mx6sx: Adjust enable_fec_anatop_clock() for mx6solox
Configure and enable the ethernet clock for mx6solox.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index abd9d61..820b8d5 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -373,6 +373,27 @@
reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
writel(reg, &anatop->pll_enet);
+#ifdef CONFIG_MX6SX
+ /*
+ * Set enet ahb clock to 200MHz
+ * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+ */
+ reg = readl(&imx_ccm->chsccdr);
+ reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK
+ | MXC_CCM_CHSCCDR_ENET_PODF_MASK
+ | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK);
+ /* PLL2 PFD2 */
+ reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET);
+ /* Div = 2*/
+ reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET);
+ reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET);
+ writel(reg, &imx_ccm->chsccdr);
+
+ /* Enable enet system clock */
+ reg = readl(&imx_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_ENET_MASK;
+ writel(reg, &imx_ccm->CCGR3);
+#endif
return 0;
}
#endif