cm_t35: use scf0403 driver
Use scf0403 driver to add scf0403x LCD support for cm-t35 and cm-t3730
boards.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c
index ead821e..61707f5 100644
--- a/board/compulab/common/omap3_display.c
+++ b/board/compulab/common/omap3_display.c
@@ -14,6 +14,7 @@
#include <stdio_dev.h>
#include <asm/arch/dss.h>
#include <lcd.h>
+#include <scf0403_lcd.h>
#include <asm/arch-omap3/dss.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -22,6 +23,7 @@
NONE,
DVI,
DVI_CUSTOM,
+ DATA_IMAGE, /* #define CONFIG_SCF0403_LCD to use */
};
#define CMAP_ADDR 0x80100000
@@ -119,6 +121,18 @@
.gfx_format = GFXFORMAT_RGB16,
};
+static const struct panel_config preset_dataimage_480X800 = {
+ .lcd_size = PANEL_LCD_SIZE(480, 800),
+ .timing_h = DSS_HBP(2) | DSS_HFP(2) | DSS_HSW(2),
+ .timing_v = DSS_VBP(17) | DSS_VFP(20) | DSS_VSW(3),
+ .pol_freq = DSS_IVS | DSS_IHS | DSS_IPC | DSS_ONOFF,
+ .divisor = 10 | (1 << 10),
+ .data_lines = LCD_INTERFACE_18_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
/*
* set_resolution_params()
*
@@ -146,6 +160,13 @@
return DVI;
}
+static enum display_type set_dataimage_preset(const struct panel_config preset,
+ int x_res, int y_res)
+{
+ set_preset(preset, x_res, y_res);
+ return DATA_IMAGE;
+}
+
/*
* parse_mode() - parse the mode parameter of custom lcd settings
*
@@ -369,6 +390,8 @@
return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
else if (!strncmp(displaytype, "dvi1280x1024", 12))
return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
+ else if (!strncmp(displaytype, "dataimage480x800", 16))
+ return set_dataimage_preset(preset_dataimage_480X800, 480, 800);
return NONE;
}
@@ -401,12 +424,31 @@
clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
}
+#ifdef CONFIG_SCF0403_LCD
+static void scf0403_enable(void)
+{
+ gpio_direction_output(58, 1);
+ scf0403_init(157);
+}
+#else
+static inline void scf0403_enable(void) {}
+#endif
+
void lcd_enable(void)
{
- if (lcd_def == DVI || lcd_def == DVI_CUSTOM) {
+ switch (lcd_def) {
+ case NONE:
+ return;
+ case DVI:
+ case DVI_CUSTOM:
gpio_direction_output(54, 0); /* Turn on DVI */
- omap3_dss_enable();
+ break;
+ case DATA_IMAGE:
+ scf0403_enable();
+ break;
}
+
+ omap3_dss_enable();
}
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}