Add support for multiple PHYs.
diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c
index a248cad..eafa48b 100644
--- a/board/evb64260/eth.c
+++ b/board/evb64260/eth.c
@@ -85,12 +85,17 @@
static const char ether_port_phy_addr[3]={4,5,6};
#endif
+/* MII PHY access routines are common for all i/f, use gal_ent0 */
+#define GT6426x_MII_DEVNAME "gal_enet0"
+
+int gt6426x_miiphy_read(char *devname, unsigned char phy,
+ unsigned char reg, unsigned short *val);
static inline unsigned short
miiphy_read_ret(unsigned short phy, unsigned short reg)
{
unsigned short val;
- miiphy_read(phy,reg,&val);
+ gt6426x_miiphy_read(GT6426x_MII_DEVNAME,phy,reg,&val);
return val;
}
@@ -339,8 +344,8 @@
MII utilities - write: write to an MII register via SMI
***************************************************************************/
int
-miiphy_write(unsigned char phy, unsigned char reg,
- unsigned short data)
+gt6426x_miiphy_write(char *devname, unsigned char phy,
+ unsigned char reg, unsigned short data)
{
unsigned int temp= (reg<<21) | (phy<<16) | data;
@@ -354,8 +359,8 @@
MII utilities - read: read from an MII register via SMI
***************************************************************************/
int
-miiphy_read(unsigned char phy, unsigned char reg,
- unsigned short *val)
+gt6426x_miiphy_read(char *devname, unsigned char phy,
+ unsigned char reg, unsigned short *val)
{
unsigned int temp= (reg<<21) | (phy<<16) | 1<<26;
@@ -444,7 +449,7 @@
if ((psr & 0x3) != want) {
printf("MII: GT thinks %x, PHY thinks %x, restarting autoneg..\n",
psr & 0x3, want);
- miiphy_write(ether_port_phy_addr[p->dev],0,
+ miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev],0,
miiphy_read_ret(ether_port_phy_addr[p->dev],0) | (1<<9));
udelay(10000); /* the EVB's GT takes a while to notice phy
went down and up */
@@ -490,7 +495,7 @@
led 2: 0xc=link/rxact
led 3: 0x2=rxact (N/C)
strch: 0,2=30 ms, enable */
- miiphy_write(ether_port_phy_addr[p->dev], 20, 0x1c22);
+ miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev], 20, 0x1c22);
/* 2.7ns port rise time */
/*miiphy_write(ether_port_phy_addr[p->dev], 30, 0x0<<10); */
@@ -792,6 +797,11 @@
eth_register(dev);
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+ miiphy_register(dev->name,
+ gt6426x_miiphy_read, gt6426x_miiphy_write);
+#endif
}
+
}
#endif /* CFG_CMD_NET && CONFIG_NET_MULTI */