sysreset: Add TI System Control Interface (TI SCI) sysreset driver
Devices from the TI K3 family of SoCs like the AM654x contain a Device
Management and Security Controller (SYSFW) that manages the low-level
device control (like clocks, resets etc) for the various hardware
modules present on the SoC. These device control operations are provided
to the host processor OS through a communication protocol called the TI
System Control Interface (TI SCI) protocol.
This patch adds a system reset driver that communicates to the system
controller over the TI SCI protocol for allowing to perform a system-
wide SoC reset.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/doc/device-tree-bindings/sysreset/ti,sci-sysreset.txt b/doc/device-tree-bindings/sysreset/ti,sci-sysreset.txt
new file mode 100644
index 0000000..02704c6
--- /dev/null
+++ b/doc/device-tree-bindings/sysreset/ti,sci-sysreset.txt
@@ -0,0 +1,29 @@
+Texas Instruments TI SCI System Reset Controller
+================================================
+
+Some TI SoCs contain a system controller (like the SYSFW, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI SCI [1].
+
+[1] http://processors.wiki.ti.com/index.php/TISCI
+
+System Reset Controller Node
+============================
+The sysreset controller node represents the reset for the overall SoC
+which is managed by the SYSFW. Because this relies on the TI SCI protocol
+to communicate with the SYSFW it must be a child of the sysfw node.
+
+Required Properties:
+--------------------
+ - compatible: Must be "ti,sci-sysreset"
+
+Example (AM65x):
+----------------
+ sysfw: sysfw {
+ compatible = "ti,am654-system-controller";
+ ...
+ k3_sysreset: sysreset-controller {
+ compatible = "ti,sci-sysreset";
+ };
+ };