diff --git a/arch/arm/mach-davinci/dp83848.c b/arch/arm/mach-davinci/dp83848.c
new file mode 100644
index 0000000..6387e95
--- /dev/null
+++ b/arch/arm/mach-davinci/dp83848.c
@@ -0,0 +1,128 @@
+/*
+ * National Semiconductor DP83848 PHY Driver for TI DaVinci
+ * (TMS320DM644x) based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <net.h>
+#include <dp83848.h>
+#include <asm/arch/emac_defs.h>
+#include "../../../drivers/net/davinci_emac.h"
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+
+#ifdef CONFIG_CMD_NET
+
+int dp83848_is_phy_connected(int phy_addr)
+{
+	u_int16_t	id1, id2;
+
+	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
+		return(0);
+	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
+		return(0);
+
+	if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
+		return(1);
+
+	return(0);
+}
+
+int dp83848_get_link_speed(int phy_addr)
+{
+	u_int16_t		tmp;
+	volatile emac_regs*	emac = (emac_regs *)EMAC_BASE_ADDR;
+
+	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+		return(0);
+
+	if (!(tmp & DP83848_LINK_STATUS))	/* link up? */
+		return(0);
+
+	if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
+		return(0);
+
+	/* Speed doesn't matter, there is no setting for it in EMAC... */
+	if (tmp & DP83848_DUPLEX) {
+		/* set DM644x EMAC for Full Duplex  */
+		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
+			EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+	} else {
+		/*set DM644x EMAC for Half Duplex  */
+		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+	}
+
+	return(1);
+}
+
+
+int dp83848_init_phy(int phy_addr)
+{
+	int	ret = 1;
+
+	if (!dp83848_get_link_speed(phy_addr)) {
+		/* Try another time */
+		udelay(100000);
+		ret = dp83848_get_link_speed(phy_addr);
+	}
+
+	/* Disable PHY Interrupts */
+	davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
+
+	return(ret);
+}
+
+
+int dp83848_auto_negotiate(int phy_addr)
+{
+	u_int16_t	tmp;
+
+
+	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+		return(0);
+
+	/* Restart Auto_negotiation  */
+	tmp &= ~DP83848_AUTONEG;	/* remove autonegotiation enable */
+	tmp |= DP83848_ISOLATE;		/* Electrically isolate PHY */
+	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+
+	/* Set the Auto_negotiation Advertisement Register
+	 * MII advertising for Next page, 100BaseTxFD and HD,
+	 * 10BaseTFD and HD, IEEE 802.3
+	 */
+	tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
+		DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
+	davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
+
+
+	/* Read Control Register */
+	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+		return(0);
+
+	tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
+	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+
+	/* Restart Auto_negotiation  */
+	tmp |= DP83848_RESTART_AUTONEG;
+	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+
+	/*check AutoNegotiate complete */
+	udelay(10000);
+	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+		return(0);
+
+	if (!(tmp & DP83848_AUTONEG_COMP))
+		return(0);
+
+	return (dp83848_get_link_speed(phy_addr));
+}
+
+#endif	/* CONFIG_CMD_NET */
+
+#endif	/* CONFIG_DRIVER_ETHER */