driver/ddr/fsl: Add workaround for erratum A-009801
The initial training for the DDRC may provide results that are not
optimized. The workaround provides better read timing margins.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index a24dc28..6529281 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -134,6 +134,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A008751
#define CONFIG_SYS_FSL_ERRATUM_A009635
#define CONFIG_SYS_FSL_ERRATUM_A009663
+#define CONFIG_SYS_FSL_ERRATUM_A009801
#define CONFIG_SYS_FSL_ERRATUM_A009803
#define CONFIG_SYS_FSL_ERRATUM_A009942
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index 7cdb700..1dc0631 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -251,6 +251,13 @@
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009801
+ temp32 = ddr_in32(&ddr->debug[25]);
+ temp32 &= ~DDR_CAS_TO_PRE_SUB_MASK;
+ temp32 |= 9 << DDR_CAS_TO_PRE_SUB_SHIFT;
+ ddr_out32(&ddr->debug[25], temp32);
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
tmp = ddr_in32(&ddr->debug[28]);
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index acddf14..486e47e 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -189,6 +189,10 @@
#define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */
#define DDR_MR5_CA_PARITY_LAT_5_CLK 0x2 /* for DDR4-2400 */
+/* DEBUG_26 register */
+#define DDR_CAS_TO_PRE_SUB_MASK 0x0000f000 /* CAS to preamble subtract value */
+#define DDR_CAS_TO_PRE_SUB_SHIFT 12
+
/* DEBUG_29 register */
#define DDR_TX_BD_DIS (1 << 10) /* Transmit Bit Deskew Disable */