rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
index 2c7d5a0..402188e 100644
--- a/cpu/ixp/cpu.c
+++ b/cpu/ixp/cpu.c
@@ -81,7 +81,7 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
@@ -198,7 +198,7 @@
void bootcount_store (ulong a)
{
- volatile ulong *save_addr = (volatile ulong *)(CFG_BOOTCOUNT_ADDR);
+ volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_BOOTCOUNT_ADDR);
save_addr[0] = a;
save_addr[1] = BOOTCOUNT_MAGIC;
@@ -206,7 +206,7 @@
ulong bootcount_load (void)
{
- volatile ulong *save_addr = (volatile ulong *)(CFG_BOOTCOUNT_ADDR);
+ volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_BOOTCOUNT_ADDR);
if (save_addr[1] != BOOTCOUNT_MAGIC)
return 0;
diff --git a/cpu/ixp/interrupts.c b/cpu/ixp/interrupts.c
index 84fe937..621f31b 100644
--- a/cpu/ixp/interrupts.c
+++ b/cpu/ixp/interrupts.c
@@ -40,8 +40,8 @@
*/
#define FREQ 66666666
-#define CLOCK_TICK_RATE (((FREQ / CFG_HZ & ~IXP425_OST_RELOAD_MASK) + 1) * CFG_HZ)
-#define LATCH ((CLOCK_TICK_RATE + CFG_HZ/2) / CFG_HZ) /* For divider */
+#define CLOCK_TICK_RATE (((FREQ / CONFIG_SYS_HZ & ~IXP425_OST_RELOAD_MASK) + 1) * CONFIG_SYS_HZ)
+#define LATCH ((CLOCK_TICK_RATE + CONFIG_SYS_HZ/2) / CONFIG_SYS_HZ) /* For divider */
struct _irq_handler {
void *m_data;
diff --git a/cpu/ixp/npe/include/npe.h b/cpu/ixp/npe/include/npe.h
index e53458d..3d6f727 100644
--- a/cpu/ixp/npe/include/npe.h
+++ b/cpu/ixp/npe/include/npe.h
@@ -27,10 +27,10 @@
/*
* defines...
*/
-#define CFG_NPE_NUMS 1
+#define CONFIG_SYS_NPE_NUMS 1
#ifdef CONFIG_HAS_ETH1
-#undef CFG_NPE_NUMS
-#define CFG_NPE_NUMS 2
+#undef CONFIG_SYS_NPE_NUMS
+#define CONFIG_SYS_NPE_NUMS 2
#endif
#define NPE_NUM_PORTS 3
diff --git a/cpu/ixp/npe/npe.c b/cpu/ixp/npe/npe.c
index 892096b..bd77fed 100644
--- a/cpu/ixp/npe/npe.c
+++ b/cpu/ixp/npe/npe.c
@@ -51,7 +51,7 @@
static int npe_used[NPE_NUM_PORTS];
/* A little extra so we can align to cacheline. */
-static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CFG_CACHELINE_SIZE - 1];
+static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CONFIG_SYS_CACHELINE_SIZE - 1];
static u8 *npe_alloc_end;
static u8 *npe_alloc_free;
@@ -60,7 +60,7 @@
static int count = 0;
void *p = NULL;
- size = (size + (CFG_CACHELINE_SIZE-1)) & ~(CFG_CACHELINE_SIZE-1);
+ size = (size + (CONFIG_SYS_CACHELINE_SIZE-1)) & ~(CONFIG_SYS_CACHELINE_SIZE-1);
count++;
if ((npe_alloc_free + size) < npe_alloc_end) {
@@ -399,7 +399,7 @@
npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool);
npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +
- CFG_CACHELINE_SIZE - 1) & ~(CFG_CACHELINE_SIZE - 1));
+ CONFIG_SYS_CACHELINE_SIZE - 1) & ~(CONFIG_SYS_CACHELINE_SIZE - 1));
/* initialize mbuf pool */
init_rx_mbufs(p_npe);
@@ -568,7 +568,7 @@
int eth_num = 0;
struct npe *p_npe = NULL;
- for (eth_num = 0; eth_num < CFG_NPE_NUMS; eth_num++) {
+ for (eth_num = 0; eth_num < CONFIG_SYS_NPE_NUMS; eth_num++) {
/* See if we can actually bring up the interface, otherwise, skip it */
switch (eth_num) {
@@ -673,8 +673,8 @@
npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool);
npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +
- CFG_CACHELINE_SIZE - 1)
- & ~(CFG_CACHELINE_SIZE - 1));
+ CONFIG_SYS_CACHELINE_SIZE - 1)
+ & ~(CONFIG_SYS_CACHELINE_SIZE - 1));
if (!npe_csr_load())
return 0;
diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c
index 4549631..dd26af4 100644
--- a/cpu/ixp/serial.c
+++ b/cpu/ixp/serial.c
@@ -43,7 +43,7 @@
void serial_setbrg (void)
{
unsigned int quot = 0;
- int uart = CFG_IXP425_CONSOLE;
+ int uart = CONFIG_SYS_IXP425_CONSOLE;
if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0))
quot = SERIAL_CLOCK / gd->baudrate;
@@ -85,9 +85,9 @@
void serial_putc (const char c)
{
/* wait for room in the tx FIFO on UART */
- while ((LSR(CFG_IXP425_CONSOLE) & LSR_TEMT) == 0);
+ while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0);
- THR(CFG_IXP425_CONSOLE) = c;
+ THR(CONFIG_SYS_IXP425_CONSOLE) = c;
/* If \n, also do \r */
if (c == '\n')
@@ -101,7 +101,7 @@
*/
int serial_tstc (void)
{
- return LSR(CFG_IXP425_CONSOLE) & LSR_DR;
+ return LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR;
}
/*
@@ -111,9 +111,9 @@
*/
int serial_getc (void)
{
- while (!(LSR(CFG_IXP425_CONSOLE) & LSR_DR));
+ while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR));
- return (char) RBR(CFG_IXP425_CONSOLE) & 0xff;
+ return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
}
void
diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S
index d4c8e33..196ba5d 100644
--- a/cpu/ixp/start.S
+++ b/cpu/ixp/start.S
@@ -154,7 +154,7 @@
CPWAIT r0
/* set EXP CS0 to the optimum timing */
- ldr r1, =CFG_EXP_CS0
+ ldr r1, =CONFIG_SYS_EXP_CS0
ldr r2, =IXP425_EXP_CS0
str r1, [r2]
@@ -165,7 +165,7 @@
orr r1, r1, #0x80000000
str r1, [r2]
#endif
- mov r1, #CFG_SDR_CONFIG
+ mov r1, #CONFIG_SYS_SDR_CONFIG
ldr r2, =IXP425_SDR_CONFIG
str r1, [r2]
@@ -181,7 +181,7 @@
DELAY_FOR 0x4000, r0
/* set SDRAM internal refresh val */
- ldr r1, =CFG_SDRAM_REFRESH_CNT
+ ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
str r1, [r3]
DELAY_FOR 0x4000, r0
@@ -199,7 +199,7 @@
bne 111b
/* set mode register in sdram */
- mov r1, #CFG_SDR_MODE_CONFIG
+ mov r1, #CONFIG_SYS_SDR_MODE_CONFIG
str r1, [r4]
DELAY_FOR 0x4000, r0
@@ -211,7 +211,7 @@
/* copy */
mov r0, #0
mov r4, r0
- add r2, r0, #CFG_MONITOR_LEN
+ add r2, r0, #CONFIG_SYS_MONITOR_LEN
mov r1, #0x10000000
mov r5, r1
@@ -283,8 +283,8 @@
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
@@ -345,8 +345,8 @@
add r8, sp, #S_PC
ldr r2, _armboot_start
- sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+ sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
@@ -382,8 +382,8 @@
.macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack
- sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+ sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+ sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
str lr, [r13] @ save caller lr / spsr
mrs lr, spsr
diff --git a/cpu/ixp/timer.c b/cpu/ixp/timer.c
index 920f34e..09d8ad5 100644
--- a/cpu/ixp/timer.c
+++ b/cpu/ixp/timer.c
@@ -44,7 +44,7 @@
* This function has a max usec, but since it is called from udelay
* we should not have to worry... be happy
*/
- unsigned long usecs = CFG_HZ/1000000L & ~IXP425_OST_RELOAD_MASK;
+ unsigned long usecs = CONFIG_SYS_HZ/1000000L & ~IXP425_OST_RELOAD_MASK;
*IXP425_OSST = IXP425_OSST_TIMER_1_PEND;
usecs |= IXP425_OST_ONE_SHOT | IXP425_OST_ENABLE;