diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions
index 44d3478..f4a9968 100644
--- a/doc/I2C_Edge_Conditions
+++ b/doc/I2C_Edge_Conditions
@@ -33,7 +33,7 @@
 This reset edge condition could possibly be present in every I2C
 controller and device available. For boards where a I2C bus reset
 function can be implemented a i2c_init_board() function should be
-provided and enabled by #define'ing CFG_I2C_INIT_BOARD in your
+provided and enabled by #define'ing CONFIG_SYS_I2C_INIT_BOARD in your
 board's config file. Note that this is NOT necessary when using the
 bit-banging I2C driver (common/soft_i2c.c) as this already includes
 the I2C bus reset sequence.
diff --git a/doc/README.JFFS2 b/doc/README.JFFS2
index c5d67fd..f0e9bc1 100644
--- a/doc/README.JFFS2
+++ b/doc/README.JFFS2
@@ -12,7 +12,7 @@
 
 If you boot from a partition which is mounted writable, and you
 update your boot environment by replacing single files on that
-partition, you should also define CFG_JFFS2_SORT_FRAGMENTS. Scanning
+partition, you should also define CONFIG_SYS_JFFS2_SORT_FRAGMENTS. Scanning
 the JFFS2 filesystem takes *much* longer with this feature, though.
 Sorting is done while inserting into the fragment list, which is
 more or less a bubble sort. That algorithm is known to be O(n^2),
@@ -24,16 +24,16 @@
 partition in the code) and you can change where the partition is with
 two defines.
 
-CFG_JFFS2_FIRST_BANK
+CONFIG_SYS_JFFS2_FIRST_BANK
 	defined the first flash bank to use
 
-CFG_JFFS2_FIRST_SECTOR
+CONFIG_SYS_JFFS2_FIRST_SECTOR
 	defines the first sector to use
 
 
-The second way is to define CFG_JFFS_CUSTOM_PART and implement the
+The second way is to define CONFIG_SYS_JFFS_CUSTOM_PART and implement the
 jffs2_part_info(int part_num) function in your board specific files.
-In this mode CFG_JFFS2_FIRST_BANK and CFG_JFFS2_FIRST_SECTOR is not
+In this mode CONFIG_SYS_JFFS2_FIRST_BANK and CONFIG_SYS_JFFS2_FIRST_SECTOR is not
 used.
 
 The input is a partition number starting with 0.
@@ -41,7 +41,7 @@
 
 Ex jffs2_part_info() for one partition.
 ---
-#if defined CFG_JFFS_CUSTOM_PART
+#if defined CONFIG_SYS_JFFS_CUSTOM_PART
 #include <jffs2/jffs2.h>
 
 static struct part_info part;
diff --git a/doc/README.JFFS2_NAND b/doc/README.JFFS2_NAND
index a836d53..2b3326b 100644
--- a/doc/README.JFFS2_NAND
+++ b/doc/README.JFFS2_NAND
@@ -13,7 +13,7 @@
 #define CONFIG_JFFS2_NAND_SIZE 2*1024*1024	/* size of jffs2 partition */
 
 If more than a single partition is desired, the user can define a
-CFG_JFFS_CUSTOM_PART macro and implement a
+CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
 
 	struct part_info* jffs2_part_info(int part_num)
 
diff --git a/doc/README.MBX b/doc/README.MBX
index 679228e..c889fe9 100644
--- a/doc/README.MBX
+++ b/doc/README.MBX
@@ -1,4 +1,4 @@
-IMPORTANT NOTE - read before defining CFG_USE_OSCCLK in your board
+IMPORTANT NOTE - read before defining CONFIG_SYS_USE_OSCCLK in your board
 		 config file!!!
 
 
@@ -62,7 +62,7 @@
 serial ports to do so.
 
 
-You may have a legitimate need to define CFG_USE_OSCCLK if your
+You may have a legitimate need to define CONFIG_SYS_USE_OSCCLK if your
 MBX8xx board is using the OSCM clocking mode.
 
 You better know what you are doing here.
diff --git a/doc/README.MPC866 b/doc/README.MPC866
index c8256a1..4707cb7 100644
--- a/doc/README.MPC866
+++ b/doc/README.MPC866
@@ -4,8 +4,8 @@
 Four compile-time constants are used:
 
 	CONFIG_8xx_OSCLK          - input quartz clock
-	CFG_8xx_CPUCLK_MIN        - minimum allowed CPU clock
-	CFG_8xx_CPUCLK_MAX        - maximum allowed CPU clock
+	CONFIG_SYS_8xx_CPUCLK_MIN        - minimum allowed CPU clock
+	CONFIG_SYS_8xx_CPUCLK_MAX        - maximum allowed CPU clock
 	CONFIG_8xx_CPUCLK_DEFAULT - default CPU clock value
 
 If the "cpuclk" environment variable value is within the CPUCLK_MIN /
diff --git a/doc/README.PIP405 b/doc/README.PIP405
index 07756a5..d8b3f9c 100644
--- a/doc/README.PIP405
+++ b/doc/README.PIP405
@@ -100,9 +100,9 @@
 SCSI support (experimental) only SYM53C8xx supported
 ----------------------------------------------------
 CONFIG_SCSI_SYM53C8XX		type of SCSI controller
-CFG_SCSI_MAX_LUN	8	number of supported LUNs
-CFG_SCSI_MAX_SCSI_ID	7	maximum SCSI ID (0..6)
-CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN
+CONFIG_SYS_SCSI_MAX_LUN	8	number of supported LUNs
+CONFIG_SYS_SCSI_MAX_SCSI_ID	7	maximum SCSI ID (0..6)
+CONFIG_SYS_SCSI_MAX_DEVICE	CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN
 				maximum of Target devices (multiple LUN support
 				for boot)
 
@@ -125,7 +125,7 @@
 
 External peripheral base address:
 ---------------------------------
-CFG_ISA_IO_BASE_ADDRESS		address of all ISA-bus related parts
+CONFIG_SYS_ISA_IO_BASE_ADDRESS		address of all ISA-bus related parts
 				_must_ be defined for ISA-bus parts
 
 Identify:
@@ -135,14 +135,14 @@
 Environment / Console:
 ----------------------
 
-CFG_CONSOLE_IS_IN_ENV		if defined, stdin, stdout and stderr used from
+CONFIG_SYS_CONSOLE_IS_IN_ENV		if defined, stdin, stdout and stderr used from
 				the values stored in the evironment.
 
-CFG_CONSOLE_OVERWRITE_ROUTINE	if defined, console_overwrite() decides if the
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	if defined, console_overwrite() decides if the
 				values stored in the environment or the standard
 				serial in/out put should be assigned to the console.
 
-CFG_CONSOLE_ENV_OVERWRITE	if defined, the start-up console switching
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE	if defined, the start-up console switching
 				are stored in the environment.
 
 PIP405 specific:
@@ -161,7 +161,7 @@
 
 Floppy support:
 ---------------
-Support of a standard floppy disk controller at address CFG_ISA_IO_BASE_ADDRESS
+Support of a standard floppy disk controller at address CONFIG_SYS_ISA_IO_BASE_ADDRESS
 + 0x3F0. Enabled with define CONFIG_CMD_FDC. Reads a unformated floppy disk
 with a image header (see: mkimage). No interrupts and no DMA are used for this.
 Added files:
@@ -173,7 +173,7 @@
 Support for Symbios SYM53C810A chip. Implemented as follows:
 - without disconnect
 - only asynchrounous
-- multiple LUN support (caution, needs a lot of RAM. define CFG_SCSI_MAX_LUN 1 to
+- multiple LUN support (caution, needs a lot of RAM. define CONFIG_SYS_SCSI_MAX_LUN 1 to
   save RAM)
 - multiple SCSI ID support
 - no write support
@@ -197,7 +197,7 @@
 ----------------------------
 Added ATAPI support (with CONFIG_ATAPI) in the file cmd_ide.c.
 To support a hardreset, when the IDE reset pin is not connected to the
-CFG_PC_IDE_RESET pin, the switch CONFIG_IDE_RESET_ROUTINE has been added. When
+CONFIG_SYS_PC_IDE_RESET pin, the switch CONFIG_IDE_RESET_ROUTINE has been added. When
 this switch is enabled the routine void ide_set_reset(int idereset) must be
 within the board specific files.
 Only read from ATAPI devices are supported.
@@ -242,7 +242,7 @@
 MC146818 RTC support:
 ---------------------
 Added support for MC146818 RTC with defining CONFIG_RTC_MC146818. The ISA bus IO
-base address must be defined with CFG_ISA_IO_BASE_ADDRESS.
+base address must be defined with CONFIG_SYS_ISA_IO_BASE_ADDRESS.
 Added files:
 - rtc/mc146818.c
 
@@ -299,7 +299,7 @@
 ----------
 Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
 Added 16bit read/write support for I2C (PPC405), and page write to
-I2C EEPROM if defined CFG_EEPROM_PAGE_WRITE_ENABLE.
+I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
 Changed files:
 - cpu/ppc4xx/i2c.c
 - common/cmd_i2c.c
@@ -308,11 +308,11 @@
 ----------------------
 Although in README.console described, the U-Boot has not assinged the values
 found in the environment to the console. Corrected this behavior, but only if
-CFG_CONSOLE_IS_IN_ENV is defined.
-If CFG_CONSOLE_OVERWRITE_ROUTINE is defined, console_overwrite() decides if the
+CONFIG_SYS_CONSOLE_IS_IN_ENV is defined.
+If CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is defined, console_overwrite() decides if the
 values stored in the environment or the standard serial in/output should be
 assigned to the console. This is useful if the environment values are not correct.
-If CFG_CONSOLE_ENV_OVERWRITE is defined the devices assigned to the console at
+If CONFIG_SYS_CONSOLE_ENV_OVERWRITE is defined the devices assigned to the console at
 start-up time will be written to the environment. This means that if the
 environment values are overwritten by the overwrite_console() routine, they will be
 stored in the environment.
diff --git a/doc/README.PXA_CF b/doc/README.PXA_CF
index e443d39..6a0f236 100644
--- a/doc/README.PXA_CF
+++ b/doc/README.PXA_CF
@@ -12,35 +12,35 @@
 #define CONFIG_PCMCIA_SLOT_A 1
 /* just to keep build system happy  */
 
-#define CFG_PCMCIA_MEM_ADDR     0x28000000
-#define CFG_PCMCIA_MEM_SIZE     0x10000000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR     0x28000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE     0x10000000
 
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00004204
-#define CFG_MCMEM1_VAL		0x00000000
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00000000
-#define CFG_MCIO0_VAL		0x00008407
-#define CFG_MCIO1_VAL		0x00000000
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00004204
+#define CONFIG_SYS_MCMEM1_VAL		0x00000000
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00000000
+#define CONFIG_SYS_MCIO0_VAL		0x00008407
+#define CONFIG_SYS_MCIO1_VAL		0x00000000
 /* memory configuration */
 
-#define CFG_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXBUS		1
 /* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1
+#define CONFIG_SYS_IDE_MAXDEVICE	1
 /* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	0x20000000
+#define CONFIG_SYS_ATA_BASE_ADDR	0x20000000
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x1f0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_REG_OFFSET	0x1f0
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x3f0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x3f0
 
 
 Another important point is that maybe you have to power the pcmcia
diff --git a/doc/README.TQM8260 b/doc/README.TQM8260
index 0571095..b93a1cb 100644
--- a/doc/README.TQM8260
+++ b/doc/README.TQM8260
@@ -52,7 +52,7 @@
 
 	If defined, SMC2 will be used as the console
 
-CFG_INIT_LOCAL_SDRAM
+CONFIG_SYS_INIT_LOCAL_SDRAM
 
 	If defined, the SDRAM on the local bus will be initialized and
 	mapped at BR2.
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
index 5257f18..f9566b8 100644
--- a/doc/README.adnpesc1
+++ b/doc/README.adnpesc1
@@ -78,7 +78,7 @@
 A minimal configuration occupies less than 70 KByte
 (network, SPI, POST and board command support disabled). You
 can save more memory by deactivating the Hu-Shell support and
-long command help (CFG_HUSH_PARSER, CFG_LONGHELP).
+long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
 
 To program U-Boot into the ADNP/ESC1 flash using GERMS do the
 following:
@@ -193,24 +193,24 @@
 	- this is the startup address for autoboot
 	- each Nios application code we want to update will be copied
 	  to this address
-	- default is CFG_ADNPESC1_NIOS_APPL_ENTRY
+	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
 
 3. appl_end_addr
 
 	- Nios application area end address (usually in Flash)
 	- will be used to unprotect/erase the Flash area while updating
-	- default is CFG_ADNPESC1_NIOS_APPL_END
+	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
 
 4. appl_ident_addr
 
 	- address of the Nios application identification string
 	- this is the address checked-up by autoboot
-	- default is CFG_ADNPESC1_NIOS_APPL_IDENT
+	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
 
 5. appl_ident_str
 
 	- the Nios application identification string itself
-	- default is CFG_ADNPESC1_NIOS_IDENTIFIER
+	- default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
 
 6. appl_name
 
@@ -221,13 +221,13 @@
 
 	- optionally file system area start address (usually in Flash)
 	- each file system we want to update will be copied to this address
-	- default is CFG_ADNPESC1_FILESYSTEM_BASE
+	- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
 
 8. fs_end_addr
 
 	- optionally file system area end address (usually in Flash)
 	- will be used to unprotect/erase the Flash area while updating
-	- default is CFG_ADNPESC1_FILESYSTEM_END
+	- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
 
 9. fs_name
 
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
index 145e8cd..e6fb7a4 100644
--- a/doc/README.adnpesc1_base32
+++ b/doc/README.adnpesc1_base32
@@ -18,39 +18,39 @@
 	no Debug Core
 	no On Chip Instrumentation (OCI)
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = (not present)
-			CFG_NIOS_CPU_DCACHE	     = (not present)
-			CFG_NIOS_CPU_REG_NUMS	     = 512
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 512
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 17   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 17
-	 18   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 18
-	 20   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   =
-	      | PIO6	  |  CFG_NIOS_CPU_PIO6_IRQ   = 20
-	 25   | SPI0	  |  CFG_NIOS_CPU_SPI0_IRQ   = 25
-	 31   | PIO7	  |  CFG_NIOS_CPU_PIO7_IRQ   = 31
-	 32   | PIO8	  |  CFG_NIOS_CPU_PIO8_IRQ   = 32
-	 33   | PIO9	  |  CFG_NIOS_CPU_PIO9_IRQ   = 33
-	 34   | PIO10	  |  CFG_NIOS_CPU_PIO10_IRQ  = 34
-	 35   | PIO11	  |  CFG_NIOS_CPU_PIO11_IRQ  = 35
-	 36   | PIO12	  |  CFG_NIOS_CPU_PIO12_IRQ  =
-	      | IDE0	  |  CFG_NIOS_CPU_IDE0_IRQ   = 36
-	 37   | PIO13	  |  CFG_NIOS_CPU_PIO13_IRQ  =
-	      | IDE1	  |  CFG_NIOS_CPU_IDE1_IRQ   = 37
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 17   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 17
+	 18   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 18
+	 20   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   =
+	      | PIO6	  |  CONFIG_SYS_NIOS_CPU_PIO6_IRQ   = 20
+	 25   | SPI0	  |  CONFIG_SYS_NIOS_CPU_SPI0_IRQ   = 25
+	 31   | PIO7	  |  CONFIG_SYS_NIOS_CPU_PIO7_IRQ   = 31
+	 32   | PIO8	  |  CONFIG_SYS_NIOS_CPU_PIO8_IRQ   = 32
+	 33   | PIO9	  |  CONFIG_SYS_NIOS_CPU_PIO9_IRQ   = 33
+	 34   | PIO10	  |  CONFIG_SYS_NIOS_CPU_PIO10_IRQ  = 34
+	 35   | PIO11	  |  CONFIG_SYS_NIOS_CPU_PIO11_IRQ  = 35
+	 36   | PIO12	  |  CONFIG_SYS_NIOS_CPU_PIO12_IRQ  =
+	      | IDE0	  |  CONFIG_SYS_NIOS_CPU_IDE0_IRQ   = 36
+	 37   | PIO13	  |  CONFIG_SYS_NIOS_CPU_PIO13_IRQ  =
+	      | IDE1	  |  CONFIG_SYS_NIOS_CPU_IDE1_IRQ   = 37
 
 MEMORY:	 8 MByte Flash
 	16 MByte SDRAM
 
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
-			CFG_NIOS_CPU_USER_TIMER	     = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = (not present)
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -71,13 +71,13 @@
 	 PIO13| INT7:	    1 input for general purpose irq (IRQ37)
 	      | IDE1INT:     (same) for IDE1 irq input
 
-	U-Boot CFG:	CFG_NIOS_CPU_PORTA_PIO	     = 0
-			CFG_NIOS_CPU_PORTB_PIO	     = 1
-			CFG_NIOS_CPU_PORTC_PIO	     = 2
-			CFG_NIOS_CPU_RCM_PIO	     = 3
-			CFG_NIOS_CPU_WDTENA_PIO	     = 4
-			CFG_NIOS_CPU_WDTTRIG_PIO     = 5
-			CFG_NIOS_CPU_LED_PIO	     = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_PORTA_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_PORTB_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_PORTC_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_RCM_PIO	     = 3
+			CONFIG_SYS_NIOS_CPU_WDTENA_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO     = 5
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = (not present)
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17)
 	UART1: fixed baudrate of 115200, fixed protocol 8N1,
@@ -104,28 +104,28 @@
   0x44000000 ---32-----------16|15------------0-
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT3 (CS4)   :   and content :	       :  > CFG_NIOS_CPU_CS3_SIZE
+  EXT3 (CS4)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS3_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x43000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS3_BASE
+  0x43000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS3_BASE
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT2 (CS3)   :   and content :	       :  > CFG_NIOS_CPU_CS2_SIZE
+  EXT2 (CS3)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS2_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x42000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS2_BASE
+  0x42000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS2_BASE
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT1 (CS2)   :   and content :	       :  > CFG_NIOS_CPU_CS1_SIZE
+  EXT1 (CS2)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS1_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x41000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS1_BASE
+  0x41000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS1_BASE
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT0 (CS1)   :   and content :	       :  > CFG_NIOS_CPU_CS0_SIZE
+  EXT0 (CS1)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS0_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x40000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS0_BASE
+  0x40000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -135,23 +135,23 @@
 	       :			       :
 	       :	      gap	       :
 	       |			       |
-  0x03000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_STACK
+  0x03000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | \
 	       |	       .	       | |  (U-Boot run-time system)
 	       |	       .	       | |
-	       |	       .	       |  > CFG_MONITOR_LEN
+	       |	       .	       |  > CONFIG_SYS_MONITOR_LEN
 	       |	       .	       | |   = 0x00040000
 	       |	       .	       | |
 	       |	       .	       | /
   0x02fc0000 --+32-----------16|15------------0+    TEXT_BASE
 	       |	       .	       | \
-	       |	       .	       |  > CFG_MALLOC_LEN (heap)
+	       |	       .	       |  > CONFIG_SYS_MALLOC_LEN (heap)
 	       |	       .	       | /
 	     --+32-----------16|15------------0+
 	       |	       .	       | \
-	       |	       .	       |  > CFG_GBL_DATA_SIZE (global)
+	       |	       .	       |  > CONFIG_SYS_GBL_DATA_SIZE (global)
 	       |	       .	       | /
-	     --+32-----------16|15------------0+    CFG_INIT_SP (u-boot stack)
+	     --+32-----------16|15------------0+    CONFIG_SYS_INIT_SP (u-boot stack)
 	       |	       .	       | \ \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
@@ -159,17 +159,17 @@
 	       |	       .	       | | V
 	       |	       .	       | |
 	       |	       .	       | |
-  SDRAM	       |	       .	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       .	       | |   = 0x01000000
 	       |	       .	       | |
   0x02000100   |- - - - - - - - - - - - - - - -+-|-
 	       |	       .	       | | \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |			       | / /
-  0x02000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_VEC_BASE
-  0x02000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x02000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x02000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |			       | \
 	       :	      gap	       :  > (space for 2nd Flash)
 	       |			       | /
@@ -177,11 +177,11 @@
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x01000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x01000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -207,7 +207,7 @@
 	       | |- - - - - - -|- - - - - - -| | |
 	       | | EPH STATUS  | TCR	     | | |
 	       | +---------------------------+ | /
-  0x00010000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00010000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -223,13 +223,13 @@
   IDE1 i/f     :	       :	       :  > 0x00000020
   [5]	       :	       :	       : |
 	       |	       |	       | /
-  0x00001020 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE1
+  0x00001020 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE1
 	       |	       |	       | \
 	       :	       :	       : |
   IDE0 i/f     :	       :	       :  > 0x00000020
   [5]	       :	       :	       : |
 	       |	       |	       | /
-  0x00001000 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00001000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -241,7 +241,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO13
+  0x00000970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO13
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO12        |  interruptmask (1 bit)	 (rw)  | |
@@ -249,7 +249,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO12
+  0x00000960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO12
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO11        |  interruptmask (1 bit)	 (rw)  | |
@@ -257,7 +257,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000950 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO11
+  0x00000950 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO11
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO10        |  interruptmask (1 bit)	 (rw)  | |
@@ -265,7 +265,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000940 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO10
+  0x00000940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO10
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO9         |  interruptmask (1 bit)	 (rw)  | |
@@ -273,7 +273,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000930 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO9
+  0x00000930 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO9
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO8         |  interruptmask (1 bit)	 (rw)  | |
@@ -281,7 +281,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000920 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO8
+  0x00000920 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO8
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7         |  interruptmask (1 bit)	 (rw)  | |
@@ -289,7 +289,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000910 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x00000910 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6         |  interruptmask (1 bit)	 (rw)  | |
@@ -297,7 +297,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000900 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x00000900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -317,7 +317,7 @@
 	       |  txdata (16 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (16 bit)	 (ro)  | /
-  0x000008c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_SPI0
+  0x000008c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SPI0
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |		     (unused)  | |
@@ -325,7 +325,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x000008b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x000008b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -333,7 +333,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x000008a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x000008a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -341,7 +341,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000890 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00000890 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -349,7 +349,7 @@
 	       |  direction (4 bit)      (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (rw)  | /
-  0x00000880 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00000880 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -357,7 +357,7 @@
 	       |  direction (8 bit)      (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (rw)  | /
-  0x00000870 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00000870 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |		     (unused)  | |
@@ -365,7 +365,7 @@
 	       |  direction (8 bit)      (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (rw)  | /
-  0x00000860 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00000860 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -381,7 +381,7 @@
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00000840 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00000840 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -397,7 +397,7 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000820 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+  0x00000820 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -413,18 +413,18 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000800 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00000800 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00000800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 
 ===============================================================================
diff --git a/doc/README.alaska8220 b/doc/README.alaska8220
index 8e659f3..0bd68d9 100644
--- a/doc/README.alaska8220
+++ b/doc/README.alaska8220
@@ -87,12 +87,12 @@
 3.1 Explanation on NEW definitions in include/configs/alaska8220.h
     CONFIG_MPC8220	    MPC8220 specific
     CONFIG_ALASKA8220	    Alaska board specific
-    CFG_MPC8220_CLKIN	    Define Alaska Input Clock
+    CONFIG_SYS_MPC8220_CLKIN	    Define Alaska Input Clock
     CONFIG_PSC_CONSOLE	    Enable MPC8220 UART
     CONFIG_EXTUART_CONSOLE  Enable External 16552 UART
-    CFG_AMD_BOOT	    To determine the u-boot is booted from AMD or Intel
-    CFG_MBAR		    MBAR base address
-    CFG_DEFAULT_MBAR	    Reset MBAR base address
+    CONFIG_SYS_AMD_BOOT	    To determine the u-boot is booted from AMD or Intel
+    CONFIG_SYS_MBAR		    MBAR base address
+    CONFIG_SYS_DEFAULT_MBAR	    Reset MBAR base address
 
 3.2 Compilation
    export CROSS_COMPILE=cross-compile-prefix
diff --git a/doc/README.cmi b/doc/README.cmi
index 884854d..0edd50a 100644
--- a/doc/README.cmi
+++ b/doc/README.cmi
@@ -35,17 +35,17 @@
 
 Memory Map after relocation:
 
-    0x0000 0000		CFG_SDRAM_BASE
+    0x0000 0000		CONFIG_SYS_SDRAM_BASE
 	  :
     0x000F 9FFF
 	  :
 	  :
-    0x0100 0000		CFG_IMMR (Internal memory map base adress)
+    0x0100 0000		CONFIG_SYS_IMMR (Internal memory map base adress)
 	  :
     0x0130 7FFF
 	  :
 	  :
-    0x0200 0000		CFG_FLASH_BASE
+    0x0200 0000		CONFIG_SYS_FLASH_BASE
 	  :
     0x027C FFFF
 	  :
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32
index 521fab7..2be1299 100644
--- a/doc/README.dk1c20_std32
+++ b/doc/README.dk1c20_std32
@@ -20,25 +20,25 @@
 	no Debug Core
 	On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 4096
-			CFG_NIOS_CPU_DCACHE	     = 4096
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 OCI:	(TODO)
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CFG_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CFG_NIOS_CPU_PIO0_IRQ   = 40
-	 45   | ASMI	  |  CFG_NIOS_CPU_ASMI0_IRQ  = 45
-	 50   | TIMER1	  |  CFG_NIOS_CPU_TIMER1_IRQ = 50
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
+	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
+	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
+	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
+	 45   | ASMI	  |  CONFIG_SYS_NIOS_CPU_ASMI0_IRQ  = 45
+	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
 
 MEMORY:	 8 MByte Flash
 	 1 MByte SRAM
@@ -49,8 +49,8 @@
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 1
-			CFG_NIOS_CPU_USER_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -63,14 +63,14 @@
 	 PIO6 | CFPOWER:    1 output to controll CF power supply
 	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 0
-			CFG_NIOS_CPU_LCD_PIO	     = 1
-			CFG_NIOS_CPU_LED_PIO	     = 2
-			CFG_NIOS_CPU_SEVENSEG_PIO    = 3
-			CFG_NIOS_CPU_RECONF_PIO	     = 4
-			CFG_NIOS_CPU_CFPRESENT_PIO   = 5
-			CFG_NIOS_CPU_CFPOWER_PIO     = 6
-			CFG_NIOS_CPU_CFATASEL_PIO    = 7
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
 	       without handshake RTS/CTS (IRQ25)
@@ -91,10 +91,10 @@
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -110,7 +110,7 @@
   ASMI i/f     :   and content :	       :  > 0x________
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920b00 ---32-----------16|15------------0-    CFG_NIOS_CPU_ASMI0
+  0x00920b00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ASMI0
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -120,7 +120,7 @@
   IDE i/f      :   and content :	       :  > 0x00000080
   [6]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -136,7 +136,7 @@
 	       |  control (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER1
+  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7	       |		     (unused)  | |
@@ -144,7 +144,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6	       |		     (unused)  | |
@@ -152,7 +152,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |  interruptmask (1 bit)	 (rw)  | |
@@ -160,7 +160,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -168,7 +168,7 @@
 	       |  direction (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -176,7 +176,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -184,7 +184,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -192,7 +192,7 @@
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |  edgecapture (4 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |  interruptmask (4 bit)	 (rw)  | |
@@ -200,7 +200,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -216,7 +216,7 @@
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART1)
 	       |			       | /
@@ -236,28 +236,28 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
 
   0x00920900 -----------------------------------
 	       |			       | \
 	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CFG_NIOS_CPU_OCI_SIZE
+  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
 	       :   unknown)		       : |   = 0x00000100
 	       |			       | /
-  0x00920800 -----------------------------------    CFG_NIOS_CPU_OCI_BASE
+  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
 
 - - - - - - - - - - -	on chip memory	  - - - - - - - - - - -
 
   0x00920800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 - - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
 
@@ -279,7 +279,7 @@
 	       | +---------------------------+ | |
   0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -293,30 +293,30 @@
   0x00900000 --+32-----------16|15------------0+
 	       |	       :	       | \ \
 	       |	       :	       | | |
-	       |	       :	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       :	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       :	       | | |   = 0x00000100
 	       |	       :	       | | /
-  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       :	       | | \
 	       |	       :	       | | |
 	       |	       :	       | |  > stack area
 	       |	       :	       | | |
 	       |	       :	       | | V
 	       |	       :	       | |
-  SRAM	       |	       :	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       :	       | |   = 0x00100000
 	       |	       :	       | /
-  0x00800000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
   0x00800000 ---8-------------4|3-------------0-
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 
 
 ===============================================================================
diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20
index fcf8170..74e07a9 100644
--- a/doc/README.dk1s10_mldk20
+++ b/doc/README.dk1s10_mldk20
@@ -18,29 +18,29 @@
 	no Debug Core
 	no On Chip Instrumentation (OCI)
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 75000000
-			CFG_NIOS_CPU_ICACHE	     = (not present)
-			CFG_NIOS_CPU_DCACHE	     = (not present)
-			CFG_NIOS_CPU_REG_NUMS	     = 512
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 75000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 512
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 17   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 17
-	 18   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 18
-	 20   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 20
-	 25   | IDE0	  |  CFG_NIOS_CPU_IDE0_IRQ   = 25
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 17   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 17
+	 18   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 18
+	 20   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 20
+	 25   | IDE0	  |  CONFIG_SYS_NIOS_CPU_IDE0_IRQ   = 25
 
 MEMORY:	 8 MByte Flash
 	16 MByte SDRAM
 
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
-			CFG_NIOS_CPU_USER_TIMER	     = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = (not present)
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -54,14 +54,14 @@
 	      | CFPRESENT:  1 input for CF present event (IRQ35)
 	      | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 1
-			CFG_NIOS_CPU_LCD_PIO	     = (not present)
-			CFG_NIOS_CPU_LED_PIO	     = (not present)
-			CFG_NIOS_CPU_SEVENSEG_PIO    = (not present)
-			CFG_NIOS_CPU_RECONF_PIO	     = (not present)
-			CFG_NIOS_CPU_CFPRESENT_PIO   = (not present)
-			CFG_NIOS_CPU_CFPOWER_PIO     = 0
-			CFG_NIOS_CPU_CFATASEL_PIO    = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = (not present)
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = (not present)
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = (not present)
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = (not present)
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = (not present)
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 0
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = (not present)
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       without handshake RTS/CTS (IRQ17)
@@ -81,7 +81,7 @@
 
 - - - - - - - - - - -   external memory   - - - - - - - - - - - - - - - - - - -
 
-  0x02000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_STACK
+  0x02000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_STACK
   0x02000000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
@@ -90,25 +90,25 @@
 	       |	       .	       | | V
 	       |	       .	       | |
 	       |	       .	       | |
-  SDRAM	       |	       .	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       .	       | |   = 0x01000000
 	       |	       .	       | |
   0x01000100   |- - - - - - - - - - - - - - - -+-|-
 	       |	       .	       | | \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |			       | / /
-  0x01000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_VEC_BASE
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x01000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00800000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00800000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -136,7 +136,7 @@
 	       | +---------------------------+ | |
   0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00010000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00010000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -152,7 +152,7 @@
   IDE i/f      :   and content :	       :  > 0x00000080
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00000900 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00000900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |			       | \
 	       :	      gap	       :  > (space for PIO4..7)
 	       |			       | /
@@ -172,7 +172,7 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x000008a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+  0x000008a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
 	       |			       | \
 	       :	      gap	       :  > (space for PIO2..3)
 	       |			       | /
@@ -184,7 +184,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00000870 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00000870 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |		     (unused)  | |
@@ -192,7 +192,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x00000860 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00000860 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -208,7 +208,7 @@
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00000840 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00000840 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART2)
 	       |			       | /
@@ -228,18 +228,18 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000800 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00000800 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00000800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 ===============================================================================
 	F L A S H   M E M O R Y	  A L L O C A T I O N
diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32
index d649eb3..622b2b9 100644
--- a/doc/README.dk1s10_std32
+++ b/doc/README.dk1s10_std32
@@ -19,24 +19,24 @@
 	no Debug Core
 	On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 4096
-			CFG_NIOS_CPU_DCACHE	     = 4096
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 OCI:	(TODO)
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CFG_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CFG_NIOS_CPU_PIO0_IRQ   = 40
-	 50   | TIMER1	  |  CFG_NIOS_CPU_TIMER1_IRQ = 50
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
+	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
+	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
+	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
+	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
 
 MEMORY:	 8 MByte Flash
 	 1 MByte SRAM
@@ -45,8 +45,8 @@
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 1
-			CFG_NIOS_CPU_USER_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -59,14 +59,14 @@
 	 PIO6 | CFPOWER:    1 output to controll CF power supply
 	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 0
-			CFG_NIOS_CPU_LCD_PIO	     = 1
-			CFG_NIOS_CPU_LED_PIO	     = 2
-			CFG_NIOS_CPU_SEVENSEG_PIO    = 3
-			CFG_NIOS_CPU_RECONF_PIO	     = 4
-			CFG_NIOS_CPU_CFPRESENT_PIO   = 5
-			CFG_NIOS_CPU_CFPOWER_PIO     = 6
-			CFG_NIOS_CPU_CFATASEL_PIO    = 7
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
 	       without handshake RTS/CTS (IRQ25)
@@ -87,10 +87,10 @@
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -106,7 +106,7 @@
   IDE i/f      :   and content :	       :  > 0x00000080
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -122,7 +122,7 @@
 	       |  control (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER1
+  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7	       |		     (unused)  | |
@@ -130,7 +130,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6	       |		     (unused)  | |
@@ -138,7 +138,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |  interruptmask (1 bit)	 (rw)  | |
@@ -146,7 +146,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -154,7 +154,7 @@
 	       |  direction (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -162,7 +162,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -170,7 +170,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -178,7 +178,7 @@
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |  edgecapture (4 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |  interruptmask (4 bit)	 (rw)  | |
@@ -186,7 +186,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -202,7 +202,7 @@
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART1)
 	       |			       | /
@@ -222,28 +222,28 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
 
   0x00920900 -----------------------------------
 	       |			       | \
 	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CFG_NIOS_CPU_OCI_SIZE
+  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
 	       :   unknown)		       : |   = 0x00000100
 	       |			       | /
-  0x00920800 -----------------------------------    CFG_NIOS_CPU_OCI_BASE
+  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
 
 - - - - - - - - - - -  on chip memory 2	  - - - - - - - - - - -
 
   0x00920800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 - - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
 
@@ -265,17 +265,17 @@
 	       | +---------------------------+ | |
   0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00910000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  onchip RAM   |	       :	       |  > CFG_NIOS_CPU_RAM_SIZE
+  onchip RAM   |	       :	       |  > CONFIG_SYS_NIOS_CPU_RAM_SIZE
 	       |	       :	       | |   = 0x00010000
 	       |	       :	       | /
-  0x00900000 ---32-----------16|15------------0-    CFG_NIOS_CPU_RAM_BASE
+  0x00900000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_RAM_BASE
 
 - - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
 
@@ -283,30 +283,30 @@
   0x00900000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |	       .	       | | /
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | | \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
 	       |	       .	       | | |
 	       |	       .	       | | V
 	       |	       .	       | |
-  SRAM	       |	       .	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       .	       | |   = 0x00100000
 	       |			       | /
-  0x00800000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
   0x00800000 ---8-------------4|3-------------0-
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 
 
 ===============================================================================
diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32
index 08c8244..9a0ea06 100644
--- a/doc/README.dk1s40_std32
+++ b/doc/README.dk1s40_std32
@@ -19,24 +19,24 @@
 	no Debug Core
 	On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 4096
-			CFG_NIOS_CPU_DCACHE	     = 4096
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 OCI:	(TODO)
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CFG_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CFG_NIOS_CPU_PIO0_IRQ   = 40
-	 50   | TIMER1	  |  CFG_NIOS_CPU_TIMER1_IRQ = 50
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
+	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
+	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
+	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
+	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
 
 MEMORY:	 8 MByte Flash
 	 1 MByte SRAM
@@ -45,8 +45,8 @@
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 1
-			CFG_NIOS_CPU_USER_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -59,14 +59,14 @@
 	 PIO6 | CFPOWER:    1 output to controll CF power supply
 	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 0
-			CFG_NIOS_CPU_LCD_PIO	     = 1
-			CFG_NIOS_CPU_LED_PIO	     = 2
-			CFG_NIOS_CPU_SEVENSEG_PIO    = 3
-			CFG_NIOS_CPU_RECONF_PIO	     = 4
-			CFG_NIOS_CPU_CFPRESENT_PIO   = 5
-			CFG_NIOS_CPU_CFPOWER_PIO     = 6
-			CFG_NIOS_CPU_CFATASEL_PIO    = 7
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
 	       without handshake RTS/CTS (IRQ25)
@@ -87,10 +87,10 @@
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -106,7 +106,7 @@
   IDE i/f      :   and content :	       :  > 0x00000080
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -122,7 +122,7 @@
 	       |  control (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER1
+  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7	       |		     (unused)  | |
@@ -130,7 +130,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6	       |		     (unused)  | |
@@ -138,7 +138,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |  interruptmask (1 bit)	 (rw)  | |
@@ -146,7 +146,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -154,7 +154,7 @@
 	       |  direction (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -162,7 +162,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -170,7 +170,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -178,7 +178,7 @@
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |  edgecapture (4 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |  interruptmask (4 bit)	 (rw)  | |
@@ -186,7 +186,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -202,7 +202,7 @@
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART1)
 	       |			       | /
@@ -222,28 +222,28 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
 
   0x00920900 -----------------------------------
 	       |			       | \
 	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CFG_NIOS_CPU_OCI_SIZE
+  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
 	       :   unknown)		       : |   = 0x00000100
 	       |			       | /
-  0x00920800 -----------------------------------    CFG_NIOS_CPU_OCI_BASE
+  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
 
 - - - - - - - - - - -  on chip memory 2	  - - - - - - - - - - -
 
   0x00920800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 - - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
 
@@ -265,17 +265,17 @@
 	       | +---------------------------+ | |
   0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00910000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  onchip RAM   |	       :	       |  > CFG_NIOS_CPU_RAM_SIZE
+  onchip RAM   |	       :	       |  > CONFIG_SYS_NIOS_CPU_RAM_SIZE
 	       |	       :	       | |   = 0x00010000
 	       |	       :	       | /
-  0x00900000 ---32-----------16|15------------0-    CFG_NIOS_CPU_RAM_BASE
+  0x00900000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_RAM_BASE
 
 - - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
 
@@ -283,30 +283,30 @@
   0x00900000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |	       .	       | | /
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | | \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
 	       |	       .	       | | |
 	       |	       .	       | | V
 	       |	       .	       | |
-  SRAM	       |	       .	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       .	       | |   = 0x00100000
 	       |			       | /
-  0x00800000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
   0x00800000 ---8-------------4|3-------------0-
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 
 
 ===============================================================================
diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32
index 7b5d4d4..fc2d2a3 100644
--- a/doc/README.dk20k200_std32
+++ b/doc/README.dk20k200_std32
@@ -15,20 +15,20 @@
 	no Debug Core
 	no On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 0
-			CFG_NIOS_CPU_DCACHE	     = 0
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 0
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 0
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 25   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 25
-	 26   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 26
-	 27   | PIO2	  |  CFG_NIOS_CPU_PIO2_IRQ   = 27
-	 28   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 28    (debug)
+	 25   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25
+	 26   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 26
+	 27   | PIO2	  |  CONFIG_SYS_NIOS_CPU_PIO2_IRQ   = 27
+	 28   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 28    (debug)
 
 MEMORY:	  1 MByte Flash
 	256 KByte SRAM
@@ -36,7 +36,7 @@
 
 Timer:	TIMER0: high priority programmable timer (IRQ25)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -45,10 +45,10 @@
 	 PIO2 | BUTTON:	    4 inputs for user push buttons (IRQ27)
 	 PIO3 | LCD:	   11 in/outputs for ASCII LCD
 
-	U-Boot CFG:	CFG_NIOS_CPU_SEVENSEG_PIO    = 0
-			CFG_NIOS_CPU_LED_PIO	     = 1
-			CFG_NIOS_CPU_BUTTON_PIO	     = 2
-			CFG_NIOS_CPU_LCD_PIO	     = 3
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 0
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 3
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       without handshake RTS/CTS (IRQ26)
@@ -70,7 +70,7 @@
 	       |  sector 5     :	       | |
     + 0x020000 |-   -	-   -  -  -   -	  -   -| |
 	       |  sector 4 (size = 0x10000)    | |
-    + 0x010000 |- - - - - - - - - - - - - - - -|  > CFG_NIOS_CPU_FLASH_SIZE
+    + 0x010000 |- - - - - - - - - - - - - - - -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 3 (size = 0x08000)    | |   = 0x00100000
     + 0x008000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 2 (size = 0x02000)    | |
@@ -78,7 +78,7 @@
 	       |  sector 1 (size = 0x02000)    | |
     + 0x004000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x04000)    | /
-  0x00100000 ---15------------8|7-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00100000 ---15------------8|7-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -86,21 +86,21 @@
   0x00080000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |	       .	       | | /
-  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | | \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
 	       |	       .	       | | |
 	       |	       .	       | | V
 	       |	       .	       | |
-  SRAM	       |	       .	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       .	       | |   = 0x00040000
 	       |			       | /
-  0x00040000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00040000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -126,7 +126,7 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x000004c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+  0x000004c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -138,7 +138,7 @@
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00000480 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00000480 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |  edgecapture (12 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |  interruptmask (12 bit) (rw)  | |
@@ -146,7 +146,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (12 bit)		 (ro)  | /
-  0x00000470 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00000470 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -154,7 +154,7 @@
 	       |  direction (2 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (2 bit)		 (rw)  | /
-  0x00000460 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00000460 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -170,7 +170,7 @@
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00000440 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00000440 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |		     (unused)  | |
@@ -178,7 +178,7 @@
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00000420 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00000420 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -194,7 +194,7 @@
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000400 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00000400 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -	on chip memory	  - - - - - - - - - - -
 
diff --git a/doc/README.ebony b/doc/README.ebony
index 8b030db..a395a49 100644
--- a/doc/README.ebony
+++ b/doc/README.ebony
@@ -35,7 +35,7 @@
 =====================
 
 The i2c utilities have been tested on both Rev B. and Rev C. and
-look good. The CFG_I2C_NOPROBES macro is defined to prevent
+look good. The CONFIG_SYS_I2C_NOPROBES macro is defined to prevent
 probing the CDCV850 clock controller at address 0x69 (since reading
 it causes the i2c implementation to misbehave. The output of
 iprobe should look like this (assuming you are only using a single
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index 147ea51..ba7cea8 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -11,24 +11,24 @@
 
 	CONFIG_USB_OHCI_NEW: enable the new OHCI driver
 
-	CFG_USB_OHCI_BOARD_INIT: call the board dependant hooks:
+	CONFIG_SYS_USB_OHCI_BOARD_INIT: call the board dependant hooks:
 
 		  - extern int usb_board_init(void);
 		  - extern int usb_board_stop(void);
 		  - extern int usb_cpu_init_fail(void);
 
-	CFG_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
+	CONFIG_SYS_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
 
 		  - extern int usb_cpu_init(void);
 		  - extern int usb_cpu_stop(void);
 		  - extern int usb_cpu_init_fail(void);
 
-	CFG_USB_OHCI_REGS_BASE: defines the base address of the OHCI
+	CONFIG_SYS_USB_OHCI_REGS_BASE: defines the base address of the OHCI
 				registers
 
-	CFG_USB_OHCI_SLOT_NAME: slot name
+	CONFIG_SYS_USB_OHCI_SLOT_NAME: slot name
 
-	CFG_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the
+	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the
 				     root hub.
 
 
@@ -39,7 +39,7 @@
 OHCI controllers that operate in big endian such as ppc4xx and
 mpc5xxx. For these the config option
 
-	CFG_OHCI_BE_CONTROLLER
+	CONFIG_SYS_OHCI_BE_CONTROLLER
 
 needs to be defined.
 
@@ -60,4 +60,4 @@
 PCI Controllers need to do byte swapping on register accesses, so they
 should to define:
 
-	CFG_OHCI_SWAP_REG_ACCESS
+	CONFIG_SYS_OHCI_SWAP_REG_ACCESS
diff --git a/doc/README.lynxkdi b/doc/README.lynxkdi
index 8fdf495..076f018 100644
--- a/doc/README.lynxkdi
+++ b/doc/README.lynxkdi
@@ -39,9 +39,9 @@
 
 Edit include/configs/MPC8260ADS.h to use the following:
 
-#define CFG_IMMR	0xFA200000
-#define CFG_BCSR	0xFA100000
-#define CFG_BR1_PRELIM	0xFA101801
+#define CONFIG_SYS_IMMR	0xFA200000
+#define CONFIG_SYS_BCSR	0xFA100000
+#define CONFIG_SYS_BR1_PRELIM	0xFA101801
 
 When creating a LynxOS or BlueCat u-boot image using mkimage,
 you must specify the following:
diff --git a/doc/README.m52277evb b/doc/README.m52277evb
index de1daba..e002947 100644
--- a/doc/README.m52277evb
+++ b/doc/README.m52277evb
@@ -70,12 +70,12 @@
 CONFIG_M52277EVB	-- define for M52277EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_MCFRTC		-- define to use common CF RTC driver
-CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
 RTC_DEBUG		-- define to show RTC debug message
 CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 
@@ -85,22 +85,22 @@
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
 
 CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
 update will be provided at later time
diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe
index 0426cb1..f51609f 100644
--- a/doc/README.m5253evbe
+++ b/doc/README.m5253evbe
@@ -28,9 +28,9 @@
 	CONFIG_MCF52x2		Processor family
 	CONFIG_MCF5253		MCF5253 specific
 	CONFIG_M5253EVBE	Amadeus Plus board specific
-	CFG_CLK			Define Amadeus Plus CPU Clock
-	CFG_MBAR		MBAR base address
-	CFG_MBAR2		MBAR2 base address
+	CONFIG_SYS_CLK			Define Amadeus Plus CPU Clock
+	CONFIG_SYS_MBAR		MBAR base address
+	CONFIG_SYS_MBAR2		MBAR2 base address
 
 3.2 Compilation
 	export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf-
diff --git a/doc/README.m5373evb b/doc/README.m5373evb
index b2ef4a5..4781d94 100644
--- a/doc/README.m5373evb
+++ b/doc/README.m5373evb
@@ -67,12 +67,12 @@
 CONFIG_M5373EVB		-- define for M5373EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_MCFRTC		-- define to use common CF RTC driver
-CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
 RTC_DEBUG		-- define to show RTC debug message
 CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 
@@ -80,11 +80,11 @@
 CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
 CONFIG_MII		-- enable to use MII driver
 CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY	-- enable PHY discovery
-CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 
 CONFIG_MCFTMR		-- define to use DMA timer
@@ -93,22 +93,22 @@
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF5373 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5373 internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================
diff --git a/doc/README.m54455evb b/doc/README.m54455evb
index 5c01f0d..f695da5 100644
--- a/doc/README.m54455evb
+++ b/doc/README.m54455evb
@@ -71,12 +71,12 @@
 CONFIG_M54455EVB	-- define for M54455EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_MCFRTC		-- define to use common CF RTC driver
-CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
 RTC_DEBUG		-- define to show RTC debug message
 CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 
@@ -84,13 +84,13 @@
 CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
 CONFIG_MII		-- enable to use MII driver
 CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY	-- enable PHY discovery
-CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CFG_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
-CFG_FEC1_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE	-- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 CONFIG_HAS_ETH1		-- define to enable second FEC in u-boot
 
@@ -100,14 +100,14 @@
 CONFIG_IDE_PREINIT	-- define ide_preinit()
 CONFIG_ATAPI		-- define ATAPI support
 CONFIG_LBA48		-- define LBA48 (larger than 120GB) support
-CFG_IDE_MAXBUS		-- define max channel
-CFG_IDE_MAXDEVICE	-- define max devices per channel
-CFG_ATA_BASE_ADDR	-- define ATA base address
-CFG_ATA_IDE0_OFFSET	-- define ATA IDE0 offset
-CFG_ATA_DATA_OFFSET	-- define ATA data IO
-CFG_ATA_REG_OFFSET	-- define for normal register accesses
-CFG_ATA_ALT_OFFSET	-- define for alternate registers
-CFG_ATA_STRIDE		-- define for Interval between registers
+CONFIG_SYS_IDE_MAXBUS		-- define max channel
+CONFIG_SYS_IDE_MAXDEVICE	-- define max devices per channel
+CONFIG_SYS_ATA_BASE_ADDR	-- define ATA base address
+CONFIG_SYS_ATA_IDE0_OFFSET	-- define ATA IDE0 offset
+CONFIG_SYS_ATA_DATA_OFFSET	-- define ATA data IO
+CONFIG_SYS_ATA_REG_OFFSET	-- define for normal register accesses
+CONFIG_SYS_ATA_ALT_OFFSET	-- define for alternate registers
+CONFIG_SYS_ATA_STRIDE		-- define for Interval between registers
 _IO_BASE		-- define for IO base address
 
 CONFIG_MCFTMR		-- define to use DMA timer
@@ -116,42 +116,42 @@
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
 CONFIG_PCI              -- define for PCI support
 CONFIG_PCI_PNP          -- define for Plug n play support
-CFG_PCI_MEM_BUS		-- PCI memory logical offset
-CFG_PCI_MEM_PHYS	-- PCI memory physical offset
-CFG_PCI_MEM_SIZE	-- PCI memory size
-CFG_PCI_IO_BUS		-- PCI IO logical offset
-CFG_PCI_IO_PHYS		-- PCI IO physical offset
-CFG_PCI_IO_SIZE		-- PCI IO size
-CFG_PCI_CFG_BUS		-- PCI Configuration logical offset
-CFG_PCI_CFG_PHYS	-- PCI Configuration physical offset
-CFG_PCI_CFG_SIZE	-- PCI Configuration size
+CONFIG_SYS_PCI_MEM_BUS		-- PCI memory logical offset
+CONFIG_SYS_PCI_MEM_PHYS	-- PCI memory physical offset
+CONFIG_SYS_PCI_MEM_SIZE	-- PCI memory size
+CONFIG_SYS_PCI_IO_BUS		-- PCI IO logical offset
+CONFIG_SYS_PCI_IO_PHYS		-- PCI IO physical offset
+CONFIG_SYS_PCI_IO_SIZE		-- PCI IO size
+CONFIG_SYS_PCI_CFG_BUS		-- PCI Configuration logical offset
+CONFIG_SYS_PCI_CFG_PHYS	-- PCI Configuration physical offset
+CONFIG_SYS_PCI_CFG_SIZE	-- PCI Configuration size
 
 CONFIG_EXTRA_CLOCK	-- Enable extra clock such as vco, flexbus, pci, etc
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
-CFG_ATMEL_BOOT		-- To determine the u-boot is booted from Atmel or Intel
+CONFIG_SYS_ATMEL_BOOT		-- To determine the u-boot is booted from Atmel or Intel
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_ATMEL_BASE	-- defines the Atmel Flash base
-CFG_INTEL_BASE	-- defines the Intel Flash base
+CONFIG_SYS_ATMEL_BASE	-- defines the Atmel Flash base
+CONFIG_SYS_INTEL_BASE	-- defines the Intel Flash base
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
-CFG_SDRAM_BASE1	-- defines the DRAM Base 1
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE1	-- defines the DRAM Base 1
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================
diff --git a/doc/README.m5475evb b/doc/README.m5475evb
index 37d1438..dc9a605 100644
--- a/doc/README.m5475evb
+++ b/doc/README.m5475evb
@@ -74,20 +74,20 @@
 CONFIG_M5475		-- define for M5475EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_FSLDMAFEC	-- define to use common dma FEC driver
 CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
 CONFIG_MII		-- enable to use MII driver
 CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY	-- enable PHY discovery
-CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CFG_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
-CFG_FEC1_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE	-- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 CONFIG_HAS_ETH1		-- define to enable second FEC in u-boot
 
@@ -101,35 +101,35 @@
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
 CONFIG_PCI		-- define for PCI support
 CONFIG_PCI_PNP		-- define for Plug n play support
 CONFIG_SKIPPCI_HOSTBRIDGE	-- SKIP PCI Host bridge
-CFG_PCI_MEM_BUS		-- PCI memory logical offset
-CFG_PCI_MEM_PHYS	-- PCI memory physical offset
-CFG_PCI_MEM_SIZE	-- PCI memory size
-CFG_PCI_IO_BUS		-- PCI IO logical offset
-CFG_PCI_IO_PHYS		-- PCI IO physical offset
-CFG_PCI_IO_SIZE		-- PCI IO size
-CFG_PCI_CFG_BUS		-- PCI Configuration logical offset
-CFG_PCI_CFG_PHYS	-- PCI Configuration physical offset
-CFG_PCI_CFG_SIZE	-- PCI Configuration size
+CONFIG_SYS_PCI_MEM_BUS		-- PCI memory logical offset
+CONFIG_SYS_PCI_MEM_PHYS	-- PCI memory physical offset
+CONFIG_SYS_PCI_MEM_SIZE	-- PCI memory size
+CONFIG_SYS_PCI_IO_BUS		-- PCI IO logical offset
+CONFIG_SYS_PCI_IO_PHYS		-- PCI IO physical offset
+CONFIG_SYS_PCI_IO_SIZE		-- PCI IO size
+CONFIG_SYS_PCI_CFG_BUS		-- PCI Configuration logical offset
+CONFIG_SYS_PCI_CFG_PHYS	-- PCI Configuration physical offset
+CONFIG_SYS_PCI_CFG_SIZE	-- PCI Configuration size
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================
diff --git a/doc/README.m68k b/doc/README.m68k
index 0c533f3..e6c33a7 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -72,7 +72,7 @@
 http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
 
 U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
+change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
 include/configs/M5282EVB.h.
 
 3.2 BuS EB+MCF-EV123
@@ -95,7 +95,7 @@
 CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
 initial vector table and basic processor initialization will not
 be compiled in. The start address of u-boot must be adjusted in
-the boards config header file (CFG_MONITOR_BASE) and Makefile
+the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
 (TEXT_BASE) to the load address.
 
 4.1 MCF5272 specific Options/Settings
@@ -107,20 +107,20 @@
 CONFIG_MONITOR_IS_IN_RAM
 		-- defined if u-boot is loaded by a pre-loader
 
-CFG_MBAR	-- defines the base address of the MCF5272 configuration registers
-CFG_INIT_RAM_ADDR
+CONFIG_SYS_MBAR	-- defines the base address of the MCF5272 configuration registers
+CONFIG_SYS_INIT_RAM_ADDR
 		-- defines the base address of the MCF5272 internal SRAM
-CFG_ENET_BD_BASE
+CONFIG_SYS_ENET_BD_BASE
 		-- defines the base addres of the FEC buffer descriptors
 
-CFG_SCR		-- defines the contents of the System Configuration Register
-CFG_SPR		-- defines the contents of the System Protection Register
-CFG_BRx_PRELIM	-- defines the contents of the Chip Select Base Registers
-CFG_ORx_PRELIM	-- defines the contents of the Chip Select Option Registers
+CONFIG_SYS_SCR		-- defines the contents of the System Configuration Register
+CONFIG_SYS_SPR		-- defines the contents of the System Protection Register
+CONFIG_SYS_BRx_PRELIM	-- defines the contents of the Chip Select Base Registers
+CONFIG_SYS_ORx_PRELIM	-- defines the contents of the Chip Select Option Registers
 
-CFG_PxDDR	-- defines the contents of the Data Direction Registers
-CFG_PxDAT	-- defines the contents of the Data Registers
-CFG_PXCNT	-- defines the contents of the Port Configuration Registers
+CONFIG_SYS_PxDDR	-- defines the contents of the Data Direction Registers
+CONFIG_SYS_PxDAT	-- defines the contents of the Data Registers
+CONFIG_SYS_PXCNT	-- defines the contents of the Port Configuration Registers
 
 
 4.2 MCF5282 specific Options/Settings
@@ -132,32 +132,32 @@
 CONFIG_MONITOR_IS_IN_RAM
 		-- defined if u-boot is loaded by a pre-loader
 
-CFG_MBAR	-- defines the base address of the MCF5282 internal register space
-CFG_INIT_RAM_ADDR
+CONFIG_SYS_MBAR	-- defines the base address of the MCF5282 internal register space
+CONFIG_SYS_INIT_RAM_ADDR
 		-- defines the base address of the MCF5282 internal SRAM
-CFG_INT_FLASH_BASE
+CONFIG_SYS_INT_FLASH_BASE
 		-- defines the base address of the MCF5282 internal Flash memory
-CFG_ENET_BD_BASE
+CONFIG_SYS_ENET_BD_BASE
 		-- defines the base addres of the FEC buffer descriptors
 
-CFG_MFD
+CONFIG_SYS_MFD
 		-- defines the PLL Multiplication Factor Devider
 		   (see table 9-4 of MCF user manual)
-CFG_RFD		-- defines the PLL Reduce Frecuency Devider
+CONFIG_SYS_RFD		-- defines the PLL Reduce Frecuency Devider
 		   (see table 9-4 of MCF user manual)
 
-CFG_CSx_BASE	-- defines the base address of chip select x
-CFG_CSx_SIZE	-- defines the memory size (address range) of chip select x
-CFG_CSx_WIDTH	-- defines the bus with of chip select x
-CFG_CSx_RO	-- if set to 0 chip select x is read/wirte
+CONFIG_SYS_CSx_BASE	-- defines the base address of chip select x
+CONFIG_SYS_CSx_SIZE	-- defines the memory size (address range) of chip select x
+CONFIG_SYS_CSx_WIDTH	-- defines the bus with of chip select x
+CONFIG_SYS_CSx_RO	-- if set to 0 chip select x is read/wirte
 			else chipselct is read only
-CFG_CSx_WS	-- defines the number of wait states  of chip select x
+CONFIG_SYS_CSx_WS	-- defines the number of wait states  of chip select x
 
-CFG_PxDDR	-- defines the contents of the Data Direction Registers
-CFG_PxDAT	-- defines the contents of the Data Registers
-CFG_PXCNT	-- defines the contents of the Port Configuration Registers
+CONFIG_SYS_PxDDR	-- defines the contents of the Data Direction Registers
+CONFIG_SYS_PxDAT	-- defines the contents of the Data Registers
+CONFIG_SYS_PXCNT	-- defines the contents of the Port Configuration Registers
 
-CFG_PxPAR	-- defines the function of ports
+CONFIG_SYS_PxPAR	-- defines the function of ports
 
 
 5. COMPILER
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 6099da2..d3563a3 100644
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -33,28 +33,28 @@
 	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
 	ex.	#define CONFIG_PCMCIA_SLOT_A    1
 
-    * CFG_MARUBUN_MRSHPC
+    * CONFIG_SYS_MARUBUN_MRSHPC
 	This is MR-SHPC-01 PCMCIA controler base address.
 	You should do the setting matched to your environment.
-	ex.  #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+	ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
 	     ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
 	This is MR-SHPC-01 memory window base address.
 	You should do the setting matched to your environment.
-	ex. #define CFG_MARUBUN_MW1 0xb0400000
+	ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
 	     ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
 	This is MR-SHPC-01 attribute window base address.
 	You should do the setting matched to your environment.
-	ex. #define CFG_MARUBUN_MW2 0xb0500000
+	ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
 	     ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
 	This is MR-SHPC-01 I/O window base address.
 	You should do the setting matched to your environment.
-	ex. #define CFG_MARUBUN_IO  0xb0600000
+	ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
 	     ( for MS7722SE01 environment )
 
 3. Other
diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb
index cd56689..7c1af17 100644
--- a/doc/README.mpc8313erdb
+++ b/doc/README.mpc8313erdb
@@ -3,7 +3,7 @@
 
 1.	Board Switches and Jumpers
 
-	S3 is used to set CFG_RESET_SOURCE.
+	S3 is used to set CONFIG_SYS_RESET_SOURCE.
 
 	To boot the image at 0xFE000000 in NOR flash, use these DIP
 	switch settings for S3 S4:
diff --git a/doc/README.mpc8315erdb b/doc/README.mpc8315erdb
index e77eba7..7d476d0 100644
--- a/doc/README.mpc8315erdb
+++ b/doc/README.mpc8315erdb
@@ -3,7 +3,7 @@
 
 1.	Board Switches and Jumpers
 
-	S3 is used to set CFG_RESET_SOURCE.
+	S3 is used to set CONFIG_SYS_RESET_SOURCE.
 
 	To boot the image at 0xFE000000 in NOR flash, use these DIP
 	switch settings for S3 S4:
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index 1c41d77..2c3c703 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -21,16 +21,16 @@
 	J14 Pins 1-2 (near plcc32 socket)
 
 Switches:
-	SW1(1-5) = 01100	CFG_COREPLL	= 01000 :: CORE =   2:1
+	SW1(1-5) = 01100	CONFIG_SYS_COREPLL	= 01000 :: CORE =   2:1
 						  01100 :: CORE = 2.5:1
 						  10000 :: CORE =   3:1
 						  11100 :: CORE = 3.5:1
 						  10100 :: CORE =   4:1
 						  01110 :: CORE = 4.5:1
-	SW1(6-8) = 001		CFG_SYSCLK	= 000	:: SYSCLK = 33MHz
+	SW1(6-8) = 001		CONFIG_SYS_SYSCLK	= 000	:: SYSCLK = 33MHz
 						  001	:: SYSCLK = 40MHz
 
-	SW2(1-4) = 1100		CFG_CCBPLL	= 0010	:: 2X
+	SW2(1-4) = 1100		CONFIG_SYS_CCBPLL	= 0010	:: 2X
 						  0100	:: 4X
 						  0110	:: 6X
 						  1000	:: 8X
@@ -38,34 +38,34 @@
 						  1100	:: 12X
 						  1110	:: 14X
 						  0000	:: 16X
-	SW2(5-8) = 1110		CFG_BOOTLOC	= 1110	:: boot 16-bit localbus
+	SW2(5-8) = 1110		CONFIG_SYS_BOOTLOC	= 1110	:: boot 16-bit localbus
 
-	SW3(1-7) = 0011000	CFG_VID		= 0011000 :: VCORE = 1.2V
+	SW3(1-7) = 0011000	CONFIG_SYS_VID		= 0011000 :: VCORE = 1.2V
 						  0100000 :: VCORE = 1.11V
 	SW3(8)	 = 0		VCC_PLAT	= 0	:: VCC_PLAT = 1.2V
 						  1	:: VCC_PLAT = 1.0V
 
-	SW4(1-2) = 11		CFG_HOSTMODE	= 11	:: both prots host/root
-	SW4(3-4) = 11		CFG_BOOTSEQ	= 11	:: no boot seq
-	SW4(5-8) = 0011		CFG_IOPORT	= 0011	:: both PEX
+	SW4(1-2) = 11		CONFIG_SYS_HOSTMODE	= 11	:: both prots host/root
+	SW4(3-4) = 11		CONFIG_SYS_BOOTSEQ	= 11	:: no boot seq
+	SW4(5-8) = 0011		CONFIG_SYS_IOPORT	= 0011	:: both PEX
 
-	SW5(1)	 = 1		CFG_FLASHMAP	= 1	:: boot from flash
+	SW5(1)	 = 1		CONFIG_SYS_FLASHMAP	= 1	:: boot from flash
 						  0	:: boot from PromJet
-	SW5(2)	 = 1		CFG_FLASHBANK	= 1	:: swap upper/lower
+	SW5(2)	 = 1		CONFIG_SYS_FLASHBANK	= 1	:: swap upper/lower
 							 halves (virtual banks)
 						  0	:: normal
-	SW5(3)	 = 0		CFG_FLASHWP	= 0	:: not protected
-	SW5(4)	 = 0		CFG_PORTDIV	= 1	:: 2:1 for PD4
+	SW5(3)	 = 0		CONFIG_SYS_FLASHWP	= 0	:: not protected
+	SW5(4)	 = 0		CONFIG_SYS_PORTDIV	= 1	:: 2:1 for PD4
 							   1:1 for PD6
-	SW5(5-6) = 11		CFG_PIXISOPT	= 11	:: s/w determined
-	SW5(7-8) = 11		CFG_LADOPT	= 11	:: s/w determined
+	SW5(5-6) = 11		CONFIG_SYS_PIXISOPT	= 11	:: s/w determined
+	SW5(7-8) = 11		CONFIG_SYS_LADOPT	= 11	:: s/w determined
 
-	SW6(1)	 = 1		CFG_CPUBOOT	= 1	:: no boot holdoff
-	SW6(2)	 = 1		CFG_BOOTADDR	= 1	:: no traslation
-	SW6(3-5) = 000		CFG_REFCLKSEL	= 000	:: 100MHZ
-	SW6(6)	 = 1		CFG_SERROM_ADDR= 1	::
-	SW6(7)	 = 1		CFG_MEMDEBUG	= 1	::
-	SW6(8)	 = 1		CFG_DDRDEBUG	= 1	::
+	SW6(1)	 = 1		CONFIG_SYS_CPUBOOT	= 1	:: no boot holdoff
+	SW6(2)	 = 1		CONFIG_SYS_BOOTADDR	= 1	:: no traslation
+	SW6(3-5) = 000		CONFIG_SYS_REFCLKSEL	= 000	:: 100MHZ
+	SW6(6)	 = 1		CONFIG_SYS_SERROM_ADDR= 1	::
+	SW6(7)	 = 1		CONFIG_SYS_MEMDEBUG	= 1	::
+	SW6(8)	 = 1		CONFIG_SYS_DDRDEBUG	= 1	::
 
 	SW8(1)	 = 1		ACZ_SYNC	= 1	:: 48MHz on TP49
 	SW8(2)	 = 1		ACB_SYNC	= 1	:: THRMTRIP disabled
@@ -74,7 +74,7 @@
 	SW8(5)	 = 0		SUSLED		= 0	:: SouthBridge Mode
 	SW8(6)	 = 0		SPREAD		= 0	:: REFCLK SSCG Disabled
 	SW8(7)	 = 1		ACPWR		= 1	:: non-battery
-	SW8(8)	 = 0		CFG_IDWP	= 0	:: write enable
+	SW8(8)	 = 0		CONFIG_SYS_IDWP	= 0	:: write enable
 
 
 3. Flash U-Boot
diff --git a/doc/README.nand b/doc/README.nand
index 6dac24c..bf80bc0 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -95,7 +95,7 @@
       CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for
       someone to implement.
 
-   CFG_MAX_NAND_DEVICE
+   CONFIG_SYS_MAX_NAND_DEVICE
       The maximum number of NAND devices you want to support.
 
 NAND Interface:
@@ -164,7 +164,7 @@
    These definitions are needed in the board configuration for now, but
    may really belong in a header file.
    TODO: Figure which ones are truly configuration settings and rename
-	 them to CFG_NAND_... and move the rest somewhere appropriate.
+	 them to CONFIG_SYS_NAND_... and move the rest somewhere appropriate.
 
    #define SECTORSIZE 512
    #define ADDR_COLUMN 1
@@ -174,7 +174,7 @@
    #define NAND_MAX_FLOORS 1
    #define NAND_MAX_CHIPS 1
 
-   #define CFG_DAVINCI_BROKEN_ECC
+   #define CONFIG_SYS_DAVINCI_BROKEN_ECC
       Versions of U-Boot <= 1.3.3 and Montavista Linux kernels
       generated bogus ECCs on large-page NAND. Both large and small page
       NAND ECCs were incompatible with the Linux davinci git tree (since
diff --git a/doc/README.nios b/doc/README.nios
index 2f11489..7f34938 100644
--- a/doc/README.nios
+++ b/doc/README.nios
@@ -68,11 +68,11 @@
 2.1 Nios-specific Options/Settings
 -----------------------------------
 All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_", "CFG_NIOS_", or "CFG_NIOS_CPU_".
+with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_".
 
 The configuration follows a two-stage process. In the first stage
 the NIOS CPU core will defined like defined in Alteras SOPC Builder.
-At this point we use the "CFG_NIOS_CPU_" defines exclusively. For
+At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For
 more informations about all the definitions you have to setup see
 into current board configurations and doc/README.nios_CFG_NIOS_CPU.
 
@@ -85,41 +85,41 @@
 
 CONFIG_NIOS -- defined for all Nios-32 boards.
 
-CFG_NIOS_CONSOLE -- the base address of the console UART or the JTAG
+CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG
 	stdio port. To enable a console via JTAG, define
 	CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address
 	of the JTAG stdio port (normally OCI base + 0x00fa). Then
 	run nios-console with the -w option.
 	(standard-32: nasys_uart_0 resp. na_uart1_base).
 
-CFG_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
+CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
 	parameter is set to '1'.
 
-CFG_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
+CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
 
-CFG_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
+CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
 	MSTEP instruction (not yet implemented).
 
-CFG_NIOS_TMRBASE -- the base address of the timer used to support
+CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support
 	xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
 	(standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
 
-CFG_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
+CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
 	the timer. (standard-32: nasys_timer_1_irq resp.
 	na_low_priority_timer2_irq).
 
-CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
+CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds.
 
-CFG_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
+CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
 	no fixed period.
 
-CFG_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
+CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
 	(standard-32: na_asmi_base).
 
-CFG_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
+CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
 	(nasys_spi_0)
 
-CFG_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
+CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
 	This value can be 8 or 16 only! (PTF: databits)
 
 
@@ -128,7 +128,7 @@
 Some 'standard' U-Boot options/settings are treated differently in
 the Nios port. These are described below.
 
-CFG_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
+CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
 	global data structure in the Nios memory space. More simply,
 	the address of global data.
 
@@ -156,17 +156,17 @@
 4.1 Boot process over GERMS
 ---------------------------
 When the NIOS CPU catch a reset signal it will begin to be running
-code from CFG_NIOS_CPU_RST_VECT. Normally at this place it will
+code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will
 find the GERMS monitor. That's the case for the generic NIOS CPU
 configuration "standard_32". When the GERMS monitor starts running,
 it performs important system initializations and then looks for
 executable code in flash, using the following steps:
 
-    1. Examining the two bytes at CFG_NIOS_CPU_FLASH_BASE + 0x04000C.
-    2. Examining the button 0 on the PIO CFG_NIOS_CPU_BUTTON_PIO.
+    1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C.
+    2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO.
     3. If the button is not pressed and the two bytes contain 'N'
        and 'i', the monitor executes a CALL to location
-       CFG_NIOS_CPU_FLASH_BASE + 0x040000.
+       CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000.
     4. If the code is not executed in step 3 or the code returns,
        then prints an 8-digit version number to STDOUT and waits for
        user commands from STDIN.
@@ -181,9 +181,9 @@
 immediately executes the code. To return program execution to the
 GERMS monitor (that is, avoid running code stored in flash memory):
 
-    1. Hold down CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+    1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
     2. Press then release the CPU reset button.
-    3. Release CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+    3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
 
 
 5. DEBUGGING WITH GDB
@@ -354,7 +354,7 @@
 -Add boot support for ucLinux (niosnommu).
 
 -Implement (don't copy Altera code) the __mulxx routines using the
- MSTEP and MUL instructions (e.g. CFG_NIOS_MULT_HW and CFG_NIOS_MULT_MSTEP).
+ MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP).
 
 
 Regards,
diff --git a/doc/README.nios_CFG_NIOS_CPU b/doc/README.nios_CFG_NIOS_CPU
deleted file mode 100644
index e38ed91..0000000
--- a/doc/README.nios_CFG_NIOS_CPU
+++ /dev/null
@@ -1,140 +0,0 @@
-
-===============================================================================
-	C F G _ N I O S _ C P U _ *   v s .   N I O S	S D K
-===============================================================================
-
-When ever you have to make a new NIOS CPU configuration you can use this table
-as a reference list to the original NIOS SDK symbols made by Alteras SOPC
-Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
-Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
-(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
-
-C O R E					N I O S	  S D K			[1],[7]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_CLK					nasys_clock_freq
-CFG_NIOS_CPU_ICACHE					nasys_icache_size
-CFG_NIOS_CPU_DCACHE					nasys_dcache_size
-CFG_NIOS_CPU_REG_NUMS					nasys_nios_num_regs
-CFG_NIOS_CPU_MUL					__nios_use_multiply__
-CFG_NIOS_CPU_MSTEP					__nios_use_mstep__
-CFG_NIOS_CPU_STACK					nasys_stack_top
-CFG_NIOS_CPU_VEC_BASE					nasys_vector_table
-CFG_NIOS_CPU_VEC_SIZE					nasys_vector_table_size
-CFG_NIOS_CPU_VEC_NUMS
-CFG_NIOS_CPU_RST_VECT					nasys_reset_address
-CFG_NIOS_CPU_DBG_CORE					nasys_debug_core
-CFG_NIOS_CPU_RAM_BASE		na_onchip_ram_64_kbytes
-CFG_NIOS_CPU_RAM_SIZE		na_onchip_ram_64_kbytes_size
-CFG_NIOS_CPU_ROM_BASE		na_boot_monitor_rom
-CFG_NIOS_CPU_ROM_SIZE		na_boot_monitor_rom_size
-CFG_NIOS_CPU_OCI_BASE					nasys_oci_core
-CFG_NIOS_CPU_OCI_SIZE
-CFG_NIOS_CPU_SRAM_BASE		na_ext_ram		nasys_program_mem
-							nasys_data_mem
-CFG_NIOS_CPU_SRAM_SIZE		na_ext_ram_size		nasys_program_mem_size
-							nasys_data_mem_size
-CFG_NIOS_CPU_SDRAM_BASE		 na_sdram
-CFG_NIOS_CPU_SDRAM_SIZE		 na_sdram_size
-CFG_NIOS_CPU_FLASH_BASE		 na_ext_flash		nasys_main_flash
-							nasys_am29lv065d_flash_0
-							nasys_flash_0
-CFG_NIOS_CPU_FLASH_SIZE	    na_ext_flash_size		nasys_main_flash_size
-
-T I M E R				N I O S	  S D K			    [3]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_TIMER_NUMS					nasys_timer_count
-CFG_NIOS_CPU_TIMER[0-9]					nasys_timer_[0-9]
-CFG_NIOS_CPU_TIMER[0-9]_IRQ				nasys_timer_[0-9]_irq
-CFG_NIOS_CPU_TIMER[0-9]_PER				[ptf]:period
-							[ptf]:period_units
-							[ptf]:mult
-CFG_NIOS_CPU_TIMER[0-9]_AR				[ptf]:always_run
-CFG_NIOS_CPU_TIMER[0-9]_FP				[ptf]:fixed_period
-CFG_NIOS_CPU_TIMER[0-9]_SS				[ptf]:snapshot
-
-U A R T					N I O S	  S D K			    [2]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_UART_NUMS					nasys_uart_count
-CFG_NIOS_CPU_UART[0-9]					nasys_uart_[0-9]
-CFG_NIOS_CPU_UART[0-9]_IRQ				nasys_uart_[0-9]_irq
-CFG_NIOS_CPU_UART[0-9]_BR				[ptf]:baud
-CFG_NIOS_CPU_UART[0-9]_DB				[ptf]:data_bits
-CFG_NIOS_CPU_UART[0-9]_SB				[ptf]:stop_bits
-CFG_NIOS_CPU_UART[0-9]_PA				[ptf]:parity
-CFG_NIOS_CPU_UART[0-9]_HS				[ptf]:use_cts_rts
-CFG_NIOS_CPU_UART[0-9]_EOP				[ptf]:use_eop_register
-
-P I O					N I O S	  S D K			    [4]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_PIO_NUMS					nasys_pio_count
-CFG_NIOS_CPU_PIO[0-9]					nasys_pio_[0-9]
-CFG_NIOS_CPU_PIO[0-9]_IRQ				nasys_pio_[0-9]_irq
-CFG_NIOS_CPU_PIO[0-9]_BITS				[ptf]:Data_Width
-CFG_NIOS_CPU_PIO[0-9]_TYPE				[ptf]:has_tri
-							[ptf]:has_out
-							[ptf]:has_in
-CFG_NIOS_CPU_PIO[0-9]_CAP				[ptf]:capture
-CFG_NIOS_CPU_PIO[0-9]_EDGE				[ptf]:edge_type
-CFG_NIOS_CPU_PIO[0-9]_ITYPE				[ptf]:irq_type
-
-S P I					N I O S	  S D K			    [6]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_SPI_NUMS					nasys_spi_count
-CFG_NIOS_CPU_SPI[0-9]					nasys_spi_[0-9]
-CFG_NIOS_CPU_SPI[0-9]_IRQ				nasys_spi_[0-9]_irq
-CFG_NIOS_CPU_SPI[0-9]_BITS				[ptf]:databits
-CFG_NIOS_CPU_SPI[0-9]_MA				[ptf]:ismaster
-CFG_NIOS_CPU_SPI[0-9]_SLN				[ptf]:numslaves
-CFG_NIOS_CPU_SPI[0-9]_TCLK				[ptf]:targetclock
-CFG_NIOS_CPU_SPI[0-9]_TDELAY				[ptf]:targetdelay
-CFG_NIOS_CPU_SPI[0-9]_*					[ptf]:*
-
-I D E					N I O S	  S D K
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_IDE_NUMS					nasys_usersocket_count
-CFG_NIOS_CPU_IDE[0-9]					nasys_usersocket_[0-9]
-
-A S M I					N I O S	  S D K			    [5]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_ASMI_NUMS					nasys_asmi_count
-CFG_NIOS_CPU_ASMI[0-9]					nasys_asmi_[0-9]
-CFG_NIOS_CPU_ASMI[0-9]_IRQ				nasys_asmi_[0-9]_irq
-
-E t h e r n e t	  ( L A N )		N I O S	  S D K
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_LAN_NUMS
-CFG_NIOS_CPU_LAN[0-9]_BASE	na_lan91c111
-CFG_NIOS_CPU_LAN[0-9]_OFFS				LAN91C111_REGISTERS_OFFSET
-CFG_NIOS_CPU_LAN[0-9]_IRQ	na_lan91c111_irq
-CFG_NIOS_CPU_LAN[0-9]_BUSW				LAN91C111_DATA_BUS_WIDTH
-CFG_NIOS_CPU_LAN[0-9]_TYPE
-
-s y s t e m   c o m p o s i n g		N I O S	  S D K
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_TICK_TIMER		(na_low_priority_timer2)
-CFG_NIOS_CPU_USER_TIMER		(na_timer1)
-CFG_NIOS_CPU_BUTTON_PIO		(na_button_pio)
-CFG_NIOS_CPU_LCD_PIO		(na_lcd_pio)
-CFG_NIOS_CPU_LED_PIO		(na_led_pio)
-CFG_NIOS_CPU_SEVENSEG_PIO	(na_seven_seg_pio)
-CFG_NIOS_CPU_RECONF_PIO		(na_reconfig_request_pio)
-CFG_NIOS_CPU_CFPRESENT_PIO	(na_cf_present_pio)
-CFG_NIOS_CPU_CFPOWER_PIO	(na_cf_power_pio)
-CFG_NIOS_CPU_CFATASEL_PIO	(na_cf_ata_select_pio)
-CFG_NIOS_CPU_USER_SPI		(na_spi)
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/ds/ds_nioscpu.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.altera.com/literature/ds/ds_nios_asmi.pdf
-[6]	http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[7]	http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.ppc440 b/doc/README.ppc440
index 2e04aba..0a5f99f 100644
--- a/doc/README.ppc440
+++ b/doc/README.ppc440
@@ -47,25 +47,25 @@
 at least review these before deciding to make any changes ... it
 will probably save you some headaches ;-)
 
-CFG_SDRAM_BASE - The virtual address where SDRAM is mapped (always 0)
+CONFIG_SYS_SDRAM_BASE - The virtual address where SDRAM is mapped (always 0)
 
-CFG_FLASH_BASE - The virtual address where FLASH is mapped.
+CONFIG_SYS_FLASH_BASE - The virtual address where FLASH is mapped.
 
-CFG_PCI_MEMBASE - The virtual address where PCI-bus memory is mapped.
+CONFIG_SYS_PCI_MEMBASE - The virtual address where PCI-bus memory is mapped.
     This mapping provides access to PCI-bus memory.
 
-CFG_PERIPHERAL_BASE - The virtual address where the 440 memory-mapped
+CONFIG_SYS_PERIPHERAL_BASE - The virtual address where the 440 memory-mapped
     peripherals are mapped. (e.g. -- UART registers, IIC registers, etc).
 
-CFG_ISRAM_BASE - The virtual address where the 440 internal SRAM is
+CONFIG_SYS_ISRAM_BASE - The virtual address where the 440 internal SRAM is
     mapped. The internal SRAM is equivalent to 405gp OCM and is used
     for the initial stack.
 
-CFG_PCI_BASE - The virtual address where the 440 PCI-x bridge config
+CONFIG_SYS_PCI_BASE - The virtual address where the 440 PCI-x bridge config
     registers are mapped.
 
-CFG_PCI_TARGBASE - The PCI address that is mapped to the virtual address
-    defined by CFG_PCI_MEMBASE.
+CONFIG_SYS_PCI_TARGBASE - The PCI address that is mapped to the virtual address
+    defined by CONFIG_SYS_PCI_MEMBASE.
 
 
 UART / SERIAL
@@ -73,7 +73,7 @@
 
 The UART port works fine when an external serial clock is provided
 (like the one on the Ebony board) and when using internal clocking.
-This is controlled with the CFG_EXT_SERIAL_CLOCK flag. When using
+This is controlled with the CONFIG_SYS_EXT_SERIAL_CLOCK flag. When using
 internal clocking, the "ideal baud rate" settings in the 440GP
 user manual are automatically calculated.
 
@@ -94,7 +94,7 @@
 CDCV850 clock controller at address 0x69 on the ebony board).
 
 To prevent probing certain addresses you can define the
-CFG_I2C_NOPROBES macro in your board-specific header file. When
+CONFIG_SYS_I2C_NOPROBES macro in your board-specific header file. When
 defined, all specified addresses are skipped during a probe.
 The addresses that are skipped will be displayed in the output
 of the iprobe command.
@@ -102,12 +102,12 @@
 For example, to prevent probing address 0x69, define the macro as
 follows:
 
-#define CFG_I2C_NOPROBES {0x69}
+#define CONFIG_SYS_I2C_NOPROBES {0x69}
 
 Similarly, to prevent probing addresses 0x69 and 0x70, define the
 macro a:
 
-#define CFG_I2C_NOPROBES {0x69, 0x70}
+#define CONFIG_SYS_I2C_NOPROBES {0x69, 0x70}
 
 
 DDR SDRAM CONTROLLER
@@ -144,7 +144,7 @@
 The cpu-specific code sets up a default pci_controller structure
 that maps in a single PCI I/O space and PCI memory space. The I/O
 space begins at PCI I/O address 0 and the PCI memory space is
-256 MB starting at PCI address CFG_PCI_TARGBASE. After the
+256 MB starting at PCI address CONFIG_SYS_PCI_TARGBASE. After the
 pci_controller structure is initialized, the cpu-specific code will
 call the routine pci_pre_init(). This routine is implemented by
 board-specific code & is where the board can over-ride/extend the
@@ -157,7 +157,7 @@
 The default 440GP PCI target configuration is minimal -- it assumes that
 the strapping registers are set as necessary. Since the strapping bits
 provide very limited flexibility, you may want to customize the boards
-target configuration. If CFG_PCI_TARGET_INIT is defined, the cpu-specific
+target configuration. If CONFIG_SYS_PCI_TARGET_INIT is defined, the cpu-specific
 code will call the routine pci_target_init() which you must implement
 in your board-specific code.
 
@@ -166,7 +166,7 @@
 that the 'enable host configuration' bit in the PCIX0_BRDGOPT2 is set.
 
 The default PCI master initialization maps in 256 MB of pci memory
-starting at PCI address CFG_PCI_MEMBASE. To customize this, define
+starting at PCI address CONFIG_SYS_PCI_MEMBASE. To customize this, define
 PCI_MASTER_INIT. This will call the routine pci_master_init() in your
 board-specific code rather than performing the default master
 initialization.
diff --git a/doc/README.serial_multi b/doc/README.serial_multi
index 40f7815..ad61d42 100644
--- a/doc/README.serial_multi
+++ b/doc/README.serial_multi
@@ -35,7 +35,7 @@
 	setenv sout serial_scc; setenv baudrate 38400
 
 After that press 'enter' at the SCC console. Note that baudrates <38400
-are not allowed on LWMON with watchdog enabled (see CFG_BAUDRATE_TABLE in
+are not allowed on LWMON with watchdog enabled (see CONFIG_SYS_BAUDRATE_TABLE in
 include/configs/lwmon.h).
 
 
diff --git a/doc/README.sha1 b/doc/README.sha1
index 7992f7f..f6cca40 100644
--- a/doc/README.sha1
+++ b/doc/README.sha1
@@ -34,7 +34,7 @@
 
 b) Initialize the SHA1 sum in the Image with 0x00
    The SHA1 sum is stored in Flash at:
-			   CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS
+			   CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + SHA1_SUM_POS
    for the pcs440ep Flash:	 0xfffa0000 +	      0x60000 +        -0x20
 			    = 0xffffffe0
    for the example in RAM:	   0x300000 +	      0x60000 +        -0x20
diff --git a/doc/README.silent b/doc/README.silent
index 6772532..a26e3df 100644
--- a/doc/README.silent
+++ b/doc/README.silent
@@ -13,7 +13,7 @@
  - When the console devices have been initialized, "stdout" and
    "stderr" are set to "nulldev", so subsequent messages are
    suppressed automatically. Make sure to enable "nulldev" by
-   #defining CFG_DEVICE_NULLDEV in your board config file.
+   #defining CONFIG_SYS_DEVICE_NULLDEV in your board config file.
 
  - When booting a linux kernel, the "bootargs" are fixed up so that
    the argument "console=" will be in the command line, no matter how
diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt
index 6185cd8..002818c 100644
--- a/doc/uImage.FIT/command_syntax_extensions.txt
+++ b/doc/uImage.FIT/command_syntax_extensions.txt
@@ -160,7 +160,7 @@
 
 When bootm is called without arguments, the image at current image address is
 booted. The current image address is the address set most recently by a load
-command, etc, and is by default equal to CFG_LOAD_ADDR. For example, consider
+command, etc, and is by default equal to CONFIG_SYS_LOAD_ADDR. For example, consider
 the following commands:
 
 tftp 200000 /tftpboot/kernel