rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
index 090a534..66acc41 100644
--- a/board/freescale/mpc8266ads/mpc8266ads.c
+++ b/board/freescale/mpc8266ads/mpc8266ads.c
@@ -224,7 +224,7 @@
void reset_phy(void)
{
- volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR;
+ volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
/* reset the FEC port */
bcsr->bcsr1 &= ~FETH_RST;
@@ -234,8 +234,8 @@
int board_early_init_f (void)
{
- volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR;
- volatile pci_ic_t *pci_ic = (pci_ic_t *) CFG_PCI_INT;
+ volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
+ volatile pci_ic_t *pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
@@ -254,17 +254,17 @@
phys_size_t initdram(int board_type)
{
/* Autoinit part stolen from board/sacsng/sacsng.c */
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar c = 0xff;
- volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
- uint psdmr = CFG_PSDMR;
+ volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
+ uint psdmr = CONFIG_SYS_PSDMR;
int i;
uint psrt = 0x21; /* for no SPD */
uint chipselects = 1; /* for no SPD */
- uint sdram_size = CFG_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
- uint or = CFG_OR2_PRELIM; /* for no SPD */
+ uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
+ uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */
uint data_width;
uint rows;
uint banks;
@@ -286,7 +286,7 @@
/*
* Read the SDRAM SPD EEPROM via I2C.
*/
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
spd_size = data;
@@ -506,13 +506,13 @@
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_psrt = psrt;
- memctl->memc_br2 = CFG_BR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
memctl->memc_or2 = or;
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
@@ -536,7 +536,7 @@
{
ramaddr += sdram_size;
- memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
memctl->memc_or3 = or;
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;