imx8ulp_evk: enable binman support
Enable binman support and add documentation for the
imx8ul-evk board.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
diff --git a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
index 608bde3..f67fe16 100644
--- a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2021 NXP
*/
+#include "imx8ulp-u-boot.dtsi"
+
/ {
mu@27020000 {
compatible = "fsl,imx8ulp-mu";
diff --git a/arch/arm/mach-imx/imx8ulp/Kconfig b/arch/arm/mach-imx/imx8ulp/Kconfig
index 49ea252..fbca241 100644
--- a/arch/arm/mach-imx/imx8ulp/Kconfig
+++ b/arch/arm/mach-imx/imx8ulp/Kconfig
@@ -23,6 +23,7 @@
config TARGET_IMX8ULP_EVK
bool "imx8ulp_evk"
+ select BINMAN
select IMX8ULP
select SUPPORT_SPL
select IMX8ULP_DRAM
diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig
index b302df1..0f0748b 100644
--- a/configs/imx8ulp_evk_defconfig
+++ b/configs/imx8ulp_evk_defconfig
@@ -8,7 +8,7 @@
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x400000
-CONFIG_IMX_CONFIG=""
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx8ulp/imximage.cfg"
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8ulp-evk"
CONFIG_SPL_TEXT_BASE=0x22020000
@@ -38,6 +38,7 @@
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx8ulp/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
diff --git a/doc/board/nxp/imx8ulp_evk.rst b/doc/board/nxp/imx8ulp_evk.rst
new file mode 100644
index 0000000..a9f5546
--- /dev/null
+++ b/doc/board/nxp/imx8ulp_evk.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8ulp_evk
+=======================
+
+U-Boot for the NXP i.MX 8ULP EVK board
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the uPower firmware
+- Get the M33 firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.10
+
+.. code-block:: bash
+
+ $ unset LDFLAGS
+ $ make PLAT=imx8ulp bl31
+ $ cp build/imx8ulp/release/bl31.bin $(srctree)
+
+Get the uPower firmware
+-----------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-upower-1.3.1.bin
+ $ chmod +x firmware-upower-1.3.1.bin
+ $ ./firmware-upower-1.3.1.bin
+ $ cp firmware-upower-1.3.1/upower_a1.bin $(srctree)/upower.bin
+
+Get the M33 firmware
+--------------------
+
+.. code-block:: bash
+
+ $ wget http://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx8ulp-m33-demo-2.14.1.bin
+ $ chmod +x imx8ulp-m33-demo-2.14.1.bin
+ $ ./imx8ulp-m33-demo-2.14.1.bin
+ $ cp imx8ulp-m33-demo-2.14.1/imx8ulp_m33_TCM_power_mode_switch.bin $(srctree)/m33_image.bin
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-0.1.2-4ed450a.bin
+ $ chmod +x firmware-ele-imx-0.1.2-4ed450a.bin
+ $ ./firmware-ele-imx-0.1.2-4ed450a.bin
+ $ cp firmware-ele-imx-0.1.2-4ed450a/mx8ulpa2-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-poky-linux-
+ $ make imx8ulp_evk_defconfig
+ $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+ $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst
index 9468773..5f1e878 100644
--- a/doc/board/nxp/index.rst
+++ b/doc/board/nxp/index.rst
@@ -11,6 +11,7 @@
imx8mp_evk
imx8mq_evk
imx8qxp_mek
+ imx8ulp_evk
imx93_11x11_evk
imxrt1020-evk
imxrt1050-evk