rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/amcc/luan/config.mk b/board/amcc/luan/config.mk
index f52c206..cd02aab 100644
--- a/board/amcc/luan/config.mk
+++ b/board/amcc/luan/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/luan/flash.c b/board/amcc/luan/flash.c
index d28bf9d..2d3b154 100644
--- a/board/amcc/luan/flash.c
+++ b/board/amcc/luan/flash.c
@@ -42,7 +42,7 @@
#define DEBUGF(x...)
#endif /* DEBUG */
-static unsigned long flash_addr_table[1][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[1][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0xff900000, 0xff980000, 0xffc00000}, /* 0:000: configuraton 3 */
};
@@ -59,7 +59,7 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
unsigned short index = 0;
int i;
@@ -69,7 +69,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -92,8 +92,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[2]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
index d5ee117d..fb54dea 100644
--- a/board/amcc/luan/init.S
+++ b/board/amcc/luan/init.S
@@ -54,7 +54,7 @@
tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
/*
* TLB entries for SDRAM are not needed on this platform.
@@ -63,12 +63,12 @@
*/
/* internal ram (l2 cache) */
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
/* peripherals at f0000000 */
- tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
/* PCI */
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index b14b6e1..b28ebf9 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -30,7 +30,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*************************************************************************
@@ -80,7 +80,7 @@
************************************************************************/
int misc_init_r(void)
{
- volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
+ volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE;
/* set modes of operation */
x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
@@ -166,7 +166,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
@@ -181,7 +181,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
@@ -190,12 +190,12 @@
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************