USB: S5P: Add ehci support

This patch adds ehci driver support for s5p.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
diff --git a/arch/arm/include/asm/arch-exynos/ehci-s5p.h b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
new file mode 100644
index 0000000..68feb85
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/ehci-s5p.h
@@ -0,0 +1,66 @@
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+
+#define CLK_24MHZ		5
+
+#define HOST_CTRL0_PHYSWRSTALL			(1 << 31)
+#define HOST_CTRL0_COMMONON_N			(1 << 9)
+#define HOST_CTRL0_SIDDQ			(1 << 6)
+#define HOST_CTRL0_FORCESLEEP			(1 << 5)
+#define HOST_CTRL0_FORCESUSPEND			(1 << 4)
+#define HOST_CTRL0_WORDINTERFACE		(1 << 3)
+#define HOST_CTRL0_UTMISWRST			(1 << 2)
+#define HOST_CTRL0_LINKSWRST			(1 << 1)
+#define HOST_CTRL0_PHYSWRST			(1 << 0)
+
+#define HOST_CTRL0_FSEL_MASK			(7 << 16)
+
+#define EHCICTRL_ENAINCRXALIGN			(1 << 29)
+#define EHCICTRL_ENAINCR4			(1 << 28)
+#define EHCICTRL_ENAINCR8			(1 << 27)
+#define EHCICTRL_ENAINCR16			(1 << 26)
+
+/* Register map for PHY control */
+struct s5p_usb_phy {
+	unsigned int usbphyctrl0;
+	unsigned int usbphytune0;
+	unsigned int reserved1[2];
+	unsigned int hsicphyctrl1;
+	unsigned int hsicphytune1;
+	unsigned int reserved2[2];
+	unsigned int hsicphyctrl2;
+	unsigned int hsicphytune2;
+	unsigned int reserved3[2];
+	unsigned int ehcictrl;
+	unsigned int ohcictrl;
+	unsigned int usbotgsys;
+	unsigned int reserved4;
+	unsigned int usbotgtune;
+};
+
+/* Switch on the VBUS power. */
+int board_usb_vbus_init(void);
+
+#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */