rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/netstar/flash.c b/board/netstar/flash.c
index 692c416..e9eca35 100644
--- a/board/netstar/flash.c
+++ b/board/netstar/flash.c
@@ -33,11 +33,11 @@
#include "crcek.h"
-#if (CFG_MAX_FLASH_BANKS > 1)
+#if (CONFIG_SYS_MAX_FLASH_BANKS > 1)
#error There is always only _one_ flash chip
#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
#define CMD_READ_ARRAY 0x000000f0
#define CMD_UNLOCK1 0x000000aa
@@ -47,8 +47,8 @@
#define CMD_PROGRAM 0x000000a0
#define CMD_UNLOCK_BYPASS 0x00000020
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002aa << 1)))
+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002aa << 1)))
#define BIT_ERASE_DONE 0x00000080
#define BIT_RDY_MASK 0x00000080
@@ -65,27 +65,27 @@
flash_info[0].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_LV800B & FLASH_TYPEMASK);
flash_info[0].size = PHYS_FLASH_1_SIZE;
- flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset(flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
for (i = 0; i < flash_info[0].sector_count; i++) {
switch (i) {
case 0: /* 16kB */
- flash_info[0].start[0] = CFG_FLASH_BASE;
+ flash_info[0].start[0] = CONFIG_SYS_FLASH_BASE;
break;
case 1: /* 8kB */
- flash_info[0].start[1] = CFG_FLASH_BASE + 0x4000;
+ flash_info[0].start[1] = CONFIG_SYS_FLASH_BASE + 0x4000;
break;
case 2: /* 8kB */
- flash_info[0].start[2] = CFG_FLASH_BASE + 0x4000 +
+ flash_info[0].start[2] = CONFIG_SYS_FLASH_BASE + 0x4000 +
0x2000;
break;
case 3: /* 32 KB */
- flash_info[0].start[3] = CFG_FLASH_BASE + 0x4000 +
+ flash_info[0].start[3] = CONFIG_SYS_FLASH_BASE + 0x4000 +
2 * 0x2000;
break;
case 4:
- flash_info[0].start[4] = CFG_FLASH_BASE + 0x4000 +
+ flash_info[0].start[4] = CONFIG_SYS_FLASH_BASE + 0x4000 +
2 * 0x2000 + 0x8000;
break;
default: /* 64kB */
@@ -196,7 +196,7 @@
result = *addr;
/* check timeout */
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
rc = ERR_TIMOUT;
break;
@@ -254,7 +254,7 @@
result = *addr;
/* check timeout */
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
rc = ERR_TIMOUT;
break;
}