diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index c127f6c..9cafcea 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -83,8 +83,12 @@
 #ifdef CONFIG_FACTORYSET
 	factoryset_read_eeprom(CONFIG_SYS_I2C_EEPROM_ADDR);
 #endif
+
 	gpmc_init();
 
+#ifdef CONFIG_NAND_CS_INIT
+	board_nand_cs_init();
+#endif
 #ifdef CONFIG_VIDEO
 	board_video_init();
 #endif
diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig
index 819d187..a699c7d 100644
--- a/board/siemens/draco/Kconfig
+++ b/board/siemens/draco/Kconfig
@@ -45,3 +45,19 @@
 	default "rastaban"
 
 endif
+
+if TARGET_ETAMIN
+
+config SYS_BOARD
+        default "draco"
+
+config SYS_VENDOR
+        default "siemens"
+
+config SYS_SOC
+        default "am33xx"
+
+config SYS_CONFIG_NAME
+        default "etamin"
+
+endif
diff --git a/board/siemens/draco/MAINTAINERS b/board/siemens/draco/MAINTAINERS
index 484dd73..e9107f0 100644
--- a/board/siemens/draco/MAINTAINERS
+++ b/board/siemens/draco/MAINTAINERS
@@ -4,6 +4,7 @@
 F:	board/siemens/draco/
 F:	include/configs/draco.h
 F:	configs/draco_defconfig
+F:	configs/etamin_defconfig
 F:	include/configs/thuban.h
 F:	configs/thuban_defconfig
 F:	include/configs/rastaban.h
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index 41bdef0..d8869a0 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -24,6 +24,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
 #include <asm/io.h>
 #include <asm/emif.h>
 #include <asm/gpio.h>
@@ -33,6 +34,7 @@
 #include <watchdog.h>
 #include "board.h"
 #include "../common/factoryset.h"
+#include <nand.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -40,6 +42,7 @@
 static struct draco_baseboard_id __attribute__((section(".data"))) settings;
 
 #if DDR_PLL_FREQ == 303
+#if !defined(CONFIG_TARGET_ETAMIN)
 /* Default@303MHz-i0 */
 const struct ddr3_data ddr3_default = {
 	0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
@@ -48,6 +51,16 @@
 	"default name @303MHz           \0",
 	"default marking                \0",
 };
+#else
+/* etamin board */
+const struct ddr3_data ddr3_default = {
+	0x33524444, 0x56312e36, 0x0080, 0x0000, 0x003A, 0x0010, 0x009F,
+	0x0050, 0x0888A39B, 0x266D7FDA, 0x501F86AF, 0x00100206, 0x61A44BB2,
+	0x0000093B, 0x0000018A,
+	"test-etamin                    \0",
+	"generic-8Gbit                  \0",
+};
+#endif
 #elif DDR_PLL_FREQ == 400
 /* Default@400MHz-i0 */
 const struct ddr3_data ddr3_default = {
@@ -210,6 +223,7 @@
 	draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
 		settings.ddr3.emif_ddr_phy_ctlr_1;
 	draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
+	draco_ddr3_emif_reg_data.sdram_config2 = 0x08000000;
 	draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
 
 	draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
@@ -251,6 +265,10 @@
 
 	nand_curr_device = 0;
 	omap_nand_switch_ecc(1, ecc_type);
+#ifdef CONFIG_TARGET_ETAMIN
+	nand_curr_device = 1;
+	omap_nand_switch_ecc(1, ecc_type);
+#endif
 #ifdef CONFIG_FACTORYSET
 	/* Set ASN in environment*/
 	if (factory_dat.asn[0] != 0) {
@@ -326,7 +344,7 @@
 }
 
 static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc,
-			   char *const argv[])
+			  char *const argv[])
 {
 	/* Reset SMSC LAN9303 switch for default configuration */
 	gpio_request(GPIO_LAN9303_NRST, "nRST");
@@ -346,4 +364,23 @@
 #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
 
+#ifdef CONFIG_NAND_CS_INIT
+/* GPMC definitions for second nand cs1 */
+static const u32 gpmc_nand_config[] = {
+	ETAMIN_NAND_GPMC_CONFIG1,
+	ETAMIN_NAND_GPMC_CONFIG2,
+	ETAMIN_NAND_GPMC_CONFIG3,
+	ETAMIN_NAND_GPMC_CONFIG4,
+	ETAMIN_NAND_GPMC_CONFIG5,
+	ETAMIN_NAND_GPMC_CONFIG6,
+	/*CONFIG7- computed as params */
+};
+
+static void board_nand_cs_init(void)
+{
+	enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1],
+			      0x18000000, GPMC_SIZE_16M);
+}
+#endif
+
 #include "../common/board.c"
diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c
index dbcc80b..38a484e 100644
--- a/board/siemens/draco/mux.c
+++ b/board/siemens/draco/mux.c
@@ -51,6 +51,7 @@
 	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
 	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
 	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
+	{OFFSET(gpmc_csn1), MODE(0) | PULLUDEN | PULLUP_EN},    /* NAND_CS1 */
 	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
 	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
 	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
@@ -68,7 +69,6 @@
 	{OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y3 GPIO2_28*/
 	{OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y7 GPIO2_27*/
 	/* Triacs initial HW Rev */
-	{OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_30 Y0 */
 	{OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_28 Y1 */
 	{OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_31 Y2 */
 	{OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS},	/* 0_11 Y3 */