rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 8bc40d5..dcab906 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -36,12 +36,12 @@
* Setup GPIO pins
*/
cntrl0Reg = mfdcr(cntrl0);
- mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5));
+ mtdcr(cntrl0, cntrl0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
/* set output pins to high */
- out32(GPIO0_OR, CFG_EEPROM_WP);
+ out32(GPIO0_OR, CONFIG_SYS_EEPROM_WP);
/* setup for output (LED=off) */
- out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED);
+ out32(GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
@@ -108,7 +108,7 @@
return 0;
}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
* 0: disable write
@@ -118,23 +118,23 @@
* 0/1: current state if <state> was -1.
*/
int eeprom_write_enable (unsigned dev_addr, int state) {
- if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
return -1;
} else {
switch (state) {
case 1:
/* Enable write access, clear bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+ out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+ state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
break;
}
}
@@ -142,7 +142,7 @@
}
#endif
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int query = argc == 1;
@@ -150,21 +150,21 @@
if (query) {
/* Query write access state. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts ("Query of write access state failed.\n");
} else {
printf ("Write access for device 0x%0x is %sabled.\n",
- CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
} else {
if ('0' == argv[1][0]) {
/* Disable write access. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
} else {
/* Enable write access. */
- state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+ state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
}
if (state < 0) {
puts ("Setup of write access state failed.\n");
@@ -179,4 +179,4 @@
"eepwren - Enable / disable / query EEPROM write access\n",
NULL
);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */