_TINY_MEMSET
- imply SPL_YMODEM_SUPPORT
imply SPL_USE_TINY_PRINTF
+ imply SPL_YMODEM_SUPPORT
+ imply SUPPORT_EMMC_RPMB if MMC
config RZA1
prompt "Renesas ARM SoCs RZ/A1 (32bit)"
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index 554130b..33fd776 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -87,17 +87,17 @@
config TARGET_BEACON_RZG2M
bool "Beacon EmbeddedWorks RZ/G2 Dev Kit"
+ select PINCTRL_PFC_R8A774A1
+ select PINCTRL_PFC_R8A774B1
+ select PINCTRL_PFC_R8A774E1
select R8A774A1
select R8A774B1
select R8A774E1
select RZ_G2
- select PINCTRL_PFC_R8A774A1
- select PINCTRL_PFC_R8A774B1
- select PINCTRL_PFC_R8A774E1
+ imply CLK_CCF
+ imply CLK_VERSACLOCK
imply MULTI_DTB_FIT
imply MULTI_DTB_FIT_USER_DEFINED_AREA
- imply CLK_VERSACLOCK
- imply CLK_CCF
config TARGET_CONDOR
bool "Condor board"
@@ -131,13 +131,13 @@
config TARGET_HIHOPE_RZG2
bool "HiHope RZ/G2 board"
+ imply MULTI_DTB_FIT
+ imply MULTI_DTB_FIT_USER_DEFINED_AREA
imply R8A774A1
imply R8A774B1
imply R8A774E1
imply RZ_G2
imply SYS_MALLOC_F
- imply MULTI_DTB_FIT
- imply MULTI_DTB_FIT_USER_DEFINED_AREA
help
Support for RZG2 HiHope platform
@@ -150,23 +150,23 @@
config TARGET_SALVATOR_X
bool "Salvator-X board"
+ imply MULTI_DTB_FIT
+ imply MULTI_DTB_FIT_USER_DEFINED_AREA
imply R8A7795
imply R8A7796
imply R8A77965
imply SYS_MALLOC_F
- imply MULTI_DTB_FIT
- imply MULTI_DTB_FIT_USER_DEFINED_AREA
help
Support for Renesas R-Car Gen3 platform
config TARGET_ULCB
bool "ULCB board"
+ imply MULTI_DTB_FIT
+ imply MULTI_DTB_FIT_USER_DEFINED_AREA
imply R8A7795
imply R8A7796
imply R8A77965
imply SYS_MALLOC_F
- imply MULTI_DTB_FIT
- imply MULTI_DTB_FIT_USER_DEFINED_AREA
help
Support for Renesas R-Car Gen3 ULCB platform