diff --git a/arch/arm/include/asm/arch-stm32f4/gpio.h b/arch/arm/include/asm/arch-stm32f4/gpio.h
index 7cd866e..dd33b96 100644
--- a/arch/arm/include/asm/arch-stm32f4/gpio.h
+++ b/arch/arm/include/asm/arch-stm32f4/gpio.h
@@ -11,6 +11,38 @@
 #ifndef _STM32_GPIO_H_
 #define _STM32_GPIO_H_
 
+#if (CONFIG_STM32_USART == 1)
+#define STM32_GPIO_PORT_X   STM32_GPIO_PORT_A
+#define STM32_GPIO_PIN_TX   STM32_GPIO_PIN_9
+#define STM32_GPIO_PIN_RX   STM32_GPIO_PIN_10
+#define STM32_GPIO_USART    STM32_GPIO_AF7
+
+#elif (CONFIG_STM32_USART == 2)
+#define STM32_GPIO_PORT_X   STM32_GPIO_PORT_D
+#define STM32_GPIO_PIN_TX   STM32_GPIO_PIN_5
+#define STM32_GPIO_PIN_RX   STM32_GPIO_PIN_6
+#define STM32_GPIO_USART    STM32_GPIO_AF7
+
+#elif (CONFIG_STM32_USART == 3)
+#define STM32_GPIO_PORT_X   STM32_GPIO_PORT_C
+#define STM32_GPIO_PIN_TX   STM32_GPIO_PIN_10
+#define STM32_GPIO_PIN_RX   STM32_GPIO_PIN_11
+#define STM32_GPIO_USART    STM32_GPIO_AF7
+
+#elif (CONFIG_STM32_USART == 6)
+#define STM32_GPIO_PORT_X   STM32_GPIO_PORT_G
+#define STM32_GPIO_PIN_TX   STM32_GPIO_PIN_14
+#define STM32_GPIO_PIN_RX   STM32_GPIO_PIN_9
+#define STM32_GPIO_USART    STM32_GPIO_AF8
+
+#else
+#define STM32_GPIO_PORT_X   STM32_GPIO_PORT_A
+#define STM32_GPIO_PIN_TX   STM32_GPIO_PIN_9
+#define STM32_GPIO_PIN_RX   STM32_GPIO_PIN_10
+#define STM32_GPIO_USART    STM32_GPIO_AF7
+
+#endif
+
 enum stm32_gpio_port {
 	STM32_GPIO_PORT_A = 0,
 	STM32_GPIO_PORT_B,
diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index 2c4830f..2dd5d93 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -33,21 +33,21 @@
 	.otype = STM32_GPIO_OTYPE_PP,
 	.speed = STM32_GPIO_SPEED_50M,
 	.pupd = STM32_GPIO_PUPD_UP,
-	.af = STM32_GPIO_AF7
+	.af = STM32_GPIO_USART
 };
 
-static const struct stm32_gpio_dsc usart1_gpio[] = {
-	{STM32_GPIO_PORT_A, STM32_GPIO_PIN_9},	/* TX */
-	{STM32_GPIO_PORT_A, STM32_GPIO_PIN_10},	/* RX */
+static const struct stm32_gpio_dsc usart_gpio[] = {
+	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_TX},	/* TX */
+	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_RX},	/* RX */
 };
 
-int uart1_setup_gpio(void)
+int uart_setup_gpio(void)
 {
 	int i;
 	int rv = 0;
 
-	for (i = 0; i < ARRAY_SIZE(usart1_gpio); i++) {
-		rv = stm32_gpio_config(&usart1_gpio[i], &gpio_ctl_usart);
+	for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
+		rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
 		if (rv)
 			goto out;
 	}
@@ -272,7 +272,7 @@
 {
 	int res;
 
-	res = uart1_setup_gpio();
+	res = uart_setup_gpio();
 	if (res)
 		return res;
 
diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index 8c613db..8b2830b 100644
--- a/drivers/serial/serial_stm32.c
+++ b/drivers/serial/serial_stm32.c
@@ -10,11 +10,34 @@
 #include <serial.h>
 #include <asm/arch/stm32.h>
 
+/*
+ * Set up the usart port
+ */
+#if (CONFIG_STM32_USART >= 1) && (CONFIG_STM32_USART <= 6)
+#define USART_PORT	(CONFIG_STM32_USART - 1)
+#else
+#define USART_PORT	0
+#endif
+/*
+ * Set up the usart base address
+ *
+ * --STM32_USARTD_BASE means default setting
+ */
 #define STM32_USART1_BASE	(STM32_APB2PERIPH_BASE + 0x1000)
-#define RCC_APB2ENR_USART1EN	(1 << 4)
-
-#define USART_BASE		STM32_USART1_BASE
-#define RCC_USART_ENABLE	RCC_APB2ENR_USART1EN
+#define STM32_USART2_BASE	(STM32_APB1PERIPH_BASE + 0x4400)
+#define STM32_USART3_BASE	(STM32_APB1PERIPH_BASE + 0x4800)
+#define STM32_USART6_BASE	(STM32_APB2PERIPH_BASE + 0x1400)
+#define STM32_USARTD_BASE	STM32_USART1_BASE
+/*
+ * RCC USART specific definitions
+ *
+ * --RCC_ENR_USARTDEN means default setting
+ */
+#define RCC_ENR_USART1EN	(1 << 4)
+#define RCC_ENR_USART2EN	(1 << 17)
+#define RCC_ENR_USART3EN	(1 << 18)
+#define RCC_ENR_USART6EN	(1 <<  5)
+#define RCC_ENR_USARTDEN	RCC_ENR_USART1EN
 
 struct stm32_serial {
 	u32 sr;
@@ -39,6 +62,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const unsigned long usart_base[] = {
+	STM32_USART1_BASE,
+	STM32_USART2_BASE,
+	STM32_USART3_BASE,
+	STM32_USARTD_BASE,
+	STM32_USARTD_BASE,
+	STM32_USART6_BASE
+};
+
+static const unsigned long rcc_enr_en[] = {
+	RCC_ENR_USART1EN,
+	RCC_ENR_USART2EN,
+	RCC_ENR_USART3EN,
+	RCC_ENR_USARTDEN,
+	RCC_ENR_USARTDEN,
+	RCC_ENR_USART6EN
+};
+
 static void stm32_serial_setbrg(void)
 {
 	serial_init();
@@ -46,14 +87,17 @@
 
 static int stm32_serial_init(void)
 {
-	struct stm32_serial *usart = (struct stm32_serial *)USART_BASE;
+	struct stm32_serial *usart =
+		(struct stm32_serial *)usart_base[USART_PORT];
 	u32 clock, int_div, frac_div, tmp;
 
-	if ((USART_BASE & STM32_BUS_MASK) == STM32_APB1PERIPH_BASE) {
-		setbits_le32(&STM32_RCC->apb1enr, RCC_USART_ENABLE);
+	if ((usart_base[USART_PORT] & STM32_BUS_MASK) ==
+			STM32_APB1PERIPH_BASE) {
+		setbits_le32(&STM32_RCC->apb1enr, rcc_enr_en[USART_PORT]);
 		clock = clock_get(CLOCK_APB1);
-	} else if ((USART_BASE & STM32_BUS_MASK) == STM32_APB2PERIPH_BASE) {
-		setbits_le32(&STM32_RCC->apb2enr, RCC_USART_ENABLE);
+	} else if ((usart_base[USART_PORT] & STM32_BUS_MASK) ==
+			STM32_APB2PERIPH_BASE) {
+		setbits_le32(&STM32_RCC->apb2enr, rcc_enr_en[USART_PORT]);
 		clock = clock_get(CLOCK_APB2);
 	} else {
 		return -1;
@@ -72,7 +116,8 @@
 
 static int stm32_serial_getc(void)
 {
-	struct stm32_serial *usart = (struct stm32_serial *)USART_BASE;
+	struct stm32_serial *usart =
+		(struct stm32_serial *)usart_base[USART_PORT];
 	while ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0)
 		;
 	return readl(&usart->dr);
@@ -80,7 +125,8 @@
 
 static void stm32_serial_putc(const char c)
 {
-	struct stm32_serial *usart = (struct stm32_serial *)USART_BASE;
+	struct stm32_serial *usart =
+		(struct stm32_serial *)usart_base[USART_PORT];
 
 	if (c == '\n')
 		stm32_serial_putc('\r');
@@ -92,7 +138,8 @@
 
 static int stm32_serial_tstc(void)
 {
-	struct stm32_serial *usart = (struct stm32_serial *)USART_BASE;
+	struct stm32_serial *usart =
+		(struct stm32_serial *)usart_base[USART_PORT];
 	u8 ret;
 
 	ret = readl(&usart->sr) & USART_SR_FLAG_RXNE;
diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
index 7f569fd..84cc19d 100644
--- a/include/configs/stm32f429-discovery.h
+++ b/include/configs/stm32f429-discovery.h
@@ -50,8 +50,14 @@
 
 #define CONFIG_STM32_GPIO
 #define CONFIG_STM32_SERIAL
-
-#define CONFIG_STM32_USART1
+/*
+ * Configuration of the USART
+ * 1:   TX:PA9  PX:PA10
+ * 2:   TX:PD5  RX:PD6
+ * 3:   TX:PC10 RX:PC11
+ * 6:   TX:PC6  RX:PC7
+ */
+#define CONFIG_STM32_USART		1
 
 #define CONFIG_STM32_HSE_HZ		8000000