ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
To support such configurations, we "only" map the first 2GB via the TLB's. We
need some free virtual address space for the remaining peripherals like, SoC
devices, FLASH etc.
Note that ECC is currently not supported on configurations with more than 2GB
SDRAM. This is because we only map the first 2GB on such systems, and therefore
the ECC parity byte of the remaining area can't be written.
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index c28fc46..9a5340c 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -138,6 +138,20 @@
#endif
/*
+ * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ * To support such configurations, we "only" map the first 2GB via the TLB's. We
+ * need some free virtual address space for the remaining peripherals like, SoC
+ * devices, FLASH etc.
+ *
+ * Note that ECC is currently not supported on configurations with more than 2GB
+ * SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ * the ECC parity byte of the remaining area can't be written.
+ */
+#ifndef CONFIG_MAX_MEM_MAPPED
+#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
+#endif
+
+/*
* Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
*/
void __spd_ddr_init_hang (void)
@@ -181,7 +195,7 @@
/*-----------------------------------------------------------------------------+
* Prototypes
*-----------------------------------------------------------------------------*/
-static unsigned long sdram_memsize(void);
+static phys_size_t sdram_memsize(void);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -306,9 +320,9 @@
/*-----------------------------------------------------------------------------+
* sdram_memsize
*-----------------------------------------------------------------------------*/
-static unsigned long sdram_memsize(void)
+static phys_size_t sdram_memsize(void)
{
- unsigned long mem_size;
+ phys_size_t mem_size;
unsigned long mcopt2;
unsigned long mcstat;
unsigned long mb0cf;
@@ -364,6 +378,8 @@
mem_size+=4096;
break;
default:
+ printf("WARNING: Unsupported bank size (SDSZ=0x%x)!\n"
+ , sdsz);
mem_size=0;
break;
}
@@ -371,8 +387,7 @@
}
}
- mem_size *= 1024 * 1024;
- return(mem_size);
+ return mem_size << 20;
}
/*-----------------------------------------------------------------------------+
@@ -400,7 +415,7 @@
unsigned long val;
ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
int write_recovery;
- unsigned long dram_size = 0;
+ phys_size_t dram_size = 0;
num_dimm_banks = sizeof(iic0_dimm_addr);
@@ -558,6 +573,12 @@
/* get installed memory size */
dram_size = sdram_memsize();
+ /*
+ * Limit size to 2GB
+ */
+ if (dram_size > CONFIG_MAX_MEM_MAPPED)
+ dram_size = CONFIG_MAX_MEM_MAPPED;
+
/* and program tlb entries for this size (dynamic) */
/*
@@ -595,7 +616,7 @@
*/
set_mcsr(get_mcsr());
- return dram_size;
+ return sdram_memsize();
}
static void get_spd_info(unsigned long *dimm_populated,
@@ -2133,15 +2154,15 @@
unsigned long num_dimm_banks)
{
unsigned long dimm_num;
- unsigned long rank_base_addr;
+ phys_size_t rank_base_addr;
unsigned long rank_reg;
- unsigned long rank_size_bytes;
+ phys_size_t rank_size_bytes;
unsigned long rank_size_id;
unsigned long num_ranks;
unsigned long baseadd_size;
unsigned long i;
unsigned long bank_0_populated = 0;
- unsigned long total_size = 0;
+ phys_size_t total_size = 0;
/*------------------------------------------------------------------
* Reset the rank_base_address.
@@ -2289,6 +2310,11 @@
if (ecc == 0)
return;
+ if (sdram_memsize() > CONFIG_MAX_MEM_MAPPED) {
+ printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
+ return;
+ }
+
mfsdram(SDRAM_MCOPT1, mcopt1);
mfsdram(SDRAM_MCOPT2, mcopt2);
@@ -2441,6 +2467,7 @@
u32 bxcf;
int i;
int j;
+ phys_size_t base_addr;
u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
@@ -2467,10 +2494,17 @@
if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
/* Bank is enabled */
+ /*
+ * Only run test on accessable memory (below 2GB)
+ */
+ base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
+ if (base_addr >= CONFIG_MAX_MEM_MAPPED)
+ continue;
+
/*------------------------------------------------------------------
* Run the short memory test.
*-----------------------------------------------------------------*/
- membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+ membase = (u32 *)(u32)base_addr;
for (i = 0; i < NUMMEMTESTS; i++) {
for (j = 0; j < NUMMEMWORDS; j++) {