Patch by Yuli Barcohen, 22 Aug 2004:
- remove ZPC.1900 board-specific flash driver;
switch the port to generic CFI driver;
- port clean-up
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index d3c8eb9..6857973 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2003 Arabella Software Ltd.
+ * Copyright (C) 2003-2004 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* U-Boot configuration for Zephyr Engineering ZPC.1900 board.
@@ -33,7 +33,7 @@
#undef DEBUG
-#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */
+#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */
/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */
#define CONFIG_ENV_OVERWRITE
@@ -81,25 +81,25 @@
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-#endif /* CONFIG_ETHER_INDEX */
+#endif /* CONFIG_ETHER_INDEX */
#define CONFIG_MII /* MII PHY management */
#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
/*
* GPIO pins used for bit-banged MII communications
*/
-#define MDIO_PORT 2 /* Port C */
-#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
-#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
-#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
+#define MDIO_PORT 2 /* Port C */
+#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
+#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
+#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
+#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
+ else iop->pdat &= ~0x00400000
-#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
+#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
+ else iop->pdat &= ~0x00200000
-#define MIIDELAY udelay(1)
+#define MIIDELAY udelay(1)
#endif /* CONFIG_ETHER_ON_FCC */
@@ -107,35 +107,16 @@
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#endif
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_USB | \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG ) )
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_ASKENV \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_ECHO \
+ | CFG_CMD_IMMAP \
+ | CFG_CMD_MII \
+ | CFG_CMD_PING \
+ )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -153,19 +134,19 @@
#endif
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
/*
* Miscellaneous configurable options
*/
#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
@@ -182,6 +163,7 @@
#define CFG_FLASH_BASE 0xFFE00000
#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
@@ -206,11 +188,11 @@
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/* Hard reset configuration word */
-#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 |\
+#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\
HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\
- HRCW_APPC10 |\
+ HRCW_BMS | HRCW_LBPC01 | HRCW_APPC10 |\
HRCW_MODCK_H0101 \
- ) /* 0x14820205 */
+ ) /* 0x16828605 */
/* No slaves */
#define CFG_HRCW_SLAVE1 0
#define CFG_HRCW_SLAVE2 0
@@ -228,7 +210,7 @@
#define CFG_RAMBOOT
#endif
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
@@ -238,10 +220,10 @@
#ifdef CFG_ENV_IS_IN_FLASH
# define CFG_ENV_SECT_SIZE 0x10000
-# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#else
# define CFG_ENV_ADDR (CFG_EEPROM + 0x400)
-# define CFG_ENV_SIZE 0x200
+# define CFG_ENV_SIZE 0x1000
# define CFG_NVRAM_ACCESS_ROUTINE
#endif