Support for LinkStation / KuroBox HD and HG PPC models
This patch is based on the port by Mihai Georgian (see linkstation.c for
Copyright information) and implements support for LinkStation / KuroBox HD
and HG PPC models from Buffalo Technology, whereby HD is deactivated at
the moment, pending network driver fixing.
Notice to users: this is pretty much a barebone port. Support for network
on HG models is already in the U-Boot mainline, but you might also want
patches to switch fan / phy modes depending on the negotiated ethernet
parameters. This patch also doesn't support console switching, booting EM
mode, Buffalo specific ext2 magic number. So, if you want to use any of
those, you need additional patches. Otherwise this patche provides a fully
functional u-boot with a network console on your system.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
diff --git a/board/linkstation/Makefile b/board/linkstation/Makefile
new file mode 100644
index 0000000..57c84de
--- /dev/null
+++ b/board/linkstation/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o ide.o hwctl.o avr.o
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c
new file mode 100644
index 0000000..68bc545
--- /dev/null
+++ b/board/linkstation/avr.c
@@ -0,0 +1,293 @@
+/*
+ * avr.c
+ *
+ * AVR functions
+ *
+ * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <ns16550.h>
+#include <console.h>
+
+/* Button codes from the AVR */
+#define PWRR 0x20 /* Power button release */
+#define PWRP 0x21 /* Power button push */
+#define RESR 0x22 /* Reset button release */
+#define RESP 0x23 /* Reset button push */
+#define AVRINIT 0x33 /* Init complete */
+#define AVRRESET 0x31 /* Reset request */
+
+/* LED commands */
+#define PWRBLINKSTRT '[' /* Blink power LED */
+#define PWRBLINKSTOP 'Z' /* Solid power LED */
+#define HDDLEDON 'W' /* HDD LED on */
+#define HDDLEDOFF 'V' /* HDD LED off */
+#define HDDBLINKSTRT 'Y' /* HDD LED start blink */
+#define HDDBLINKSTOP 'X' /* HDD LED stop blink */
+
+/* Timings for LEDs blinking to show choice */
+#define PULSETIME 250 /* msecs */
+#define LONGPAUSE (5 * PULSETIME)
+
+/* Button press times */
+#define PUSHHOLD 1000 /* msecs */
+#define NOBUTTON (6 * (LONGPAUSE+PULSETIME))
+
+/* Boot and console choices */
+#define MAX_BOOT_CHOICE 3
+
+static char *consoles[] = {
+ "serial",
+#if defined(CONFIG_NETCONSOLE)
+ "nc",
+#endif
+};
+#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *))
+
+#if !defined(CONFIG_NETCONSOLE)
+#define DEF_CONS_CHOICE 0
+#else
+#define DEF_CONS_CHOICE 1
+#endif
+
+#define perror(fmt, args...) printf("%s: " fmt, __FUNCTION__ , ##args)
+
+extern void miconCntl_SendCmd(unsigned char dat);
+extern void miconCntl_DisWDT(void);
+
+static int boot_stop;
+
+static int boot_choice = 1;
+static int cons_choice = DEF_CONS_CHOICE;
+
+static char envbuffer[16];
+
+void init_AVR_DUART (void)
+{
+ NS16550_t AVR_port = (NS16550_t) CFG_NS16550_COM2;
+ int clock_divisor = CFG_NS16550_CLK / 16 / 9600;
+
+ /*
+ * AVR port init sequence taken from
+ * the original Linkstation init code
+ * Normal U-Boot serial reinit doesn't
+ * work because the AVR uses even parity
+ */
+ AVR_port->lcr = 0x00;
+ AVR_port->ier = 0x00;
+ AVR_port->lcr = LCR_BKSE;
+ AVR_port->dll = clock_divisor & 0xff;
+ AVR_port->dlm = (clock_divisor >> 8) & 0xff;
+ AVR_port->lcr = LCR_WLS_8 | LCR_PEN | LCR_EPS;
+ AVR_port->mcr = 0x00;
+ AVR_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;
+
+ miconCntl_DisWDT();
+
+ boot_stop = 0;
+ miconCntl_SendCmd(PWRBLINKSTRT);
+}
+
+static inline int avr_tstc(void)
+{
+ return (NS16550_tstc((NS16550_t)CFG_NS16550_COM2));
+}
+
+static inline char avr_getc(void)
+{
+ return (NS16550_getc((NS16550_t)CFG_NS16550_COM2));
+}
+
+static int push_timeout(char button_code)
+{
+ ulong push_start = get_timer(0);
+ while (get_timer(push_start) <= PUSHHOLD)
+ if (avr_tstc() && avr_getc() == button_code)
+ return 0;
+ return 1;
+}
+
+static void next_boot_choice(void)
+{
+ ulong return_start;
+ ulong pulse_start;
+ int on_times;
+ int button_on;
+ int led_state;
+ char c;
+
+ button_on = 0;
+ return_start = get_timer(0);
+
+ on_times = boot_choice;
+ led_state = 0;
+ miconCntl_SendCmd(HDDLEDOFF);
+ pulse_start = get_timer(0);
+
+ while (get_timer(return_start) <= NOBUTTON || button_on) {
+ if (avr_tstc()) {
+ c = avr_getc();
+ if (c == PWRP)
+ button_on = 1;
+ else if (c == PWRR) {
+ button_on = 0;
+ return_start = get_timer(0);
+ if (++boot_choice > MAX_BOOT_CHOICE)
+ boot_choice = 1;
+ sprintf(envbuffer, "bootcmd%d", boot_choice);
+ if (getenv(envbuffer)) {
+ sprintf(envbuffer, "run bootcmd%d", boot_choice);
+ setenv("bootcmd", envbuffer);
+ }
+ on_times = boot_choice;
+ led_state = 1;
+ miconCntl_SendCmd(HDDLEDON);
+ pulse_start = get_timer(0);
+ } else {
+ perror("Unexpected code: 0x%02X\n", c);
+ }
+ }
+ if (on_times && get_timer(pulse_start) > PULSETIME) {
+ if (led_state == 1) {
+ --on_times;
+ led_state = 0;
+ miconCntl_SendCmd(HDDLEDOFF);
+ } else {
+ led_state = 1;
+ miconCntl_SendCmd(HDDLEDON);
+ }
+ pulse_start = get_timer(0);
+ }
+ if (!on_times && get_timer(pulse_start) > LONGPAUSE) {
+ on_times = boot_choice;
+ led_state = 1;
+ miconCntl_SendCmd(HDDLEDON);
+ pulse_start = get_timer(0);
+ }
+ }
+ if (led_state)
+ miconCntl_SendCmd(HDDLEDOFF);
+}
+
+void next_cons_choice(int console)
+{
+ ulong return_start;
+ ulong pulse_start;
+ int on_times;
+ int button_on;
+ int led_state;
+ char c;
+
+ button_on = 0;
+ cons_choice = console;
+ return_start = get_timer(0);
+
+ on_times = cons_choice+1;
+ led_state = 1;
+ miconCntl_SendCmd(HDDLEDON);
+ pulse_start = get_timer(0);
+
+ while (get_timer(return_start) <= NOBUTTON || button_on) {
+ if (avr_tstc()) {
+ c = avr_getc();
+ if (c == RESP)
+ button_on = 1;
+ else if (c == RESR) {
+ button_on = 0;
+ return_start = get_timer(0);
+ cons_choice = (cons_choice + 1) % MAX_CONS_CHOICE;
+ console_assign(stdin, consoles[cons_choice]);
+ console_assign(stdout, consoles[cons_choice]);
+ console_assign(stderr, consoles[cons_choice]);
+ on_times = cons_choice+1;
+ led_state = 0;
+ miconCntl_SendCmd(HDDLEDOFF);
+ pulse_start = get_timer(0);
+ } else {
+ perror("Unexpected code: 0x%02X\n", c);
+ }
+ }
+ if (on_times && get_timer(pulse_start) > PULSETIME) {
+ if (led_state == 0) {
+ --on_times;
+ led_state = 1;
+ miconCntl_SendCmd(HDDLEDON);
+ } else {
+ led_state = 0;
+ miconCntl_SendCmd(HDDLEDOFF);
+ }
+ pulse_start = get_timer(0);
+ }
+ if (!on_times && get_timer(pulse_start) > LONGPAUSE) {
+ on_times = cons_choice+1;
+ led_state = 0;
+ miconCntl_SendCmd(HDDLEDOFF);
+ pulse_start = get_timer(0);
+ }
+ }
+ if (led_state);
+ miconCntl_SendCmd(HDDLEDOFF);
+}
+
+int avr_input(void)
+{
+ char avr_button;
+
+ if (!avr_tstc())
+ return 0;
+
+ avr_button = avr_getc();
+ switch (avr_button) {
+ case PWRP:
+ if (push_timeout(PWRR)) {
+ /* Timeout before power button release */
+ boot_stop = ~boot_stop;
+ if (boot_stop)
+ miconCntl_SendCmd(PWRBLINKSTOP);
+ else
+ miconCntl_SendCmd(PWRBLINKSTRT);
+ /* Wait for power button release */
+ while (avr_getc() != PWRR)
+ ;
+ } else
+ /* Power button released */
+ next_boot_choice();
+ break;
+ case RESP:
+ /* Wait for Reset button release */
+ while (avr_getc() != RESR)
+ ;
+ next_cons_choice(cons_choice);
+ break;
+ case AVRINIT:
+ return 0;
+ default:
+ perror("Unexpected code: 0x%02X\n", avr_button);
+ return 0;
+ }
+ if (boot_stop)
+ return (-3);
+ else
+ return (-2);
+}
+
+void avr_StopBoot(void)
+{
+ boot_stop = ~0;
+ miconCntl_SendCmd(PWRBLINKSTOP);
+}
diff --git a/board/linkstation/config.mk b/board/linkstation/config.mk
new file mode 100644
index 0000000..bdf611d
--- /dev/null
+++ b/board/linkstation/config.mk
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# LinkStation/LinkStation-HG:
+#
+# Valid values for TEXT_BASE are:
+#
+# Standard configuration - all models
+# 0xFFF00000 boot from flash
+#
+# Test configuration (boot from RAM using uloader.o)
+# LinkStation HD-HLAN and KuroBox Standard
+# 0x03F00000 boot from RAM
+# LinkStation HD-HGLAN and KuroBox HG
+# 0x07F00000 boot from RAM
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+# For flash image - all models
+TEXT_BASE = 0xFFF00000
+# For RAM image
+# HLAN and LAN
+#TEXT_BASE = 0x03F00000
+# HGLAN and HGTL
+#TEXT_BASE = 0x07F00000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/linkstation/hwctl.c b/board/linkstation/hwctl.c
new file mode 100644
index 0000000..9db128a
--- /dev/null
+++ b/board/linkstation/hwctl.c
@@ -0,0 +1,135 @@
+/*
+ * hwctl.c
+ *
+ * LinkStation HW Control Driver
+ *
+ * Copyright (C) 2001-2004 BUFFALO INC.
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL), incorporated herein by reference.
+ * Drivers based on or derived from this code fall under the GPL and must
+ * retain the authorship, copyright and license notice. This file is not
+ * a complete program and may only be used when the entire operating
+ * system is licensed under the GPL.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#define mdelay(n) udelay((n)*1000)
+
+#define AVR_PORT CFG_NS16550_COM2
+
+/* 2005.5.10 BUFFALO add */
+/*--------------------------------------------------------------*/
+static inline void miconCntl_SendUart(unsigned char dat)
+{
+ out_8((char *)AVR_PORT, dat);
+ mdelay(1);
+}
+
+/*--------------------------------------------------------------*/
+void miconCntl_SendCmd(unsigned char dat)
+{
+ int i;
+
+ for (i=0; i<4; i++){
+ miconCntl_SendUart(dat);
+ }
+}
+
+/*--------------------------------------------------------------*/
+void miconCntl_FanLow(void)
+{
+#ifdef CONFIG_HTGL
+ miconCntl_SendCmd(0x5C);
+#endif
+}
+
+/*--------------------------------------------------------------*/
+void miconCntl_FanHigh(void)
+{
+#ifdef CONFIG_HTGL
+ miconCntl_SendCmd(0x5D);
+#endif
+}
+
+/*--------------------------------------------------------------*/
+/* 1000Mbps */
+void miconCntl_Eth1000M(int up)
+{
+#ifdef CONFIG_HTGL
+ if (up)
+ miconCntl_SendCmd(0x93);
+ else
+ miconCntl_SendCmd(0x92);
+#else
+ if (up)
+ miconCntl_SendCmd(0x5D);
+ else
+ miconCntl_SendCmd(0x5C);
+#endif
+}
+
+/*--------------------------------------------------------------*/
+/* 100Mbps */
+void miconCntl_Eth100M(int up)
+{
+#ifdef CONFIG_HTGL
+ if (up)
+ miconCntl_SendCmd(0x91);
+ else
+ miconCntl_SendCmd(0x90);
+#else
+ if (up)
+ miconCntl_SendCmd(0x5C);
+#endif
+}
+
+/*--------------------------------------------------------------*/
+/* 10Mbps */
+void miconCntl_Eth10M(int up)
+{
+#ifdef CONFIG_HTGL
+ if (up)
+ miconCntl_SendCmd(0x8F);
+ else
+ miconCntl_SendCmd(0x8E);
+#else
+ if (up)
+ miconCntl_SendCmd(0x5C);
+#endif
+}
+
+/*--------------------------------------------------------------*/
+/* */
+void miconCntl_5f(void)
+{
+ miconCntl_SendCmd(0x5F);
+ mdelay(100);
+}
+
+/*--------------------------------------------------------------*/
+/* "reboot start" signal */
+void miconCntl_Reboot(void)
+{
+ miconCntl_SendCmd(0x43);
+}
+
+/*--------------------------------------------------------------*/
+/* Disable watchdog timer */
+void miconCntl_DisWDT(void)
+{
+ miconCntl_SendCmd(0x41); /* A */
+ miconCntl_SendCmd(0x46); /* F */
+ miconCntl_SendCmd(0x4A); /* J */
+ miconCntl_SendCmd(0x3E); /* > */
+ miconCntl_SendCmd(0x56); /* V */
+ miconCntl_SendCmd(0x3E); /* > */
+ miconCntl_SendCmd(0x5A); /* Z */
+ miconCntl_SendCmd(0x56); /* V */
+ miconCntl_SendCmd(0x4B); /* K */
+}
diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c
new file mode 100644
index 0000000..37d9b57
--- /dev/null
+++ b/board/linkstation/ide.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* ide.c - ide support functions */
+
+
+#include <common.h>
+
+#ifdef CONFIG_CMD_IDE
+#include <ata.h>
+#include <ide.h>
+#include <pci.h>
+
+#define IT8212_PCI_CpuCONTROL 0x5e
+#define IT8212_PCI_PciModeCONTROL 0x50
+#define IT8212_PCI_IdeIoCONFIG 0x40
+#define IT8212_PCI_IdeBusSkewCONTROL 0x4c
+#define IT8212_PCI_IdeDrivingCURRENT 0x42
+
+extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern struct pci_controller hose;
+
+int ide_preinit (void)
+{
+ int status;
+ pci_dev_t devbusfn;
+ int l;
+
+ status = 1;
+ for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+ ide_bus_offset[l] = -ATA_STATUS;
+ }
+ devbusfn = pci_find_device(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, 0);
+ if (devbusfn == -1)
+ devbusfn = pci_find_device(PCI_VENDOR_ID_ITE,PCI_DEVICE_ID_ITE_8212,0);
+ if (devbusfn != -1) {
+ status = 0;
+
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
+ (u32 *) &ide_bus_offset[0]);
+ ide_bus_offset[0] &= 0xfffffffe;
+ ide_bus_offset[0] = pci_hose_bus_to_phys(&hose,
+ ide_bus_offset[0] & 0xfffffffe,
+ PCI_REGION_IO);
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2,
+ (u32 *) &ide_bus_offset[1]);
+ ide_bus_offset[1] &= 0xfffffffe;
+ ide_bus_offset[1] = pci_hose_bus_to_phys(&hose,
+ ide_bus_offset[1] & 0xfffffffe,
+ PCI_REGION_IO);
+ }
+
+ if (pci_find_device (PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212, 0) != -1) {
+ pci_write_config_byte(devbusfn, IT8212_PCI_CpuCONTROL, 0x01);
+ pci_write_config_byte(devbusfn, IT8212_PCI_PciModeCONTROL, 0x00);
+ pci_write_config_word(devbusfn, PCI_COMMAND, 0x0047);
+#ifdef CONFIG_IT8212_SECONDARY_ENABLE
+ pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0xA0F3);
+#else
+ pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0x8031);
+#endif
+ pci_write_config_dword(devbusfn, IT8212_PCI_IdeBusSkewCONTROL, 0x02040204);
+/* __LS_COMMENT__ BUFFALO changed 2004.11.10 changed for EMI */
+ pci_write_config_byte(devbusfn, IT8212_PCI_IdeDrivingCURRENT, 0x36); /* 10mA */
+/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x09); */ /* 4mA */
+/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x12); */ /* 6mA */
+/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x24); */ /* 6mA,2mA */
+/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x2D); */ /* 8mA,4mA */
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x00);
+ }
+
+ return (status);
+}
+
+void ide_set_reset (int flag) {
+ return;
+}
+
+#endif /* CONFIG_CMD_IDE */
diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c
new file mode 100644
index 0000000..f6bc0a9
--- /dev/null
+++ b/board/linkstation/linkstation.c
@@ -0,0 +1,130 @@
+/*
+ * linkstation.c
+ *
+ * Misc LinkStation specific functions
+ *
+ * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <version.h>
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/io.h>
+#include <ns16550.h>
+
+#ifdef CONFIG_PCI
+#include <pci.h>
+#endif
+
+extern void init_AVR_DUART(void);
+
+int checkboard (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ char *p;
+ bd_t *bd = gd->bd;
+
+ init_AVR_DUART();
+
+ if ((p = getenv ("console_nr")) != NULL) {
+ unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
+
+ bd->bi_baudrate &= ~3;
+ bd->bi_baudrate |= con_nr & 3;
+ }
+ return 0;
+}
+
+long int initdram (int board_type)
+{
+ return (get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE));
+}
+
+/*
+ * Initialize PCI Devices
+ */
+#ifdef CONFIG_PCI
+
+#ifndef CONFIG_PCI_PNP
+
+static struct pci_config_table pci_linkstation_config_table[] = {
+ /* vendor, device, class */
+ /* bus, dev, func */
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0x0b, 0, /* AN983B or RTL8110S */
+ /* ethernet controller */
+ pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
+ PCI_ETH_MEMADDR,
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0x0c, 0, /* SII680 or IT8211AF */
+ /* ide controller */
+ pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
+ PCI_IDE_MEMADDR,
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */
+ pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
+ PCI_USB0_MEMADDR,
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */
+ pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
+ PCI_USB1_MEMADDR,
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */
+ pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
+ PCI_USB2_MEMADDR,
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
+ { }
+};
+#endif
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_linkstation_config_table,
+#endif
+};
+
+void pci_init_board (void)
+{
+ pci_mpc824x_init (&hose);
+
+ /* Reset USB 1.1 */
+ /* Haven't seen any change without these on a HG, maybe it is
+ * needed on other models */
+ out_le32((volatile unsigned*)(PCI_USB0_MEMADDR + 8), 1);
+ out_le32((volatile unsigned*)(PCI_USB1_MEMADDR + 8), 1);
+}
+#endif /* CONFIG_PCI */
+
+#define UART_DCR 0x80004511
+int board_early_init_f (void)
+{
+ /* set DUART mode */
+ out_8((volatile u8*)UART_DCR, 1);
+ return 0;
+}