ddr: altera: Reorder scc manager functions
This patch just puts functions which look similar next to each
other, so they can be sorted out. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 2fcc3ee..e839646 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -270,8 +270,15 @@
}
}
-static void scc_mgr_set_dqs_bus_in_delay(uint32_t read_group,
- uint32_t delay)
+static void scc_mgr_set_dqdqs_output_phase(uint32_t write_group, uint32_t phase)
+{
+ u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_DQDQS_OUT_PHASE_OFFSET;
+
+ /* Load the setting in the SCC manager */
+ writel(phase, addr + (write_group << 2));
+}
+
+static void scc_mgr_set_dqs_bus_in_delay(uint32_t read_group, uint32_t delay)
{
u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_DQS_IN_DELAY_OFFSET;
@@ -279,14 +286,6 @@
writel(delay, addr + (read_group << 2));
}
-static void scc_mgr_set_dqs_io_in_delay(uint32_t write_group,
- uint32_t delay)
-{
- u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_IN_DELAY_OFFSET;
-
- writel(delay, addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
-}
-
static void scc_mgr_set_dqs_en_phase(uint32_t read_group, uint32_t phase)
{
u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_DQS_EN_PHASE_OFFSET;
@@ -295,6 +294,78 @@
writel(phase, addr + (read_group << 2));
}
+static void scc_mgr_set_dqs_en_delay(uint32_t read_group, uint32_t delay)
+{
+ uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_DQS_EN_DELAY_OFFSET;
+
+ /* Load the setting in the SCC manager */
+ writel(delay + IO_DQS_EN_DELAY_OFFSET, addr + (read_group << 2));
+}
+
+static void scc_mgr_set_dqs_io_in_delay(uint32_t write_group, uint32_t delay)
+{
+ u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_IN_DELAY_OFFSET;
+
+ writel(delay, addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
+}
+
+static void scc_mgr_set_dq_in_delay(uint32_t dq_in_group, uint32_t delay)
+{
+ uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_IN_DELAY_OFFSET;
+
+ /* Load the setting in the SCC manager */
+ writel(delay, addr + (dq_in_group << 2));
+}
+
+static void scc_mgr_set_dq_out1_delay(uint32_t dq_in_group, uint32_t delay)
+{
+ uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_OUT1_DELAY_OFFSET;
+
+ /* Load the setting in the SCC manager */
+ writel(delay, addr + (dq_in_group << 2));
+}
+
+static void scc_mgr_set_dqs_out1_delay(uint32_t write_group,
+ uint32_t delay)
+{
+ uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_OUT1_DELAY_OFFSET;
+
+ /* Load the setting in the SCC manager */
+ writel(delay, addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
+}
+
+static void scc_mgr_set_dm_out1_delay(uint32_t dm, uint32_t delay)
+{
+ uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_OUT1_DELAY_OFFSET;
+
+ /* Load the setting in the SCC manager */
+ writel(delay, addr + ((RW_MGR_MEM_DQ_PER_WRITE_DQS + 1 + dm) << 2));
+}
+
+/* load up dqs config settings */
+static void scc_mgr_load_dqs(uint32_t dqs)
+{
+ writel(dqs, &sdr_scc_mgr->dqs_ena);
+}
+
+/* load up dqs io config settings */
+static void scc_mgr_load_dqs_io(void)
+{
+ writel(0, &sdr_scc_mgr->dqs_io_ena);
+}
+
+/* load up dq config settings */
+static void scc_mgr_load_dq(uint32_t dq_in_group)
+{
+ writel(dq_in_group, &sdr_scc_mgr->dq_ena);
+}
+
+/* load up dm config settings */
+static void scc_mgr_load_dm(uint32_t dm)
+{
+ writel(dm, &sdr_scc_mgr->dm_ena);
+}
+
static void scc_mgr_set_dqs_en_phase_all_ranks(uint32_t read_group,
uint32_t phase)
{
@@ -322,15 +393,6 @@
}
}
-static void scc_mgr_set_dqdqs_output_phase(uint32_t write_group,
- uint32_t phase)
-{
- u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_DQDQS_OUT_PHASE_OFFSET;
-
- /* Load the setting in the SCC manager */
- writel(phase, addr + (write_group << 2));
-}
-
static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group,
uint32_t phase)
{
@@ -358,15 +420,6 @@
}
}
-static void scc_mgr_set_dqs_en_delay(uint32_t read_group, uint32_t delay)
-{
- uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_DQS_EN_DELAY_OFFSET;
-
- /* Load the setting in the SCC manager */
- writel(delay + IO_DQS_EN_DELAY_OFFSET, addr +
- (read_group << 2));
-}
-
static void scc_mgr_set_dqs_en_delay_all_ranks(uint32_t read_group,
uint32_t delay)
{
@@ -417,22 +470,6 @@
writel(delay, addr + (read_group << 2));
}
-static void scc_mgr_set_dq_out1_delay(uint32_t dq_in_group, uint32_t delay)
-{
- uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_OUT1_DELAY_OFFSET;
-
- /* Load the setting in the SCC manager */
- writel(delay, addr + (dq_in_group << 2));
-}
-
-static void scc_mgr_set_dq_in_delay(uint32_t dq_in_group, uint32_t delay)
-{
- uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_IN_DELAY_OFFSET;
-
- /* Load the setting in the SCC manager */
- writel(delay, addr + (dq_in_group << 2));
-}
-
static void scc_mgr_set_hhp_extras(void)
{
/*
@@ -450,24 +487,6 @@
writel(value, addr + SCC_MGR_HHP_EXTRAS_OFFSET);
}
-static void scc_mgr_set_dqs_out1_delay(uint32_t write_group,
- uint32_t delay)
-{
- uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_OUT1_DELAY_OFFSET;
-
- /* Load the setting in the SCC manager */
- writel(delay, addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
-}
-
-static void scc_mgr_set_dm_out1_delay(uint32_t dm, uint32_t delay)
-{
- uint32_t addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_OUT1_DELAY_OFFSET;
-
- /* Load the setting in the SCC manager */
- writel(delay, addr +
- ((RW_MGR_MEM_DQ_PER_WRITE_DQS + 1 + dm) << 2));
-}
-
/*
* USER Zero all DQS config
* TODO: maybe rename to scc_mgr_zero_dqs_config (or something)
@@ -532,6 +551,23 @@
writel(0, &sdr_scc_mgr->update);
}
+static void scc_mgr_load_dqs_for_write_group(uint32_t write_group)
+{
+ uint32_t read_group;
+ uint32_t addr = (u32)&sdr_scc_mgr->dqs_ena;
+ /*
+ * Although OCT affects only write data, the OCT delay is controlled
+ * by the DQS logic block which is instantiated once per read group.
+ * For protocols where a write group consists of multiple read groups,
+ * the setting must be scanned multiple times.
+ */
+ for (read_group = write_group * RW_MGR_MEM_IF_READ_DQS_WIDTH /
+ RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
+ read_group < (write_group + 1) * RW_MGR_MEM_IF_READ_DQS_WIDTH /
+ RW_MGR_MEM_IF_WRITE_DQS_WIDTH; ++read_group)
+ writel(read_group, addr);
+}
+
static void scc_mgr_zero_group(uint32_t write_group, uint32_t test_begin,
int32_t out_only)
{
@@ -573,47 +609,6 @@
}
}
-/* load up dqs config settings */
-static void scc_mgr_load_dqs(uint32_t dqs)
-{
- writel(dqs, &sdr_scc_mgr->dqs_ena);
-}
-
-static void scc_mgr_load_dqs_for_write_group(uint32_t write_group)
-{
- uint32_t read_group;
- uint32_t addr = (u32)&sdr_scc_mgr->dqs_ena;
- /*
- * Although OCT affects only write data, the OCT delay is controlled
- * by the DQS logic block which is instantiated once per read group.
- * For protocols where a write group consists of multiple read groups,
- * the setting must be scanned multiple times.
- */
- for (read_group = write_group * RW_MGR_MEM_IF_READ_DQS_WIDTH /
- RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
- read_group < (write_group + 1) * RW_MGR_MEM_IF_READ_DQS_WIDTH /
- RW_MGR_MEM_IF_WRITE_DQS_WIDTH; ++read_group)
- writel(read_group, addr);
-}
-
-/* load up dqs io config settings */
-static void scc_mgr_load_dqs_io(void)
-{
- writel(0, &sdr_scc_mgr->dqs_io_ena);
-}
-
-/* load up dq config settings */
-static void scc_mgr_load_dq(uint32_t dq_in_group)
-{
- writel(dq_in_group, &sdr_scc_mgr->dq_ena);
-}
-
-/* load up dm config settings */
-static void scc_mgr_load_dm(uint32_t dm)
-{
- writel(dm, &sdr_scc_mgr->dm_ena);
-}
-
/*
* apply and load a particular input delay for the DQ pins in a group
* group_bgn is the index of the first dq pin (in the write group)