diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 07e0848..15aea98 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -108,6 +108,61 @@
 /* this must be aligned to a 256 byte boundary */
 struct ohci_hcca ghcca[1];
 
+/* mapping of the OHCI CC status to error codes */
+static int cc_to_error[16] = {
+	/* No  Error  */	       0,
+	/* CRC Error  */	       USB_ST_CRC_ERR,
+	/* Bit Stuff  */	       USB_ST_BIT_ERR,
+	/* Data Togg  */	       USB_ST_CRC_ERR,
+	/* Stall      */	       USB_ST_STALLED,
+	/* DevNotResp */	       -1,
+	/* PIDCheck   */	       USB_ST_BIT_ERR,
+	/* UnExpPID   */	       USB_ST_BIT_ERR,
+	/* DataOver   */	       USB_ST_BUF_ERR,
+	/* DataUnder  */	       USB_ST_BUF_ERR,
+	/* reservd    */	       -1,
+	/* reservd    */	       -1,
+	/* BufferOver */	       USB_ST_BUF_ERR,
+	/* BuffUnder  */	       USB_ST_BUF_ERR,
+	/* Not Access */	       -1,
+	/* Not Access */	       -1
+};
+
+static const char *cc_to_string[16] = {
+	"No Error",
+	"CRC: Last data packet from endpoint contained a CRC error.",
+	"BITSTUFFING: Last data packet from endpoint contained a bit " \
+		     "stuffing violation",
+	"DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
+		     "that did not match the expected value.",
+	"STALL: TD was moved to the Done Queue because the endpoint returned" \
+		     " a STALL PID",
+	"DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
+		     "not provide a handshake (OUT)",
+	"PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
+		     "(IN) or handshake (OUT)",
+	"UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
+		     "value is not defined.",
+	"DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
+		     "either the size of the maximum data packet allowed\n" \
+		     "from the endpoint (found in MaximumPacketSize field\n" \
+		     "of ED) or the remaining buffer size.",
+	"DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
+		     "and that amount was not sufficient to fill the\n" \
+		     "specified buffer",
+	"reserved1",
+	"reserved2",
+	"BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
+		     "than it could be written to system memory",
+	"BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
+		     "system memory fast enough to keep up with data USB " \
+		     "data rate.",
+	"NOT ACCESSED: This code is set by software before the TD is placed" \
+		     "on a list to be processed by the HC.(1)",
+	"NOT ACCESSED: This code is set by software before the TD is placed" \
+		     "on a list to be processed by the HC.(2)",
+};
+
 static inline u32 roothub_a(struct ohci *hc)
 	{ return ohci_readl(&hc->regs->roothub.a); }
 static inline u32 roothub_b(struct ohci *hc)
@@ -123,6 +178,37 @@
 			  unsigned long pipe, void *buffer, int transfer_len,
 			  struct devrequest *setup, urb_priv_t *urb,
 			  int interval);
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev,
+		       unsigned long pipe, int interval, int load);
+
+/*-------------------------------------------------------------------------*/
+
+/* TDs ... */
+static struct td *td_alloc(ohci_dev_t *ohci_dev, struct usb_device *usb_dev)
+{
+	int i;
+	struct td *td;
+
+	td = NULL;
+	for (i = 0; i < NUM_TD; i++)
+	{
+		if (ohci_dev->tds[i].usb_dev == NULL)
+		{
+			td = &ohci_dev->tds[i];
+			td->usb_dev = usb_dev;
+			break;
+		}
+	}
+
+	return td;
+}
+
+static inline void ed_free(struct ed *ed)
+{
+	ed->usb_dev = NULL;
+}
 
 /*-------------------------------------------------------------------------*
  * URB support functions
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 96a0ac1..24f5e4e 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -25,64 +25,7 @@
 int usb_cpu_stop(void);
 int usb_cpu_init_fail(void);
 
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
-	/* No  Error  */	       0,
-	/* CRC Error  */	       USB_ST_CRC_ERR,
-	/* Bit Stuff  */	       USB_ST_BIT_ERR,
-	/* Data Togg  */	       USB_ST_CRC_ERR,
-	/* Stall      */	       USB_ST_STALLED,
-	/* DevNotResp */	       -1,
-	/* PIDCheck   */	       USB_ST_BIT_ERR,
-	/* UnExpPID   */	       USB_ST_BIT_ERR,
-	/* DataOver   */	       USB_ST_BUF_ERR,
-	/* DataUnder  */	       USB_ST_BUF_ERR,
-	/* reservd    */	       -1,
-	/* reservd    */	       -1,
-	/* BufferOver */	       USB_ST_BUF_ERR,
-	/* BuffUnder  */	       USB_ST_BUF_ERR,
-	/* Not Access */	       -1,
-	/* Not Access */	       -1
-};
-
-static const char *cc_to_string[16] = {
-	"No Error",
-	"CRC: Last data packet from endpoint contained a CRC error.",
-	"BITSTUFFING: Last data packet from endpoint contained a bit " \
-		     "stuffing violation",
-	"DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
-		     "that did not match the expected value.",
-	"STALL: TD was moved to the Done Queue because the endpoint returned" \
-		     " a STALL PID",
-	"DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
-		     "not provide a handshake (OUT)",
-	"PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
-		     "(IN) or handshake (OUT)",
-	"UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
-		     "value is not defined.",
-	"DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
-		     "either the size of the maximum data packet allowed\n" \
-		     "from the endpoint (found in MaximumPacketSize field\n" \
-		     "of ED) or the remaining buffer size.",
-	"DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
-		     "and that amount was not sufficient to fill the\n" \
-		     "specified buffer",
-	"reserved1",
-	"reserved2",
-	"BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
-		     "than it could be written to system memory",
-	"BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
-		     "system memory fast enough to keep up with data USB " \
-		     "data rate.",
-	"NOT ACCESSED: This code is set by software before the TD is placed" \
-		     "on a list to be processed by the HC.(1)",
-	"NOT ACCESSED: This code is set by software before the TD is placed" \
-		     "on a list to be processed by the HC.(2)",
-};
-
 /* ED States */
-
 #define ED_NEW		0x00
 #define ED_UNLINK	0x01
 #define ED_OPER		0x02
@@ -450,39 +393,3 @@
 
 	const char	*slot_name;
 } ohci_t;
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev,
-		       unsigned long pipe, int interval, int load);
-
-/*-------------------------------------------------------------------------*/
-
-/* TDs ... */
-static inline struct td *
-td_alloc (ohci_dev_t *ohci_dev, struct usb_device *usb_dev)
-{
-	int i;
-	struct td	*td;
-
-	td = NULL;
-	for (i = 0; i < NUM_TD; i++)
-	{
-		if (ohci_dev->tds[i].usb_dev == NULL)
-		{
-			td = &ohci_dev->tds[i];
-			td->usb_dev = usb_dev;
-			break;
-		}
-	}
-
-	return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
-	ed->usb_dev = NULL;
-}