Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
diff --git a/board/lpc2292sodimm/mmc_hw.c b/board/lpc2292sodimm/mmc_hw.c
new file mode 100644
index 0000000..0b5ddf9
--- /dev/null
+++ b/board/lpc2292sodimm/mmc_hw.c
@@ -0,0 +1,233 @@
+/*
+ This code was original written by Ulrich Radig and modified by
+ Embedded Artists AB (www.embeddedartists.com).
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include "spi.h"
+
+#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
+#define MMC_Disable() PUT32(IO1SET, 1l << 22)
+#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
+
+static unsigned char Write_Command_MMC (unsigned char *CMD);
+static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
+ unsigned short int Bytes);
+
+/* initialize the hardware */
+int mmc_hw_init(void)
+{
+ unsigned long a;
+ unsigned short int Timeout = 0;
+ unsigned char b;
+ unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
+
+ /* set-up GPIO and SPI */
+ (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
+ (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
+
+ MMC_Disable();
+
+ spi_lock();
+ spi_set_clock(248);
+ spi_set_cfg(0, 1, 0);
+ MMC_Enable();
+
+ /* waste some time */
+ for(a=0; a < 20000; a++)
+ asm("nop");
+
+ /* Put the MMC/SD-card into SPI-mode */
+ for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
+ spi_write(0xff);
+
+ /* Sends command CMD0 to MMC/SD-card */
+ while (Write_Command_MMC(CMD) != 1) {
+ if (Timeout++ > 200) {
+ MMC_Disable();
+ spi_unlock();
+ return(1); /* Abort with command 1 (return 1) */
+ }
+ }
+ /* Sends Command CMD1 an MMC/SD-card */
+ Timeout = 0;
+ CMD[0] = 0x41;/* Command 1 */
+ CMD[5] = 0xFF;
+
+ while (Write_Command_MMC(CMD) != 0) {
+ if (Timeout++ > 200) {
+ MMC_Disable();
+ spi_unlock();
+ return (2); /* Abort with command 2 (return 2) */
+ }
+ }
+
+ MMC_Disable();
+ spi_unlock();
+
+ return 0;
+}
+
+/* ############################################################################
+ Sends a command to the MMC/SD-card
+ ######################################################################### */
+static unsigned char Write_Command_MMC (unsigned char *CMD)
+{
+ unsigned char a, tmp = 0xff;
+ unsigned short int Timeout = 0;
+
+ MMC_Disable();
+ spi_write(0xFF);
+ MMC_Enable();
+
+ for (a = 0; a < 0x06; a++)
+ spi_write(*CMD++);
+
+ while (tmp == 0xff) {
+ tmp = spi_read();
+ if (Timeout++ > 5000)
+ break;
+ }
+
+ return (tmp);
+}
+
+/* ############################################################################
+ Routine to read the CID register from the MMC/SD-card (16 bytes)
+ ######################################################################### */
+void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
+ int Bytes)
+{
+ unsigned short int a;
+
+ spi_lock();
+ mmc_spi_cfg();
+ MMC_Enable();
+
+ if (Write_Command_MMC(CMD) != 0) {
+ MMC_Disable();
+ spi_unlock();
+ return;
+ }
+
+ while (spi_read() != 0xfe) {};
+ for (a = 0; a < Bytes; a++)
+ *Buffer++ = spi_read();
+
+ /* Read the CRC-byte */
+ spi_read(); /* CRC - byte is discarded */
+ spi_read(); /* CRC - byte is discarded */
+ /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
+ MMC_Disable();
+ spi_unlock();
+
+ return;
+}
+
+/* ############################################################################
+ Routine to read a block (512 bytes) from the MMC/SD-card
+ ######################################################################### */
+unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
+{
+ /* Command 16 to read aBlocks from the MMC/SD - caed */
+ unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
+
+ /* The addres on the MMC/SD-card is in bytes,
+ addr is transformed from blocks to bytes and the result is
+ placed into the command */
+
+ addr = addr << 9; /* addr = addr * 512 */
+
+ CMD[1] = ((addr & 0xFF000000) >> 24);
+ CMD[2] = ((addr & 0x00FF0000) >> 16);
+ CMD[3] = ((addr & 0x0000FF00) >> 8 );
+
+ MMC_Read_Block(CMD, Buffer, 512);
+
+ return (0);
+}
+
+/* ############################################################################
+ Routine to write a block (512 byte) to the MMC/SD-card
+ ######################################################################### */
+unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
+{
+ unsigned char tmp, a;
+ unsigned short int b;
+ /* Command 24 to write a block to the MMC/SD - card */
+ unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
+
+ /* The addres on the MMC/SD-card is in bytes,
+ addr is transformed from blocks to bytes and the result is
+ placed into the command */
+
+ addr = addr << 9; /* addr = addr * 512 */
+
+ CMD[1] = ((addr & 0xFF000000) >> 24);
+ CMD[2] = ((addr & 0x00FF0000) >> 16);
+ CMD[3] = ((addr & 0x0000FF00) >> 8 );
+
+ spi_lock();
+ mmc_spi_cfg();
+ MMC_Enable();
+
+ /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
+ tmp = Write_Command_MMC(CMD);
+ if (tmp != 0) {
+ MMC_Disable();
+ spi_unlock();
+ return(tmp);
+ }
+
+ /* Do a short delay and send a clock-pulse to the MMC/SD-card */
+ for (a = 0; a < 100; a++)
+ spi_read();
+
+ /* Send a start byte to the MMC/SD-card */
+ spi_write(0xFE);
+
+ /* Write the block (512 bytes) to the MMC/SD-card */
+ for (b = 0; b < 512; b++)
+ spi_write(*Buffer++);
+
+ /* write the CRC-Byte */
+ spi_write(0xFF); /* write a dummy CRC */
+ spi_write(0xFF); /* CRC code is not used */
+
+ /* Wait for MMC/SD-card busy */
+ while (spi_read() != 0xff) {};
+
+ /* set MMC_Chip_Select to high (MMC/SD-card inactive) */
+ MMC_Disable();
+ spi_unlock();
+ return (0);
+}
+
+/* #########################################################################
+ Routine to read the CSD register from the MMC/SD-card (16 bytes)
+ ######################################################################### */
+unsigned char mmc_read_csd (unsigned char *Buffer)
+{
+ /* Command to read the CSD register */
+ unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
+
+ MMC_Read_Block(CMD, Buffer, 16);
+
+ return (0);
+}