Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
diff --git a/Makefile b/Makefile
index fffc188..c30f90a 100644
--- a/Makefile
+++ b/Makefile
@@ -936,8 +936,19 @@
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
+# If .u-boot.cfg.d is still present, then either:
+# a) The previous build used a Makefile that used if_changed rather than
+# if_changed_dep when building u-boot.cfg, and hence any later builds will
+# be unaware of the dependencies for u-boot.cfg. In this case, we must
+# delete u-boot.cfg to force it and .u-boot.cfg.cmd to be rebuilt the
+# correct way.
+# b) The previous build failed or was interrupted while building u-boot.cfg,
+# so deleting u-boot.cfg isn't going to cause any additional work.
+ifneq ($(wildcard $(obj)/.u-boot.cfg.d),)
+ unused := $(shell rm -f $(obj)/u-boot.cfg)
+endif
u-boot.cfg: include/config.h FORCE
- $(call if_changed,cpp_cfg)
+ $(call if_changed_dep,cpp_cfg)
# Check that this build does not use CONFIG options that we don't know about
# unless they are in Kconfig. All the existing CONFIG options are whitelisted,
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 21066f0..097ad58 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -26,6 +26,8 @@
select DM
select DM_SERIAL
select DYNAMIC_IO_PORT_BASE
+ select MIPS_CM
+ select MIPS_L2_CACHE
select OF_CONTROL
select OF_ISA_BUS
select SUPPORTS_BIG_ENDIAN
@@ -73,10 +75,43 @@
select OF_CONTROL
select DM
+config TARGET_BOSTON
+ bool "Support Boston"
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
+ select MIPS_CM
+ select MIPS_L1_CACHE_SHIFT_6
+ select MIPS_L2_CACHE
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_LITTLE_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_CPU_MIPS32_R6
+ select SUPPORTS_CPU_MIPS64_R1
+ select SUPPORTS_CPU_MIPS64_R2
+ select SUPPORTS_CPU_MIPS64_R6
+
+config TARGET_XILFPGA
+ bool "Support Imagination Xilfpga"
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
+ select DM_GPIO
+ select DM_ETH
+ select SUPPORTS_LITTLE_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select MIPS_L1_CACHE_SHIFT_4
+ help
+ This supports IMGTEC MIPSfpga platform
+
endchoice
source "board/dbau1x00/Kconfig"
+source "board/imgtec/boston/Kconfig"
source "board/imgtec/malta/Kconfig"
+source "board/imgtec/xilfpga/Kconfig"
source "board/micronas/vct/Kconfig"
source "board/pb1x00/Kconfig"
source "board/qemu-mips/Kconfig"
@@ -300,9 +335,31 @@
default "4" if MIPS_L1_CACHE_SHIFT_4
default "5"
+config MIPS_L2_CACHE
+ bool
+ help
+ Select this if your system includes an L2 cache and you want U-Boot
+ to initialise & maintain it.
+
config DYNAMIC_IO_PORT_BASE
bool
+config MIPS_CM
+ bool
+ help
+ Select this if your system contains a MIPS Coherence Manager and you
+ wish U-Boot to configure it or make use of it to retrieve system
+ information such as cache configuration.
+
+config MIPS_CM_BASE
+ hex
+ default 0x1fbf8000
+ help
+ The physical base address at which to map the MIPS Coherence Manager
+ Global Configuration Registers (GCRs). This should be set such that
+ the GCRs occupy a region of the physical address space which is
+ otherwise unused, or at minimum that software doesn't need to access.
+
endif
endmenu
diff --git a/arch/mips/cpu/Makefile b/arch/mips/cpu/Makefile
index fc6b455..429fd3a 100644
--- a/arch/mips/cpu/Makefile
+++ b/arch/mips/cpu/Makefile
@@ -7,3 +7,5 @@
obj-y += time.o
obj-y += interrupts.o
obj-y += cpu.o
+
+obj-$(CONFIG_MIPS_CM) += cm_init.o
diff --git a/arch/mips/cpu/cm_init.S b/arch/mips/cpu/cm_init.S
new file mode 100644
index 0000000..ddcaa49
--- /dev/null
+++ b/arch/mips/cpu/cm_init.S
@@ -0,0 +1,45 @@
+/*
+ * MIPS Coherence Manager (CM) Initialisation
+ *
+ * Copyright (c) 2016 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/cm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+
+LEAF(mips_cm_map)
+ /* Config3 must exist for a CM to be present */
+ mfc0 t0, CP0_CONFIG, 1
+ bgez t0, 2f
+ mfc0 t0, CP0_CONFIG, 2
+ bgez t0, 2f
+
+ /* Check Config3.CMGCR to determine CM presence */
+ mfc0 t0, CP0_CONFIG, 3
+ and t0, t0, MIPS_CONF3_CMGCR
+ beqz t0, 2f
+
+ /* Find the current physical GCR base address */
+1: MFC0 t0, CP0_CMGCRBASE
+ PTR_SLL t0, t0, 4
+
+ /* If the GCRs are where we want, we're done */
+ PTR_LI t1, CONFIG_MIPS_CM_BASE
+ beq t0, t1, 2f
+
+ /* Move the GCRs to our configured base address */
+ PTR_LI t2, CKSEG1
+ PTR_ADDU t0, t0, t2
+ sw zero, GCR_BASE_UPPER(t0)
+ sw t1, GCR_BASE(t0)
+
+ /* Re-check the GCR base */
+ b 1b
+
+2: jr ra
+ END(mips_cm_map)
diff --git a/arch/mips/cpu/cpu.c b/arch/mips/cpu/cpu.c
index 391feb3..1b919ed 100644
--- a/arch/mips/cpu/cpu.c
+++ b/arch/mips/cpu/cpu.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <command.h>
#include <linux/compiler.h>
+#include <asm/cache.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
@@ -35,3 +36,9 @@
write_c0_index(index);
tlb_write_indexed();
}
+
+int arch_cpu_init(void)
+{
+ mips_cache_probe();
+ return 0;
+}
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index fc6dd66..3f0fc12 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -12,10 +12,6 @@
#include <asm/regdef.h>
#include <asm/mipsregs.h>
-#ifndef CONFIG_SYS_MIPS_CACHE_MODE
-#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
-#endif
-
#ifndef CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
CONFIG_SYS_INIT_SP_OFFSET)
@@ -112,9 +108,28 @@
.align 4
reset:
+#if __mips_isa_rev >= 6
+ mfc0 t0, CP0_CONFIG, 5
+ and t0, t0, MIPS_CONF5_VP
+ beqz t0, 1f
+ nop
+
+ b 2f
+ mfc0 t0, CP0_GLOBALNUMBER
+#endif
+
+1: mfc0 t0, CP0_EBASE
+ and t0, t0, EBASE_CPUNUM
+
+ /* Hang if this isn't the first CPU in the system */
+2: beqz t0, 4f
+ nop
+3: wait
+ b 3b
+ nop
/* Clear watch registers */
- MTC0 zero, CP0_WATCHLO
+4: MTC0 zero, CP0_WATCHLO
mtc0 zero, CP0_WATCHHI
/* WP(Watch Pending), SW0/1 should be cleared */
@@ -127,9 +142,11 @@
mtc0 zero, CP0_COMPARE
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
- /* CONFIG0 register */
- li t0, CONF_CM_UNCACHED
+ mfc0 t0, CP0_CONFIG
+ and t0, t0, MIPS_CONF_IMPL
+ or t0, t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
+ ehb
#endif
/*
@@ -144,20 +161,31 @@
1:
PTR_L gp, 0(ra)
+#ifdef CONFIG_MIPS_CM
+ PTR_LA t9, mips_cm_map
+ jalr t9
+ nop
+#endif
+
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+# ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* Initialize any external memory */
PTR_LA t9, lowlevel_init
jalr t9
nop
+# endif
/* Initialize caches... */
PTR_LA t9, mips_cache_reset
jalr t9
nop
- /* ... and enable them */
- li t0, CONFIG_SYS_MIPS_CACHE_MODE
- mtc0 t0, CP0_CONFIG
+# ifndef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
+ /* Initialize any external memory */
+ PTR_LA t9, lowlevel_init
+ jalr t9
+ nop
+# endif
#endif
/* Set up temporary stack */
@@ -214,12 +242,9 @@
PTR_LI t0, CONFIG_SYS_MONITOR_BASE
PTR_SUB s1, s2, t0 # s1 <-- relocation offset
- PTR_LA t3, in_ram
- PTR_L t2, -(3 * PTRSIZE)(t3) # t2 <-- __image_copy_end
+ PTR_LA t2, __image_copy_end
move t1, a2
- PTR_ADD gp, s1 # adjust gp
-
/*
* t0 = source address
* t1 = target address
@@ -232,32 +257,14 @@
blt t0, t2, 1b
PTR_ADDU t1, PTRSIZE
- /* If caches were enabled, we would have to flush them here. */
- PTR_SUB a1, t1, s2 # a1 <-- size
- PTR_LA t9, flush_cache
- jalr t9
- move a0, s2 # a0 <-- destination address
-
- /* Jump to where we've relocated ourselves */
- PTR_ADDIU t0, s2, in_ram - _start
- jr t0
- nop
-
- PTR __rel_dyn_end
- PTR __rel_dyn_start
- PTR __image_copy_end
- PTR _GLOBAL_OFFSET_TABLE_
- PTR num_got_entries
-
-in_ram:
/*
* Now we want to update GOT.
*
* GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
* generated by GNU ld. Skip these reserved entries from relocation.
*/
- PTR_L t3, -(1 * PTRSIZE)(t0) # t3 <-- num_got_entries
- PTR_L t8, -(2 * PTRSIZE)(t0) # t8 <-- _GLOBAL_OFFSET_TABLE_
+ PTR_LA t3, num_got_entries
+ PTR_LA t8, _GLOBAL_OFFSET_TABLE_
PTR_ADD t8, s1 # t8 now holds relocated _G_O_T_
PTR_ADDIU t8, t8, 2 * PTRSIZE # skipping first two entries
PTR_LI t2, 2
@@ -272,8 +279,8 @@
PTR_ADDIU t8, PTRSIZE
/* Update dynamic relocations */
- PTR_L t1, -(4 * PTRSIZE)(t0) # t1 <-- __rel_dyn_start
- PTR_L t2, -(5 * PTRSIZE)(t0) # t2 <-- __rel_dyn_end
+ PTR_LA t1, __rel_dyn_start
+ PTR_LA t2, __rel_dyn_end
b 2f # skip first reserved entry
PTR_ADDIU t1, 2 * PTRSIZE
@@ -298,6 +305,20 @@
PTR_ADDIU t1, 2 * PTRSIZE # each rel.dyn entry is 2*PTRSIZE bytes
/*
+ * Flush caches to ensure our newly modified instructions are visible
+ * to the instruction cache. We're still running with the old GOT, so
+ * apply the reloc offset to the start address.
+ */
+ PTR_LA a0, __text_start
+ PTR_LA a1, __text_end
+ PTR_SUB a1, a1, a0
+ PTR_LA t9, flush_cache
+ jalr t9
+ PTR_ADD a0, s1
+
+ PTR_ADD gp, s1 # adjust gp
+
+ /*
* Clear BSS
*
* GOT is now relocated. Thus __bss_start and __bss_end can be
diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds
index 7d71c11..0129c99 100644
--- a/arch/mips/cpu/u-boot.lds
+++ b/arch/mips/cpu/u-boot.lds
@@ -19,7 +19,9 @@
. = ALIGN(4);
.text : {
+ __text_start = .;
*(.text*)
+ __text_end = .;
}
. = ALIGN(4);
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index 2f04d73..30fcc2b 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -4,8 +4,10 @@
dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
+dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb
dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb
dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
+dtb-$(CONFIG_TARGET_XILFPGA) += nexys4ddr.dtb
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
targets += $(dtb-y)
diff --git a/arch/mips/dts/img,boston.dts b/arch/mips/dts/img,boston.dts
new file mode 100644
index 0000000..1d4eeda
--- /dev/null
+++ b/arch/mips/dts/img,boston.dts
@@ -0,0 +1,222 @@
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ gic: interrupt-controller {
+ compatible = "mti,gic";
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ pci0: pci@10000000 {
+ status = "disabled";
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 0>,
+ <0 0 0 2 &pci0_intc 1>,
+ <0 0 0 3 &pci0_intc 2>,
+ <0 0 0 4 &pci0_intc 3>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ status = "disabled";
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 0>,
+ <0 0 0 2 &pci1_intc 1>,
+ <0 0 0 3 &pci1_intc 2>,
+ <0 0 0 4 &pci1_intc 3>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 0>,
+ <0 0 0 2 &pci2_intc 1>,
+ <0 0 0 3 &pci2_intc 2>,
+ <0 0 0 4 &pci2_intc 3>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0x68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ u-boot,dm-pre-reloc;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+
+ u-boot,dm-pre-reloc;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+
+ flash@18000000 {
+ compatible = "cfi-flash";
+ reg = <0x18000000 0x8000000>;
+ bank-width = <2>;
+ };
+};
diff --git a/arch/mips/dts/microAptiv.dtsi b/arch/mips/dts/microAptiv.dtsi
new file mode 100644
index 0000000..81d518e
--- /dev/null
+++ b/arch/mips/dts/microAptiv.dtsi
@@ -0,0 +1,21 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,xilfpga";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,m14Kc";
+ clocks = <&ext>;
+ reg = <0>;
+ };
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
diff --git a/arch/mips/dts/nexys4ddr.dts b/arch/mips/dts/nexys4ddr.dts
new file mode 100644
index 0000000..e254ab1
--- /dev/null
+++ b/arch/mips/dts/nexys4ddr.dts
@@ -0,0 +1,62 @@
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+ compatible = "digilent,nexys4ddr";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ cpuintc: interrupt-controller@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ aliases {
+ console = &axi_uart16550;
+ };
+
+ axi_ethernetlite: ethernet@10e00000 {
+ compatible = "xlnx,xps-ethernetlite-1.00.a";
+ device_type = "network";
+ local-mac-address = [08 86 4C 0D F7 09];
+ phy-handle = <&phy0>;
+ reg = <0x10e00000 0x10000>;
+ xlnx,duplex = <0x1>;
+ xlnx,include-global-buffers = <0x1>;
+ xlnx,include-internal-loopback = <0x0>;
+ xlnx,include-mdio = <0x1>;
+ xlnx,instance = "axi_ethernetlite_inst";
+ xlnx,rx-ping-pong = <0x1>;
+ xlnx,s-axi-id-width = <0x1>;
+ xlnx,tx-ping-pong = <0x1>;
+ xlnx,use-internal = <0x0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@1 {
+ compatible = <0x0007c0f0 0xfffffff0>;
+ device_type = "ethernet-phy";
+ reg = <1>;
+ } ;
+ } ;
+ } ;
+
+
+ axi_uart16550: serial@10400000 {
+ compatible = "ns16550a";
+ reg = <0x10400000 0x10000>;
+
+ reg-shift = <2>;
+ reg-offset = <0x1000>;
+
+ clock-frequency = <50000000>;
+
+ };
+};
+
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
index 0cea581..669c362 100644
--- a/arch/mips/include/asm/cache.h
+++ b/arch/mips/include/asm/cache.h
@@ -19,4 +19,13 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE ARCH_DMA_MINALIGN
+/**
+ * mips_cache_probe() - Probe the properties of the caches
+ *
+ * Call this to probe the properties such as line sizes of the caches
+ * present in the system, if any. This must be done before cache maintenance
+ * functions such as flush_cache may be called.
+ */
+void mips_cache_probe(void);
+
#endif /* __MIPS_CACHE_H__ */
diff --git a/arch/mips/include/asm/cm.h b/arch/mips/include/asm/cm.h
new file mode 100644
index 0000000..b9ab0c6
--- /dev/null
+++ b/arch/mips/include/asm/cm.h
@@ -0,0 +1,62 @@
+/*
+ * MIPS Coherence Manager (CM) Register Definitions
+ *
+ * Copyright (c) 2016 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __MIPS_ASM_CM_H__
+#define __MIPS_ASM_CM_H__
+
+/* Global Control Register (GCR) offsets */
+#define GCR_BASE 0x0008
+#define GCR_BASE_UPPER 0x000c
+#define GCR_REV 0x0030
+#define GCR_L2_CONFIG 0x0130
+#define GCR_L2_TAG_ADDR 0x0600
+#define GCR_L2_TAG_ADDR_UPPER 0x0604
+#define GCR_L2_TAG_STATE 0x0608
+#define GCR_L2_TAG_STATE_UPPER 0x060c
+#define GCR_L2_DATA 0x0610
+#define GCR_L2_DATA_UPPER 0x0614
+#define GCR_Cx_COHERENCE 0x2008
+
+/* GCR_REV CM versions */
+#define GCR_REV_CM3 0x0800
+
+/* GCR_L2_CONFIG fields */
+#define GCR_L2_CONFIG_ASSOC_SHIFT 0
+#define GCR_L2_CONFIG_ASSOC_BITS 8
+#define GCR_L2_CONFIG_LINESZ_SHIFT 8
+#define GCR_L2_CONFIG_LINESZ_BITS 4
+#define GCR_L2_CONFIG_SETSZ_SHIFT 12
+#define GCR_L2_CONFIG_SETSZ_BITS 4
+#define GCR_L2_CONFIG_BYPASS (1 << 20)
+
+/* GCR_Cx_COHERENCE */
+#define GCR_Cx_COHERENCE_DOM_EN (0xff << 0)
+#define GCR_Cx_COHERENCE_EN (0x1 << 0)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/io.h>
+
+static inline void *mips_cm_base(void)
+{
+ return (void *)CKSEG1ADDR(CONFIG_MIPS_CM_BASE);
+}
+
+static inline unsigned long mips_cm_l2_line_size(void)
+{
+ unsigned long l2conf, line_sz;
+
+ l2conf = __raw_readl(mips_cm_base() + GCR_L2_CONFIG);
+
+ line_sz = l2conf >> GCR_L2_CONFIG_LINESZ_SHIFT;
+ line_sz &= GENMASK(GCR_L2_CONFIG_LINESZ_BITS - 1, 0);
+ return line_sz ? (2 << line_sz) : 0;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __MIPS_ASM_CM_H__ */
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index 37f8ed5..0078bbe 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -21,6 +21,13 @@
unsigned long rev;
unsigned long ver;
#endif
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ unsigned short l1i_line_size;
+ unsigned short l1d_line_size;
+#endif
+#ifdef CONFIG_MIPS_L2_CACHE
+ unsigned short l2_line_size;
+#endif
};
#include <asm-generic/global_data.h>
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 3185dc7..9ab5063 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -39,6 +39,7 @@
#define CP0_ENTRYLO0 $2
#define CP0_ENTRYLO1 $3
#define CP0_CONF $3
+#define CP0_GLOBALNUMBER $3, 1
#define CP0_CONTEXT $4
#define CP0_PAGEMASK $5
#define CP0_WIRED $6
@@ -361,6 +362,11 @@
#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
+ * Bits in the coprocessor 0 EBase register.
+ */
+#define EBASE_CPUNUM 0x3ff
+
+/*
* Bits in the coprocessor 0 config register.
*/
/* Generic bits. */
@@ -450,6 +456,7 @@
#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_IMPL (_ULCAST_(0x1ff) << 16)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
@@ -484,9 +491,13 @@
#define MIPS_CONF1_TLBS_SIZE (6)
#define MIPS_CONF1_TLBS (_ULCAST_(63) << MIPS_CONF1_TLBS_SHIFT)
+#define MIPS_CONF2_SA_SHF 0
#define MIPS_CONF2_SA (_ULCAST_(15) << 0)
+#define MIPS_CONF2_SL_SHF 4
#define MIPS_CONF2_SL (_ULCAST_(15) << 4)
+#define MIPS_CONF2_SS_SHF 8
#define MIPS_CONF2_SS (_ULCAST_(15) << 8)
+#define MIPS_CONF2_L2B (_ULCAST_(1) << 12)
#define MIPS_CONF2_SU (_ULCAST_(15) << 12)
#define MIPS_CONF2_TA (_ULCAST_(15) << 16)
#define MIPS_CONF2_TL (_ULCAST_(15) << 20)
@@ -548,8 +559,10 @@
#define MIPS_CONF5_MRP (_ULCAST_(1) << 3)
#define MIPS_CONF5_LLB (_ULCAST_(1) << 4)
#define MIPS_CONF5_MVH (_ULCAST_(1) << 5)
+#define MIPS_CONF5_VP (_ULCAST_(1) << 7)
#define MIPS_CONF5_FRE (_ULCAST_(1) << 8)
#define MIPS_CONF5_UFE (_ULCAST_(1) << 9)
+#define MIPS_CONF5_L2C (_ULCAST_(1) << 10)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
#define MIPS_CONF5_EVA (_ULCAST_(1) << 28)
#define MIPS_CONF5_CV (_ULCAST_(1) << 29)
diff --git a/arch/mips/lib/cache.c b/arch/mips/lib/cache.c
index db81953..bd14ba6 100644
--- a/arch/mips/lib/cache.c
+++ b/arch/mips/lib/cache.c
@@ -7,34 +7,85 @@
#include <common.h>
#include <asm/cacheops.h>
+#include <asm/cm.h>
#include <asm/mipsregs.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+static void probe_l2(void)
+{
+#ifdef CONFIG_MIPS_L2_CACHE
+ unsigned long conf2, sl;
+ bool l2c = false;
+
+ if (!(read_c0_config1() & MIPS_CONF_M))
+ return;
+
+ conf2 = read_c0_config2();
+
+ if (__mips_isa_rev >= 6) {
+ l2c = conf2 & MIPS_CONF_M;
+ if (l2c)
+ l2c = read_c0_config3() & MIPS_CONF_M;
+ if (l2c)
+ l2c = read_c0_config4() & MIPS_CONF_M;
+ if (l2c)
+ l2c = read_c0_config5() & MIPS_CONF5_L2C;
+ }
+
+ if (l2c && config_enabled(CONFIG_MIPS_CM)) {
+ gd->arch.l2_line_size = mips_cm_l2_line_size();
+ } else if (l2c) {
+ /* We don't know how to retrieve L2 config on this system */
+ BUG();
+ } else {
+ sl = (conf2 & MIPS_CONF2_SL) >> MIPS_CONF2_SL_SHF;
+ gd->arch.l2_line_size = sl ? (2 << sl) : 0;
+ }
+#endif
+}
+
+void mips_cache_probe(void)
+{
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ unsigned long conf1, il, dl;
+
+ conf1 = read_c0_config1();
+
+ il = (conf1 & MIPS_CONF1_IL) >> MIPS_CONF1_IL_SHF;
+ dl = (conf1 & MIPS_CONF1_DL) >> MIPS_CONF1_DL_SHF;
+
+ gd->arch.l1i_line_size = il ? (2 << il) : 0;
+ gd->arch.l1d_line_size = dl ? (2 << dl) : 0;
+#endif
+ probe_l2();
+}
+
static inline unsigned long icache_line_size(void)
{
- unsigned long conf1, il;
-
- if (!config_enabled(CONFIG_SYS_CACHE_SIZE_AUTO))
- return CONFIG_SYS_ICACHE_LINE_SIZE;
-
- conf1 = read_c0_config1();
- il = (conf1 & MIPS_CONF1_IL) >> MIPS_CONF1_IL_SHF;
- if (!il)
- return 0;
- return 2 << il;
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ return gd->arch.l1i_line_size;
+#else
+ return CONFIG_SYS_ICACHE_LINE_SIZE;
+#endif
}
static inline unsigned long dcache_line_size(void)
{
- unsigned long conf1, dl;
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ return gd->arch.l1d_line_size;
+#else
+ return CONFIG_SYS_DCACHE_LINE_SIZE;
+#endif
+}
- if (!config_enabled(CONFIG_SYS_CACHE_SIZE_AUTO))
- return CONFIG_SYS_DCACHE_LINE_SIZE;
-
- conf1 = read_c0_config1();
- dl = (conf1 & MIPS_CONF1_DL) >> MIPS_CONF1_DL_SHF;
- if (!dl)
- return 0;
- return 2 << dl;
+static inline unsigned long scache_line_size(void)
+{
+#ifdef CONFIG_MIPS_L2_CACHE
+ return gd->arch.l2_line_size;
+#else
+ return 0;
+#endif
}
#define cache_loop(start, end, lsize, ops...) do { \
@@ -53,12 +104,13 @@
{
unsigned long ilsize = icache_line_size();
unsigned long dlsize = dcache_line_size();
+ unsigned long slsize = scache_line_size();
/* aend will be miscalculated when size is zero, so we return here */
if (size == 0)
return;
- if (ilsize == dlsize) {
+ if ((ilsize == dlsize) && !slsize) {
/* flush I-cache & D-cache simultaneously */
cache_loop(start_addr, start_addr + size, ilsize,
HIT_WRITEBACK_INV_D, HIT_INVALIDATE_I);
@@ -68,6 +120,11 @@
/* flush D-cache */
cache_loop(start_addr, start_addr + size, dlsize, HIT_WRITEBACK_INV_D);
+ /* flush L2 cache */
+ if (slsize)
+ cache_loop(start_addr, start_addr + size, slsize,
+ HIT_WRITEBACK_INV_SD);
+
/* flush I-cache */
cache_loop(start_addr, start_addr + size, ilsize, HIT_INVALIDATE_I);
}
@@ -75,21 +132,31 @@
void flush_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = dcache_line_size();
+ unsigned long slsize = scache_line_size();
/* aend will be miscalculated when size is zero, so we return here */
if (start_addr == stop)
return;
cache_loop(start_addr, stop, lsize, HIT_WRITEBACK_INV_D);
+
+ /* flush L2 cache */
+ if (slsize)
+ cache_loop(start_addr, stop, slsize, HIT_WRITEBACK_INV_SD);
}
void invalidate_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = dcache_line_size();
+ unsigned long slsize = scache_line_size();
/* aend will be miscalculated when size is zero, so we return here */
if (start_addr == stop)
return;
+ /* invalidate L2 cache */
+ if (slsize)
+ cache_loop(start_addr, stop, slsize, HIT_INVALIDATE_SD);
+
cache_loop(start_addr, stop, lsize, HIT_INVALIDATE_D);
}
diff --git a/arch/mips/lib/cache_init.S b/arch/mips/lib/cache_init.S
index bc8ab27..698a5af 100644
--- a/arch/mips/lib/cache_init.S
+++ b/arch/mips/lib/cache_init.S
@@ -13,6 +13,7 @@
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
+#include <asm/cm.h>
#ifndef CONFIG_SYS_MIPS_CACHE_MODE
#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
@@ -95,22 +96,147 @@
* with good parity is available. This routine will initialise an area of
* memory starting at location zero to be used as a source of parity.
*
+ * Note that this function does not follow the standard calling convention &
+ * may clobber typically callee-saved registers.
+ *
* RETURNS: N/A
*
*/
+#define R_RETURN s0
+#define R_IC_SIZE s1
+#define R_IC_LINE s2
+#define R_DC_SIZE s3
+#define R_DC_LINE s4
+#define R_L2_SIZE s5
+#define R_L2_LINE s6
+#define R_L2_BYPASSED s7
+#define R_L2_L2C t8
LEAF(mips_cache_reset)
-#ifndef CONFIG_SYS_CACHE_SIZE_AUTO
- li t2, CONFIG_SYS_ICACHE_SIZE
- li t8, CONFIG_SYS_ICACHE_LINE_SIZE
-#else
- l1_info t2, t8, MIPS_CONF1_IA_SHF
+ move R_RETURN, ra
+
+#ifdef CONFIG_MIPS_L2_CACHE
+ /*
+ * For there to be an L2 present, Config2 must be present. If it isn't
+ * then we proceed knowing there's no L2 cache.
+ */
+ move R_L2_SIZE, zero
+ move R_L2_LINE, zero
+ move R_L2_BYPASSED, zero
+ move R_L2_L2C, zero
+ mfc0 t0, CP0_CONFIG, 1
+ bgez t0, l2_probe_done
+
+ /*
+ * From MIPSr6 onwards the L2 cache configuration might not be reported
+ * by Config2. The Config5.L2C bit indicates whether this is the case,
+ * and if it is then we need knowledge of where else to look. For cores
+ * from Imagination Technologies this is a CM GCR.
+ */
+# if __mips_isa_rev >= 6
+ /* Check that Config5 exists */
+ mfc0 t0, CP0_CONFIG, 2
+ bgez t0, l2_probe_cop0
+ mfc0 t0, CP0_CONFIG, 3
+ bgez t0, l2_probe_cop0
+ mfc0 t0, CP0_CONFIG, 4
+ bgez t0, l2_probe_cop0
+
+ /* Check Config5.L2C is set */
+ mfc0 t0, CP0_CONFIG, 5
+ and R_L2_L2C, t0, MIPS_CONF5_L2C
+ beqz R_L2_L2C, l2_probe_cop0
+
+ /* Config5.L2C is set */
+# ifdef CONFIG_MIPS_CM
+ /* The CM will provide L2 configuration */
+ PTR_LI t0, CKSEG1ADDR(CONFIG_MIPS_CM_BASE)
+ lw t1, GCR_L2_CONFIG(t0)
+ bgez t1, l2_probe_done
+
+ ext R_L2_LINE, t1, \
+ GCR_L2_CONFIG_LINESZ_SHIFT, GCR_L2_CONFIG_LINESZ_BITS
+ beqz R_L2_LINE, l2_probe_done
+ li t2, 2
+ sllv R_L2_LINE, t2, R_L2_LINE
+
+ ext t2, t1, GCR_L2_CONFIG_ASSOC_SHIFT, GCR_L2_CONFIG_ASSOC_BITS
+ addiu t2, t2, 1
+ mul R_L2_SIZE, R_L2_LINE, t2
+
+ ext t2, t1, GCR_L2_CONFIG_SETSZ_SHIFT, GCR_L2_CONFIG_SETSZ_BITS
+ sllv R_L2_SIZE, R_L2_SIZE, t2
+ li t2, 64
+ mul R_L2_SIZE, R_L2_SIZE, t2
+
+ /* Bypass the L2 cache so that we can init the L1s early */
+ or t1, t1, GCR_L2_CONFIG_BYPASS
+ sw t1, GCR_L2_CONFIG(t0)
+ sync
+ li R_L2_BYPASSED, 1
+
+ /* Zero the L2 tag registers */
+ sw zero, GCR_L2_TAG_ADDR(t0)
+ sw zero, GCR_L2_TAG_ADDR_UPPER(t0)
+ sw zero, GCR_L2_TAG_STATE(t0)
+ sw zero, GCR_L2_TAG_STATE_UPPER(t0)
+ sw zero, GCR_L2_DATA(t0)
+ sw zero, GCR_L2_DATA_UPPER(t0)
+ sync
+# else
+ /* We don't know how to retrieve L2 configuration on this system */
+# endif
+ b l2_probe_done
+# endif
+
+ /*
+ * For pre-r6 systems, or r6 systems with Config5.L2C==0, probe the L2
+ * cache configuration from the cop0 Config2 register.
+ */
+l2_probe_cop0:
+ mfc0 t0, CP0_CONFIG, 2
+
+ srl R_L2_LINE, t0, MIPS_CONF2_SL_SHF
+ andi R_L2_LINE, R_L2_LINE, MIPS_CONF2_SL >> MIPS_CONF2_SL_SHF
+ beqz R_L2_LINE, l2_probe_done
+ li t1, 2
+ sllv R_L2_LINE, t1, R_L2_LINE
+
+ srl t1, t0, MIPS_CONF2_SA_SHF
+ andi t1, t1, MIPS_CONF2_SA >> MIPS_CONF2_SA_SHF
+ addiu t1, t1, 1
+ mul R_L2_SIZE, R_L2_LINE, t1
+
+ srl t1, t0, MIPS_CONF2_SS_SHF
+ andi t1, t1, MIPS_CONF2_SS >> MIPS_CONF2_SS_SHF
+ sllv R_L2_SIZE, R_L2_SIZE, t1
+ li t1, 64
+ mul R_L2_SIZE, R_L2_SIZE, t1
+
+ /* Attempt to bypass the L2 so that we can init the L1s early */
+ or t0, t0, MIPS_CONF2_L2B
+ mtc0 t0, CP0_CONFIG, 2
+ ehb
+ mfc0 t0, CP0_CONFIG, 2
+ and R_L2_BYPASSED, t0, MIPS_CONF2_L2B
+
+ /* Zero the L2 tag registers */
+ mtc0 zero, CP0_TAGLO, 4
+ ehb
+l2_probe_done:
#endif
#ifndef CONFIG_SYS_CACHE_SIZE_AUTO
- li t3, CONFIG_SYS_DCACHE_SIZE
- li t9, CONFIG_SYS_DCACHE_LINE_SIZE
+ li R_IC_SIZE, CONFIG_SYS_ICACHE_SIZE
+ li R_IC_LINE, CONFIG_SYS_ICACHE_LINE_SIZE
#else
- l1_info t3, t9, MIPS_CONF1_DA_SHF
+ l1_info R_IC_SIZE, R_IC_LINE, MIPS_CONF1_IA_SHF
+#endif
+
+#ifndef CONFIG_SYS_CACHE_SIZE_AUTO
+ li R_DC_SIZE, CONFIG_SYS_DCACHE_SIZE
+ li R_DC_LINE, CONFIG_SYS_DCACHE_LINE_SIZE
+#else
+ l1_info R_DC_SIZE, R_DC_LINE, MIPS_CONF1_DA_SHF
#endif
#ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
@@ -123,9 +249,9 @@
li v0, CONFIG_SYS_DCACHE_SIZE
#endif
#else
- move v0, t2
- sltu t1, t2, t3
- movn v0, t3, t1
+ move v0, R_IC_SIZE
+ sltu t1, R_IC_SIZE, R_DC_SIZE
+ movn v0, R_DC_SIZE, t1
#endif
/*
* Now clear that much memory starting from zero.
@@ -138,13 +264,36 @@
#endif /* CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD */
+#ifdef CONFIG_MIPS_L2_CACHE
+ /*
+ * If the L2 is bypassed, init the L1 first so that we can execute the
+ * rest of the cache initialisation using the L1 instruction cache.
+ */
+ bnez R_L2_BYPASSED, l1_init
+
+l2_init:
+ PTR_LI t0, INDEX_BASE
+ PTR_ADDU t1, t0, R_L2_SIZE
+1: cache INDEX_STORE_TAG_SD, 0(t0)
+ PTR_ADDU t0, t0, R_L2_LINE
+ bne t0, t1, 1b
+
+ /*
+ * If the L2 was bypassed then we already initialised the L1s before
+ * the L2, so we are now done.
+ */
+ bnez R_L2_BYPASSED, l2_unbypass
+#endif
+
/*
* The TagLo registers used depend upon the CPU implementation, but the
* architecture requires that it is safe for software to write to both
* TagLo selects 0 & 2 covering supported cases.
*/
+l1_init:
mtc0 zero, CP0_TAGLO
mtc0 zero, CP0_TAGLO, 2
+ ehb
/*
* The caches are probably in an indeterminate state, so we force good
@@ -158,40 +307,122 @@
/*
* Initialize the I-cache first,
*/
- blez t2, 1f
+ blez R_IC_SIZE, 1f
PTR_LI t0, INDEX_BASE
- PTR_ADDU t1, t0, t2
+ PTR_ADDU t1, t0, R_IC_SIZE
/* clear tag to invalidate */
- cache_loop t0, t1, t8, INDEX_STORE_TAG_I
+ cache_loop t0, t1, R_IC_LINE, INDEX_STORE_TAG_I
#ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* fill once, so data field parity is correct */
PTR_LI t0, INDEX_BASE
- cache_loop t0, t1, t8, FILL
+ cache_loop t0, t1, R_IC_LINE, FILL
/* invalidate again - prudent but not strictly neccessary */
PTR_LI t0, INDEX_BASE
- cache_loop t0, t1, t8, INDEX_STORE_TAG_I
+ cache_loop t0, t1, R_IC_LINE, INDEX_STORE_TAG_I
#endif
+ /* Enable use of the I-cache by setting Config.K0 */
+ sync
+ mfc0 t0, CP0_CONFIG
+ li t1, CONFIG_SYS_MIPS_CACHE_MODE
+#if __mips_isa_rev >= 2
+ ins t0, t1, 0, 3
+#else
+ ori t0, t0, CONF_CM_CMASK
+ xori t0, t0, CONF_CM_CMASK
+ or t0, t0, t1
+#endif
+ mtc0 t0, CP0_CONFIG
+
/*
* then initialize D-cache.
*/
-1: blez t3, 3f
+1: blez R_DC_SIZE, 3f
PTR_LI t0, INDEX_BASE
- PTR_ADDU t1, t0, t3
+ PTR_ADDU t1, t0, R_DC_SIZE
/* clear all tags */
- cache_loop t0, t1, t9, INDEX_STORE_TAG_D
+ cache_loop t0, t1, R_DC_LINE, INDEX_STORE_TAG_D
#ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* load from each line (in cached space) */
PTR_LI t0, INDEX_BASE
2: LONG_L zero, 0(t0)
- PTR_ADDU t0, t9
+ PTR_ADDU t0, R_DC_LINE
bne t0, t1, 2b
/* clear all tags */
PTR_LI t0, INDEX_BASE
- cache_loop t0, t1, t9, INDEX_STORE_TAG_D
+ cache_loop t0, t1, R_DC_LINE, INDEX_STORE_TAG_D
+#endif
+3:
+
+#ifdef CONFIG_MIPS_L2_CACHE
+ /* If the L2 isn't bypassed then we're done */
+ beqz R_L2_BYPASSED, return
+
+ /* The L2 is bypassed - go initialise it */
+ b l2_init
+
+l2_unbypass:
+# if __mips_isa_rev >= 6
+ beqz R_L2_L2C, 1f
+
+ li t0, CKSEG1ADDR(CONFIG_MIPS_CM_BASE)
+ lw t1, GCR_L2_CONFIG(t0)
+ xor t1, t1, GCR_L2_CONFIG_BYPASS
+ sw t1, GCR_L2_CONFIG(t0)
+ sync
+ ehb
+ b 2f
+# endif
+1: mfc0 t0, CP0_CONFIG, 2
+ xor t0, t0, MIPS_CONF2_L2B
+ mtc0 t0, CP0_CONFIG, 2
+ ehb
+
+2:
+# ifdef CONFIG_MIPS_CM
+ /* Config3 must exist for a CM to be present */
+ mfc0 t0, CP0_CONFIG, 1
+ bgez t0, 2f
+ mfc0 t0, CP0_CONFIG, 2
+ bgez t0, 2f
+
+ /* Check Config3.CMGCR to determine CM presence */
+ mfc0 t0, CP0_CONFIG, 3
+ and t0, t0, MIPS_CONF3_CMGCR
+ beqz t0, 2f
+
+ /* Change Config.K0 to a coherent CCA */
+ mfc0 t0, CP0_CONFIG
+ li t1, CONF_CM_CACHABLE_COW
+#if __mips_isa_rev >= 2
+ ins t0, t1, 0, 3
+#else
+ ori t0, t0, CONF_CM_CMASK
+ xori t0, t0, CONF_CM_CMASK
+ or t0, t0, t1
+#endif
+ mtc0 t0, CP0_CONFIG
+
+ /*
+ * Join the coherent domain such that the caches of this core are kept
+ * coherent with those of other cores.
+ */
+ PTR_LI t0, CKSEG1ADDR(CONFIG_MIPS_CM_BASE)
+ lw t1, GCR_REV(t0)
+ li t2, GCR_REV_CM3
+ li t3, GCR_Cx_COHERENCE_EN
+ bge t1, t2, 1f
+ li t3, GCR_Cx_COHERENCE_DOM_EN
+1: sw t3, GCR_Cx_COHERENCE(t0)
+ ehb
+2:
+# endif
#endif
-3: jr ra
+return:
+ /* Ensure all cache operations complete before returning */
+ sync
+ jr ra
END(mips_cache_reset)
/*
diff --git a/arch/mips/mach-ath79/cpu.c b/arch/mips/mach-ath79/cpu.c
index 5756a06..4ef5092 100644
--- a/arch/mips/mach-ath79/cpu.c
+++ b/arch/mips/mach-ath79/cpu.c
@@ -46,7 +46,7 @@
{ATH79_SOC_QCA9561, "9561", REV_ID_MAJOR_QCA9561, 0},
};
-int arch_cpu_init(void)
+int mach_cpu_init(void)
{
void __iomem *base;
enum ath79_soc_type soc = ATH79_SOC_UNKNOWN;
diff --git a/board/imgtec/boston/Kconfig b/board/imgtec/boston/Kconfig
new file mode 100644
index 0000000..ab76a3c
--- /dev/null
+++ b/board/imgtec/boston/Kconfig
@@ -0,0 +1,16 @@
+if TARGET_BOSTON
+
+config SYS_BOARD
+ default "boston"
+
+config SYS_VENDOR
+ default "imgtec"
+
+config SYS_CONFIG_NAME
+ default "boston"
+
+config SYS_TEXT_BASE
+ default 0x9fc00000 if 32BIT
+ default 0xffffffff9fc00000 if 64BIT
+
+endif
diff --git a/board/imgtec/boston/MAINTAINERS b/board/imgtec/boston/MAINTAINERS
new file mode 100644
index 0000000..30dd481
--- /dev/null
+++ b/board/imgtec/boston/MAINTAINERS
@@ -0,0 +1,6 @@
+BOSTON BOARD
+M: Paul Burton <paul.burton@imgtec.com>
+S: Maintained
+F: board/imgtec/boston/
+F: include/configs/boston.h
+F: configs/boston_defconfig
diff --git a/board/imgtec/boston/Makefile b/board/imgtec/boston/Makefile
new file mode 100644
index 0000000..deda457
--- /dev/null
+++ b/board/imgtec/boston/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y += checkboard.o
+obj-y += ddr.o
+obj-y += lowlevel_init.o
diff --git a/board/imgtec/boston/boston-lcd.h b/board/imgtec/boston/boston-lcd.h
new file mode 100644
index 0000000..9f5c1b9
--- /dev/null
+++ b/board/imgtec/boston/boston-lcd.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __BOARD_BOSTON_LCD_H__
+#define __BOARD_BOSTON_LCD_H__
+
+/**
+ * lowlevel_display() - Display a message on Boston's LCD
+ * @msg: The string to display
+ *
+ * Display the string @msg on the 7 character LCD display of the Boston board.
+ * This is typically used for debug or to present some form of status
+ * indication to the user, allowing faults to be identified when things go
+ * wrong early enough that the UART isn't up.
+ */
+void lowlevel_display(const char msg[static 8]);
+
+#endif /* __BOARD_BOSTON_LCD_H__ */
diff --git a/board/imgtec/boston/boston-regs.h b/board/imgtec/boston/boston-regs.h
new file mode 100644
index 0000000..b9dfbb4
--- /dev/null
+++ b/board/imgtec/boston/boston-regs.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __BOARD_BOSTON_REGS_H__
+#define __BOARD_BOSTON_REGS_H__
+
+#include <asm/addrspace.h>
+
+#define BOSTON_PLAT_BASE CKSEG1ADDR(0x17ffd000)
+#define BOSTON_LCD_BASE CKSEG1ADDR(0x17fff000)
+
+/*
+ * Platform Register Definitions
+ */
+#define BOSTON_PLAT_CORE_CL (BOSTON_PLAT_BASE + 0x04)
+
+#define BOSTON_PLAT_DDR3STAT (BOSTON_PLAT_BASE + 0x14)
+# define BOSTON_PLAT_DDR3STAT_CALIB (1 << 2)
+
+#define BOSTON_PLAT_DDRCONF0 (BOSTON_PLAT_BASE + 0x38)
+# define BOSTON_PLAT_DDRCONF0_SIZE (0xf << 0)
+
+#endif /* __BOARD_BOSTON_REGS_H__ */
diff --git a/board/imgtec/boston/checkboard.c b/board/imgtec/boston/checkboard.c
new file mode 100644
index 0000000..93eae7f
--- /dev/null
+++ b/board/imgtec/boston/checkboard.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+
+#include "boston-lcd.h"
+#include "boston-regs.h"
+
+int checkboard(void)
+{
+ u32 changelist;
+
+ lowlevel_display("U-boot ");
+
+ printf("Board: MIPS Boston\n");
+
+ printf("CPU: 0x%08x", read_c0_prid());
+ changelist = __raw_readl((uint32_t *)BOSTON_PLAT_CORE_CL);
+ if (changelist > 1)
+ printf(" cl%x", changelist);
+ putc('\n');
+
+ return 0;
+}
diff --git a/board/imgtec/boston/ddr.c b/board/imgtec/boston/ddr.c
new file mode 100644
index 0000000..ceffef6
--- /dev/null
+++ b/board/imgtec/boston/ddr.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+
+#include "boston-regs.h"
+
+phys_size_t initdram(int board_type)
+{
+ u32 ddrconf0 = __raw_readl((uint32_t *)BOSTON_PLAT_DDRCONF0);
+
+ return (phys_size_t)(ddrconf0 & BOSTON_PLAT_DDRCONF0_SIZE) << 30;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (gd->ram_top < CONFIG_SYS_SDRAM_BASE) {
+ /* 2GB wrapped around to 0 */
+ return CKSEG0ADDR(256 << 20);
+ }
+
+ return min_t(unsigned long, gd->ram_top, CKSEG0ADDR(256 << 20));
+}
diff --git a/board/imgtec/boston/lowlevel_init.S b/board/imgtec/boston/lowlevel_init.S
new file mode 100644
index 0000000..0c01aa9
--- /dev/null
+++ b/board/imgtec/boston/lowlevel_init.S
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+
+#include "boston-regs.h"
+
+.data
+
+msg_ddr_cal: .ascii "DDR Cal "
+msg_ddr_ok: .ascii "DDR OK "
+
+.text
+
+LEAF(lowlevel_init)
+ move s0, ra
+
+ PTR_LA a0, msg_ddr_cal
+ bal lowlevel_display
+
+ PTR_LI t0, BOSTON_PLAT_DDR3STAT
+1: lw t1, 0(t0)
+ andi t1, t1, BOSTON_PLAT_DDR3STAT_CALIB
+ beqz t1, 1b
+
+ PTR_LA a0, msg_ddr_ok
+ bal lowlevel_display
+
+ move v0, zero
+ jr s0
+ END(lowlevel_init)
+
+LEAF(lowlevel_display)
+ .set push
+ .set noat
+ PTR_LI AT, BOSTON_LCD_BASE
+#ifdef CONFIG_64BIT
+ ld k1, 0(a0)
+ sd k1, 0(AT)
+#else
+ lw k1, 0(a0)
+ sw k1, 0(AT)
+ lw k1, 4(a0)
+ sw k1, 4(AT)
+#endif
+ .set pop
+1: jr ra
+ END(lowlevel_display)
diff --git a/board/imgtec/malta/lowlevel_init.S b/board/imgtec/malta/lowlevel_init.S
index 3d48cdc..6df4d9f 100644
--- a/board/imgtec/malta/lowlevel_init.S
+++ b/board/imgtec/malta/lowlevel_init.S
@@ -28,12 +28,6 @@
.globl lowlevel_init
lowlevel_init:
- /* disable any L2 cache for now */
- sync
- mfc0 t0, CP0_CONFIG, 2
- ori t0, t0, 0x1 << 12
- mtc0 t0, CP0_CONFIG, 2
-
/* detect the core card */
PTR_LI t0, CKSEG1ADDR(MALTA_REVISION)
lw t0, 0(t0)
diff --git a/board/imgtec/xilfpga/Kconfig b/board/imgtec/xilfpga/Kconfig
new file mode 100644
index 0000000..b078278
--- /dev/null
+++ b/board/imgtec/xilfpga/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_XILFPGA
+
+config SYS_BOARD
+ default "xilfpga"
+
+config SYS_VENDOR
+ default "imgtec"
+
+config SYS_CONFIG_NAME
+ default "imgtec_xilfpga"
+
+config SYS_TEXT_BASE
+ default 0x80C00000
+
+endif
diff --git a/board/imgtec/xilfpga/MAINTAINERS b/board/imgtec/xilfpga/MAINTAINERS
new file mode 100644
index 0000000..aa04532
--- /dev/null
+++ b/board/imgtec/xilfpga/MAINTAINERS
@@ -0,0 +1,6 @@
+XILFPGA BOARD
+M: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+S: Maintained
+F: board/imgtec/xilfpga
+F: include/configs/xilfpga.h
+F: configs/imgtec_xilfpga_defconfig
diff --git a/board/imgtec/xilfpga/Makefile b/board/imgtec/xilfpga/Makefile
new file mode 100644
index 0000000..9aaf9ce
--- /dev/null
+++ b/board/imgtec/xilfpga/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016, Imagination Technologies Ltd.
+# Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+obj-y := xilfpga.o
diff --git a/board/imgtec/xilfpga/README b/board/imgtec/xilfpga/README
new file mode 100644
index 0000000..ac19d48
--- /dev/null
+++ b/board/imgtec/xilfpga/README
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel, Zubair.Kakakhel@imgtec.com
+ */
+
+MIPSfpga
+=======================================
+
+MIPSfpga is an FPGA based development platform by Imagination Technologies
+As we are dealing with a MIPS core instantiated on an FPGA, specifications
+are fluid and can be varied in RTL.
+
+The example project provided by IMGTEC runs on the Nexys4DDR board by
+Digilent powered by the ARTIX-7 FPGA by Xilinx. Relevant details about
+the example project and the Nexys4DDR board:
+
+- microAptiv UP core m14Kc
+- 50MHz clock speed
+- 128Mbyte DDR RAM at 0x0000_0000
+- 8Kbyte RAM at 0x1000_0000
+- axi_intc at 0x1020_0000
+- axi_uart16550 at 0x1040_0000
+- axi_gpio at 0x1060_0000
+- axi_i2c at 0x10A0_0000
+- custom_gpio at 0x10C0_0000
+- axi_ethernetlite at 0x10E0_0000
+- 8Kbyte BootRAM at 0x1FC0_0000
+- 16Mbyte QPI at 0x1D00_0000
+
+Boot protocol:
+--------------
+
+The BootRAM is a writeable "RAM" in FPGA at 0x1FC0_0000.
+This is for easy reprogrammibility via JTAG.
+
+DDR initialization is already handled by a HW IP block.
+
+When the example project bitstream is loaded, the cpu_reset button
+needs to be pressed.
+
+The bootram initializes the cache and axi_uart
+Then checks if there is anything non 0xffff_ffff at location 0x1D40_0000
+
+If there is, then that is considered as u-boot. u-boot is copied from
+0x1D40_0000 to memory and the bootram jumps into u-boot code.
+
+At this point, the board is ready to load the Linux kernel + buildroot initramfs
+
+This can be done in multiple ways:
+
+1- JTAG load the binary and jump into it.
+2- Load kernel stored in the QSPI flash at 0x1D80_0000
+3- Load uImage via tftp. Ethernet works in u-boot.
+ e.g. env set server ip 192.168.154.45; dhcp uImage; bootm
diff --git a/board/imgtec/xilfpga/xilfpga.c b/board/imgtec/xilfpga/xilfpga.c
new file mode 100644
index 0000000..77a1952
--- /dev/null
+++ b/board/imgtec/xilfpga/xilfpga.c
@@ -0,0 +1,20 @@
+/*
+ * Imagination Technologies MIPSfpga platform code
+ *
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#include <common.h>
+
+/* initialize the DDR Controller and PHY */
+phys_size_t initdram(int board_type)
+{
+ /* MIG IP block is smart and doesn't need SW
+ * to do any init */
+ return CONFIG_SYS_SDRAM_SIZE; /* in bytes */
+}
diff --git a/common/board_f.c b/common/board_f.c
index da381db..9ef998f 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -290,6 +290,11 @@
return 0;
}
+__weak int mach_cpu_init(void)
+{
+ return 0;
+}
+
#ifdef CONFIG_SANDBOX
static int setup_ram_buf(void)
{
@@ -860,6 +865,7 @@
x86_fsp_init,
#endif
arch_cpu_init, /* basic arch cpu dependent setup */
+ mach_cpu_init, /* SoC/machine dependent CPU setup */
initf_dm,
arch_cpu_init_dm,
mark_bootstage, /* need timer, go after init dm */
diff --git a/common/image-fdt.c b/common/image-fdt.c
index d6ee225..3d23608 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -285,7 +285,7 @@
fdt_noffset = fit_get_node_from_config(images,
FIT_FDT_PROP,
fdt_addr);
- if (fdt_noffset == -ENOLINK)
+ if (fdt_noffset == -ENOENT)
return 0;
else if (fdt_noffset < 0)
return 1;
diff --git a/common/image-fit.c b/common/image-fit.c
index 9ce68f1..1b0234a 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -1560,7 +1560,7 @@
cfg_noffset = fit_conf_get_node(fit_hdr, images->fit_uname_cfg);
if (cfg_noffset < 0) {
debug("* %s: no such config\n", prop_name);
- return -ENOENT;
+ return -EINVAL;
}
noffset = fit_conf_get_prop_node(fit_hdr, cfg_noffset, prop_name);
diff --git a/common/image.c b/common/image.c
index 7ad04ca..c8d9bc8 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1078,7 +1078,7 @@
rd_addr = map_to_sysmem(images->fit_hdr_os);
rd_noffset = fit_get_node_from_config(images,
FIT_RAMDISK_PROP, rd_addr);
- if (rd_noffset == -ENOLINK)
+ if (rd_noffset == -ENOENT)
return 0;
else if (rd_noffset < 0)
return 1;
diff --git a/configs/boston32r2_defconfig b/configs/boston32r2_defconfig
new file mode 100644
index 0000000..ca66248
--- /dev/null
+++ b/configs/boston32r2_defconfig
@@ -0,0 +1,41 @@
+CONFIG_MIPS=y
+CONFIG_TARGET_BOSTON=y
+CONFIG_SYS_TEXT_BASE=0x9fc00000
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="boston # "
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_PCH_GBE=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_XILINX=y
+CONFIG_SYS_NS16550=y
+CONFIG_LZ4=y
diff --git a/configs/boston32r2el_defconfig b/configs/boston32r2el_defconfig
new file mode 100644
index 0000000..67f54bf
--- /dev/null
+++ b/configs/boston32r2el_defconfig
@@ -0,0 +1,42 @@
+CONFIG_MIPS=y
+CONFIG_TARGET_BOSTON=y
+CONFIG_SYS_TEXT_BASE=0x9fc00000
+CONFIG_SYS_LITTLE_ENDIAN=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="boston # "
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_PCH_GBE=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_XILINX=y
+CONFIG_SYS_NS16550=y
+CONFIG_LZ4=y
diff --git a/configs/boston64r2_defconfig b/configs/boston64r2_defconfig
new file mode 100644
index 0000000..1245d1b
--- /dev/null
+++ b/configs/boston64r2_defconfig
@@ -0,0 +1,41 @@
+CONFIG_MIPS=y
+CONFIG_TARGET_BOSTON=y
+CONFIG_CPU_MIPS64_R2=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="boston # "
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_PCH_GBE=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_XILINX=y
+CONFIG_SYS_NS16550=y
+CONFIG_LZ4=y
diff --git a/configs/boston64r2el_defconfig b/configs/boston64r2el_defconfig
new file mode 100644
index 0000000..9b5fa5a
--- /dev/null
+++ b/configs/boston64r2el_defconfig
@@ -0,0 +1,42 @@
+CONFIG_MIPS=y
+CONFIG_TARGET_BOSTON=y
+CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS64_R2=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="boston # "
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_CFI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_PCH_GBE=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_XILINX=y
+CONFIG_SYS_NS16550=y
+CONFIG_LZ4=y
diff --git a/configs/imgtec_xilfpga_defconfig b/configs/imgtec_xilfpga_defconfig
new file mode 100644
index 0000000..63f03cd
--- /dev/null
+++ b/configs/imgtec_xilfpga_defconfig
@@ -0,0 +1,25 @@
+CONFIG_MIPS=y
+CONFIG_SYS_MALLOC_F_LEN=0x600
+CONFIG_TARGET_XILFPGA=y
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="nexys4ddr"
+CONFIG_BOOTDELAY=5
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="MIPSfpga # "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_SAVEENV is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_CLK=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_CMD_DHRYSTONE=y
diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig
index af6dc31..e496afe 100644
--- a/configs/omap4_panda_defconfig
+++ b/configs/omap4_panda_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP44XX=y
+# CONFIG_SPL_EXT_SUPPORT is not set
# CONFIG_SPL_I2C_SUPPORT is not set
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_OMAP4_PANDA=y
diff --git a/doc/README.boston b/doc/README.boston
new file mode 100644
index 0000000..38f6710
--- /dev/null
+++ b/doc/README.boston
@@ -0,0 +1,58 @@
+MIPS Boston Development Board
+
+---------
+ About
+---------
+
+The MIPS Boston development board is built around an FPGA & 3 PCIe controllers,
+one of which is connected to an Intel EG20T Platform Controller Hub which
+provides most connectivity to the board. It is used during the development &
+testing of both new CPUs and the software support for them. It is essentially
+the successor of the older MIPS Malta board.
+
+--------
+ QEMU
+--------
+
+U-Boot can be run on a currently out-of-tree branch of QEMU with support for
+the Boston board added. This QEMU code can currently be found in the "boston"
+branch of git://git.linux-mips.org/pub/scm/paul/qemu.git and used like so:
+
+ $ git clone git://git.linux-mips.org/pub/scm/paul/qemu.git -b boston
+ $ cd qemu
+ $ ./configure --target-list=mips64el-softmmu
+ $ make
+ $ ./mips64el-softmmu/qemu-system-mips64el -M boston -m 2G \
+ -bios u-boot.bin -serial stdio
+
+Please note that QEMU will default to emulating the I6400 CPU which implements
+the MIPS64r6 ISA, and at the time of writing doesn't implement any earlier CPUs
+with support for the CPS features the Boston board relies upon. You will
+therefore need to configure U-Boot to build for MIPSr6 in order to obtain a
+binary that will work in QEMU.
+
+-------------
+ Toolchain
+-------------
+
+If building for MIPSr6 then you will need a toolchain including GCC 5.x or
+newer, or the Codescape toolchain available for download from Imagination
+Technologies:
+
+ http://codescape-mips-sdk.imgtec.com/components/toolchain/2015.06-05/
+
+The "IMG GNU Linux Toolchain" is capable of building for all current MIPS ISAs,
+architecture revisions & both endiannesses.
+
+--------
+ TODO
+--------
+
+ - AHCI support
+ - CPU driver
+ - Exception handling (+UHI?)
+ - Flash support
+ - IOCU support
+ - L2 cache support
+ - More general LCD display driver
+ - Multi-arch-variant multi-endian fat binary
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 8f3b96a..c05ce2a 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -20,6 +20,14 @@
setting up clocks within SPL, and allows the same drivers to be
used as U-Boot proper.
+config CLK_BOSTON
+ def_bool y if TARGET_BOSTON
+ depends on CLK
+ select REGMAP
+ select SYSCON
+ help
+ Enable this to support the clocks
+
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/uniphier/Kconfig"
source "drivers/clk/exynos/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 778d748..40a5e8c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
obj-$(CONFIG_CLK_EXYNOS) += exynos/
obj-$(CONFIG_CLK_AT91) += at91/
+obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
diff --git a/drivers/clk/clk_boston.c b/drivers/clk/clk_boston.c
new file mode 100644
index 0000000..78f1b75
--- /dev/null
+++ b/drivers/clk/clk_boston.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dt-bindings/clock/boston-clock.h>
+#include <regmap.h>
+#include <syscon.h>
+
+struct clk_boston {
+ struct regmap *regmap;
+};
+
+#define BOSTON_PLAT_MMCMDIV 0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV (0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT (0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL (0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV (0xff << 24)
+
+static uint32_t ext_field(uint32_t val, uint32_t mask)
+{
+ return (val & mask) >> (ffs(mask) - 1);
+}
+
+static ulong clk_boston_get_rate(struct clk *clk)
+{
+ struct clk_boston *state = dev_get_platdata(clk->dev);
+ uint32_t in_rate, mul, div;
+ uint mmcmdiv;
+ int err;
+
+ err = regmap_read(state->regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+ if (err)
+ return 0;
+
+ in_rate = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT);
+ mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+ switch (clk->id) {
+ case BOSTON_CLK_SYS:
+ div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+ break;
+ case BOSTON_CLK_CPU:
+ div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+ break;
+ default:
+ return 0;
+ }
+
+ return (in_rate * mul * 1000000) / div;
+}
+
+const struct clk_ops clk_boston_ops = {
+ .get_rate = clk_boston_get_rate,
+};
+
+static int clk_boston_ofdata_to_platdata(struct udevice *dev)
+{
+ struct clk_boston *state = dev_get_platdata(dev);
+ struct udevice *syscon;
+ int err;
+
+ err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
+ "regmap", &syscon);
+ if (err) {
+ error("unable to find syscon device\n");
+ return err;
+ }
+
+ state->regmap = syscon_get_regmap(syscon);
+ if (!state->regmap) {
+ error("unable to find regmap\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id clk_boston_match[] = {
+ {
+ .compatible = "img,boston-clock",
+ },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(clk_boston) = {
+ .name = "boston_clock",
+ .id = UCLASS_CLK,
+ .of_match = clk_boston_match,
+ .ofdata_to_platdata = clk_boston_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct clk_boston),
+ .ops = &clk_boston_ops,
+};
diff --git a/drivers/core/lists.c b/drivers/core/lists.c
index 6a634e6..23b6ba7 100644
--- a/drivers/core/lists.c
+++ b/drivers/core/lists.c
@@ -101,36 +101,24 @@
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
/**
- * driver_check_compatible() - Check if a driver is compatible with this node
+ * driver_check_compatible() - Check if a driver matches a compatible string
*
- * @param blob: Device tree pointer
- * @param offset: Offset of node in device tree
* @param of_match: List of compatible strings to match
* @param of_idp: Returns the match that was found
- * @return 0 if there is a match, -ENOENT if no match, -ENODEV if the node
- * does not have a compatible string, other error <0 if there is a device
- * tree error
+ * @param compat: The compatible string to search for
+ * @return 0 if there is a match, -ENOENT if no match
*/
-static int driver_check_compatible(const void *blob, int offset,
- const struct udevice_id *of_match,
- const struct udevice_id **of_idp)
+static int driver_check_compatible(const struct udevice_id *of_match,
+ const struct udevice_id **of_idp,
+ const char *compat)
{
- int ret;
-
- *of_idp = NULL;
if (!of_match)
return -ENOENT;
while (of_match->compatible) {
- ret = fdt_node_check_compatible(blob, offset,
- of_match->compatible);
- if (!ret) {
+ if (!strcmp(of_match->compatible, compat)) {
*of_idp = of_match;
return 0;
- } else if (ret == -FDT_ERR_NOTFOUND) {
- return -ENODEV;
- } else if (ret < 0) {
- return -EINVAL;
}
of_match++;
}
@@ -147,28 +135,46 @@
struct driver *entry;
struct udevice *dev;
bool found = false;
- const char *name;
+ const char *name, *compat_list, *compat;
+ int compat_length, i;
int result = 0;
int ret = 0;
- dm_dbg("bind node %s\n", fdt_get_name(blob, offset, NULL));
+ name = fdt_get_name(blob, offset, NULL);
+ dm_dbg("bind node %s\n", name);
if (devp)
*devp = NULL;
- for (entry = driver; entry != driver + n_ents; entry++) {
- ret = driver_check_compatible(blob, offset, entry->of_match,
- &id);
- name = fdt_get_name(blob, offset, NULL);
- if (ret == -ENOENT) {
- continue;
- } else if (ret == -ENODEV) {
+
+ compat_list = fdt_getprop(blob, offset, "compatible", &compat_length);
+ if (!compat_list) {
+ if (compat_length == -FDT_ERR_NOTFOUND) {
dm_dbg("Device '%s' has no compatible string\n", name);
- break;
- } else if (ret) {
- dm_warn("Device tree error at offset %d\n", offset);
- result = ret;
- break;
+ return 0;
}
+ dm_warn("Device tree error at offset %d\n", offset);
+ return compat_length;
+ }
+
+ /*
+ * Walk through the compatible string list, attempting to match each
+ * compatible string in order such that we match in order of priority
+ * from the first string to the last.
+ */
+ for (i = 0; i < compat_length; i += strlen(compat) + 1) {
+ compat = compat_list + i;
+ dm_dbg(" - attempt to match compatible string '%s'\n",
+ compat);
+
+ for (entry = driver; entry != driver + n_ents; entry++) {
+ ret = driver_check_compatible(entry->of_match, &id,
+ compat);
+ if (!ret)
+ break;
+ }
+ if (entry == driver + n_ents)
+ continue;
+
dm_dbg(" - found match at '%s'\n", entry->name);
ret = device_bind_with_driver_data(parent, entry, name,
id->data, offset, &dev);
@@ -188,10 +194,8 @@
break;
}
- if (!found && !result && ret != -ENODEV) {
- dm_dbg("No match for node '%s'\n",
- fdt_get_name(blob, offset, NULL));
- }
+ if (!found && !result && ret != -ENODEV)
+ dm_dbg("No match for node '%s'\n", name);
return result;
}
diff --git a/drivers/core/regmap.c b/drivers/core/regmap.c
index 0299ff0..c68bcba 100644
--- a/drivers/core/regmap.c
+++ b/drivers/core/regmap.c
@@ -13,6 +13,8 @@
#include <mapmem.h>
#include <regmap.h>
+#include <asm/io.h>
+
DECLARE_GLOBAL_DATA_PTR;
static struct regmap *regmap_alloc_count(int count)
@@ -117,3 +119,21 @@
return 0;
}
+
+int regmap_read(struct regmap *map, uint offset, uint *valp)
+{
+ uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE);
+
+ *valp = le32_to_cpu(readl(ptr));
+
+ return 0;
+}
+
+int regmap_write(struct regmap *map, uint offset, uint val)
+{
+ uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE);
+
+ writel(cpu_to_le32(val), ptr);
+
+ return 0;
+}
diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c
index 01bd968..2148469 100644
--- a/drivers/core/syscon-uclass.c
+++ b/drivers/core/syscon-uclass.c
@@ -95,3 +95,14 @@
.per_device_auto_alloc_size = sizeof(struct syscon_uc_info),
.pre_probe = syscon_pre_probe,
};
+
+static const struct udevice_id generic_syscon_ids[] = {
+ { .compatible = "syscon" },
+ { }
+};
+
+U_BOOT_DRIVER(generic_syscon) = {
+ .name = "syscon",
+ .id = UCLASS_SYSCON,
+ .of_match = generic_syscon_ids,
+};
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index afc674d..074f86c 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -120,9 +120,9 @@
if (host->fifo_mode && size) {
len = 0;
- if (data->flags == MMC_DATA_READ) {
- if ((dwmci_readl(host, DWMCI_RINTSTS) &
- DWMCI_INTMSK_RXDR)) {
+ if (data->flags == MMC_DATA_READ &&
+ (mask & DWMCI_INTMSK_RXDR)) {
+ while (size) {
len = dwmci_readl(host, DWMCI_STATUS);
len = (len >> DWMCI_FIFO_SHIFT) &
DWMCI_FIFO_MASK;
@@ -130,12 +130,13 @@
for (i = 0; i < len; i++)
*buf++ =
dwmci_readl(host, DWMCI_DATA);
- dwmci_writel(host, DWMCI_RINTSTS,
- DWMCI_INTMSK_RXDR);
+ size = size > len ? (size - len) : 0;
}
- } else {
- if ((dwmci_readl(host, DWMCI_RINTSTS) &
- DWMCI_INTMSK_TXDR)) {
+ dwmci_writel(host, DWMCI_RINTSTS,
+ DWMCI_INTMSK_RXDR);
+ } else if (data->flags == MMC_DATA_WRITE &&
+ (mask & DWMCI_INTMSK_TXDR)) {
+ while (size) {
len = dwmci_readl(host, DWMCI_STATUS);
len = fifo_depth - ((len >>
DWMCI_FIFO_SHIFT) &
@@ -144,11 +145,11 @@
for (i = 0; i < len; i++)
dwmci_writel(host, DWMCI_DATA,
*buf++);
- dwmci_writel(host, DWMCI_RINTSTS,
- DWMCI_INTMSK_TXDR);
+ size = size > len ? (size - len) : 0;
}
+ dwmci_writel(host, DWMCI_RINTSTS,
+ DWMCI_INTMSK_TXDR);
}
- size = size > len ? (size - len) : 0;
}
/* Data arrived correctly. */
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 43ea0bb..0312da9 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -21,6 +21,14 @@
#include <div64.h>
#include "mmc_private.h"
+static const unsigned int sd_au_size[] = {
+ 0, SZ_16K / 512, SZ_32K / 512,
+ SZ_64K / 512, SZ_128K / 512, SZ_256K / 512,
+ SZ_512K / 512, SZ_1M / 512, SZ_2M / 512,
+ SZ_4M / 512, SZ_8M / 512, (SZ_8M + SZ_4M) / 512,
+ SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512, SZ_64M / 512,
+};
+
#ifndef CONFIG_DM_MMC_OPS
__weak int board_mmc_getwp(struct mmc *mmc)
{
@@ -945,6 +953,62 @@
return 0;
}
+static int sd_read_ssr(struct mmc *mmc)
+{
+ int err, i;
+ struct mmc_cmd cmd;
+ ALLOC_CACHE_ALIGN_BUFFER(uint, ssr, 16);
+ struct mmc_data data;
+ int timeout = 3;
+ unsigned int au, eo, et, es;
+
+ cmd.cmdidx = MMC_CMD_APP_CMD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = mmc->rca << 16;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ return err;
+
+ cmd.cmdidx = SD_CMD_APP_SD_STATUS;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 0;
+
+retry_ssr:
+ data.dest = (char *)ssr;
+ data.blocksize = 64;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+
+ err = mmc_send_cmd(mmc, &cmd, &data);
+ if (err) {
+ if (timeout--)
+ goto retry_ssr;
+
+ return err;
+ }
+
+ for (i = 0; i < 16; i++)
+ ssr[i] = be32_to_cpu(ssr[i]);
+
+ au = (ssr[2] >> 12) & 0xF;
+ if ((au <= 9) || (mmc->version == SD_VERSION_3)) {
+ mmc->ssr.au = sd_au_size[au];
+ es = (ssr[3] >> 24) & 0xFF;
+ es |= (ssr[2] & 0xFF) << 8;
+ et = (ssr[3] >> 18) & 0x3F;
+ if (es && et) {
+ eo = (ssr[3] >> 16) & 0x3;
+ mmc->ssr.erase_timeout = (et * 1000) / es;
+ mmc->ssr.erase_offset = eo * 1000;
+ }
+ } else {
+ debug("Invalid Allocation Unit Size.\n");
+ }
+
+ return 0;
+}
+
/* frequency bases */
/* divided by 10 to be nice to platforms without floating point */
static const int fbase[] = {
@@ -1350,6 +1414,10 @@
mmc_set_bus_width(mmc, 4);
}
+ err = sd_read_ssr(mmc);
+ if (err)
+ return err;
+
if (mmc->card_caps & MMC_MODE_HS)
mmc->tran_speed = 50000000;
else
diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c
index 0f8b5c7..2289640 100644
--- a/drivers/mmc/mmc_write.c
+++ b/drivers/mmc/mmc_write.c
@@ -100,8 +100,13 @@
& ~(mmc->erase_grp_size - 1)) - 1);
while (blk < blkcnt) {
- blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
- mmc->erase_grp_size : (blkcnt - blk);
+ if (IS_SD(mmc) && mmc->ssr.au) {
+ blk_r = ((blkcnt - blk) > mmc->ssr.au) ?
+ mmc->ssr.au : (blkcnt - blk);
+ } else {
+ blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
+ mmc->erase_grp_size : (blkcnt - blk);
+ }
err = mmc_erase_t(mmc, start + blk, blk_r);
if (err)
break;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 7ddb549..b2bf5a0 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -121,13 +121,10 @@
* for card ready state.
* Every time when card is busy after timeout then (last) timeout value will be
* increased twice but only if it doesn't exceed global defined maximum.
- * Each function call will use last timeout value. Max timeout can be redefined
- * in board config file.
+ * Each function call will use last timeout value.
*/
-#ifndef CONFIG_SDHCI_CMD_MAX_TIMEOUT
-#define CONFIG_SDHCI_CMD_MAX_TIMEOUT 3200
-#endif
-#define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100
+#define SDHCI_CMD_MAX_TIMEOUT 3200
+#define SDHCI_CMD_DEFAULT_TIMEOUT 100
#define SDHCI_READ_STATUS_TIMEOUT 1000
#ifdef CONFIG_DM_MMC_OPS
@@ -151,7 +148,7 @@
unsigned start = get_timer(0);
/* Timeout unit - ms */
- static unsigned int cmd_timeout = CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT;
+ static unsigned int cmd_timeout = SDHCI_CMD_DEFAULT_TIMEOUT;
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
@@ -164,7 +161,7 @@
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (time >= cmd_timeout) {
printf("%s: MMC: %d busy ", __func__, mmc_dev);
- if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
+ if (2 * cmd_timeout <= SDHCI_CMD_MAX_TIMEOUT) {
cmd_timeout += cmd_timeout;
printf("timeout increasing to: %u ms.\n",
cmd_timeout);
@@ -297,7 +294,7 @@
static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
{
struct sdhci_host *host = mmc->priv;
- unsigned int div, clk, timeout, reg;
+ unsigned int div, clk = 0, timeout, reg;
/* Wait max 20 ms */
timeout = 200;
@@ -321,14 +318,36 @@
return 0;
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
- /* Version 3.00 divisors must be a multiple of 2. */
- if (mmc->cfg->f_max <= clock)
- div = 1;
- else {
- for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
- if ((mmc->cfg->f_max / div) <= clock)
+ /*
+ * Check if the Host Controller supports Programmable Clock
+ * Mode.
+ */
+ if (host->clk_mul) {
+ for (div = 1; div <= 1024; div++) {
+ if ((mmc->cfg->f_max * host->clk_mul / div)
+ <= clock)
break;
}
+
+ /*
+ * Set Programmable Clock Mode in the Clock
+ * Control register.
+ */
+ clk = SDHCI_PROG_CLOCK_MODE;
+ div--;
+ } else {
+ /* Version 3.00 divisors must be a multiple of 2. */
+ if (mmc->cfg->f_max <= clock) {
+ div = 1;
+ } else {
+ for (div = 2;
+ div < SDHCI_MAX_DIV_SPEC_300;
+ div += 2) {
+ if ((mmc->cfg->f_max / div) <= clock)
+ break;
+ }
+ }
+ div >>= 1;
}
} else {
/* Version 2.00 divisors must be a power of 2. */
@@ -336,13 +355,13 @@
if ((mmc->cfg->f_max / div) <= clock)
break;
}
+ div >>= 1;
}
- div >>= 1;
if (host->set_clock)
host->set_clock(host->index, div);
- clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
<< SDHCI_DIVIDER_HI_SHIFT;
clk |= SDHCI_CLOCK_INT_EN;
@@ -451,6 +470,8 @@
{
struct sdhci_host *host = mmc->priv;
+ sdhci_reset(host, SDHCI_RESET_ALL);
+
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
aligned_buffer = memalign(8, 512*1024);
if (!aligned_buffer) {
@@ -514,9 +535,17 @@
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
u32 max_clk, u32 min_clk)
{
- u32 caps;
+ u32 caps, caps_1;
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+
+#ifdef CONFIG_MMC_SDMA
+ if (!(caps & SDHCI_CAN_DO_SDMA)) {
+ printf("%s: Your controller doesn't support SDMA!!\n",
+ __func__);
+ return -EINVAL;
+ }
+#endif
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
cfg->name = host->name;
@@ -534,8 +563,11 @@
SDHCI_CLOCK_BASE_SHIFT;
cfg->f_max *= 1000000;
}
- if (cfg->f_max == 0)
+ if (cfg->f_max == 0) {
+ printf("%s: Hardware doesn't specify base clock frequency\n",
+ __func__);
return -EINVAL;
+ }
if (min_clk)
cfg->f_min = min_clk;
else {
@@ -552,6 +584,9 @@
if (caps & SDHCI_CAN_VDD_180)
cfg->voltages |= MMC_VDD_165_195;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
+ cfg->voltages |= host->voltages;
+
cfg->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
if (caps & SDHCI_CAN_DO_8BIT)
@@ -564,6 +599,14 @@
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+ /*
+ * In case of Host Controller v3.00, find out whether clock
+ * multiplier is supported.
+ */
+ caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+ host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
+ SDHCI_CLOCK_MUL_SHIFT;
+
return 0;
}
@@ -575,27 +618,11 @@
#else
int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
{
-#ifdef CONFIG_MMC_SDMA
- unsigned int caps;
+ int ret;
- caps = sdhci_readl(host, SDHCI_CAPABILITIES);
- if (!(caps & SDHCI_CAN_DO_SDMA)) {
- printf("%s: Your controller doesn't support SDMA!!\n",
- __func__);
- return -1;
- }
-#endif
-
- if (sdhci_setup_cfg(&host->cfg, host, max_clk, min_clk)) {
- printf("%s: Hardware doesn't specify base clock frequency\n",
- __func__);
- return -EINVAL;
- }
-
- if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
- host->cfg.voltages |= host->voltages;
-
- sdhci_reset(host, SDHCI_RESET_ALL);
+ ret = sdhci_setup_cfg(&host->cfg, host, max_clk, min_clk);
+ if (ret)
+ return ret;
host->mmc = mmc_create(&host->cfg, host);
if (host->mmc == NULL) {
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index be3ed73..302c005 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -175,7 +175,7 @@
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config XILINX_EMACLITE
- depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
+ depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c
index 137818b..d40fff0 100644
--- a/drivers/net/pch_gbe.c
+++ b/drivers/net/pch_gbe.c
@@ -118,14 +118,14 @@
memset(rx_desc, 0, sizeof(struct pch_gbe_rx_desc) * PCH_GBE_DESC_NUM);
for (i = 0; i < PCH_GBE_DESC_NUM; i++)
rx_desc->buffer_addr = dm_pci_phys_to_mem(priv->dev,
- (u32)(priv->rx_buff[i]));
+ (ulong)(priv->rx_buff[i]));
- writel(dm_pci_phys_to_mem(priv->dev, (u32)rx_desc),
+ writel(dm_pci_phys_to_mem(priv->dev, (ulong)rx_desc),
&mac_regs->rx_dsc_base);
writel(sizeof(struct pch_gbe_rx_desc) * (PCH_GBE_DESC_NUM - 1),
&mac_regs->rx_dsc_size);
- writel(dm_pci_phys_to_mem(priv->dev, (u32)(rx_desc + 1)),
+ writel(dm_pci_phys_to_mem(priv->dev, (ulong)(rx_desc + 1)),
&mac_regs->rx_dsc_sw_p);
}
@@ -137,11 +137,11 @@
memset(tx_desc, 0, sizeof(struct pch_gbe_tx_desc) * PCH_GBE_DESC_NUM);
- writel(dm_pci_phys_to_mem(priv->dev, (u32)tx_desc),
+ writel(dm_pci_phys_to_mem(priv->dev, (ulong)tx_desc),
&mac_regs->tx_dsc_base);
writel(sizeof(struct pch_gbe_tx_desc) * (PCH_GBE_DESC_NUM - 1),
&mac_regs->tx_dsc_size);
- writel(dm_pci_phys_to_mem(priv->dev, (u32)(tx_desc + 1)),
+ writel(dm_pci_phys_to_mem(priv->dev, (ulong)(tx_desc + 1)),
&mac_regs->tx_dsc_sw_p);
}
@@ -251,7 +251,7 @@
if (length < 64)
frame_ctrl |= PCH_GBE_TXD_CTRL_APAD;
- tx_desc->buffer_addr = dm_pci_phys_to_mem(priv->dev, (u32)packet);
+ tx_desc->buffer_addr = dm_pci_phys_to_mem(priv->dev, (ulong)packet);
tx_desc->length = length;
tx_desc->tx_words_eob = length + 3;
tx_desc->tx_frame_ctrl = frame_ctrl;
@@ -262,7 +262,7 @@
if (++priv->tx_idx >= PCH_GBE_DESC_NUM)
priv->tx_idx = 0;
- writel(dm_pci_phys_to_mem(priv->dev, (u32)(tx_head + priv->tx_idx)),
+ writel(dm_pci_phys_to_mem(priv->dev, (ulong)(tx_head + priv->tx_idx)),
&mac_regs->tx_dsc_sw_p);
start = get_timer(0);
@@ -283,7 +283,7 @@
struct pch_gbe_priv *priv = dev_get_priv(dev);
struct pch_gbe_regs *mac_regs = priv->mac_regs;
struct pch_gbe_rx_desc *rx_desc;
- u32 hw_desc, buffer_addr, length;
+ ulong hw_desc, buffer_addr, length;
rx_desc = &priv->rx_desc[priv->rx_idx];
@@ -291,7 +291,7 @@
hw_desc = readl(&mac_regs->rx_dsc_hw_p_hld);
/* Just return if not receiving any packet */
- if ((u32)rx_desc == hw_desc)
+ if ((ulong)rx_desc == hw_desc)
return -EAGAIN;
buffer_addr = dm_pci_mem_to_phys(priv->dev, rx_desc->buffer_addr);
@@ -315,7 +315,7 @@
if (++rx_swp >= PCH_GBE_DESC_NUM)
rx_swp = 0;
- writel(dm_pci_phys_to_mem(priv->dev, (u32)(rx_head + rx_swp)),
+ writel(dm_pci_phys_to_mem(priv->dev, (ulong)(rx_head + rx_swp)),
&mac_regs->rx_dsc_sw_p);
return 0;
@@ -421,7 +421,7 @@
{
struct pch_gbe_priv *priv;
struct eth_pdata *plat = dev_get_platdata(dev);
- u32 iobase;
+ void *iobase;
/*
* The priv structure contains the descriptors and frame buffers which
@@ -432,11 +432,9 @@
priv->dev = dev;
- dm_pci_read_config32(dev, PCI_BASE_ADDRESS_1, &iobase);
- iobase &= PCI_BASE_ADDRESS_MEM_MASK;
- iobase = dm_pci_mem_to_phys(dev, iobase);
+ iobase = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_1, PCI_REGION_MEM);
- plat->iobase = iobase;
+ plat->iobase = (ulong)iobase;
priv->mac_regs = (struct pch_gbe_regs *)iobase;
/* Read MAC address from SROM and initialize dev->enetaddr with it */
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 7b85aa0..d86e7a3 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -19,6 +19,7 @@
#include <fdtdec.h>
#include <asm-generic/errno.h>
#include <linux/kernel.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -154,7 +155,7 @@
unsigned long start = get_timer(0);
while (1) {
- val = readl(reg);
+ val = __raw_readl(reg);
if (!set)
val = ~val;
@@ -193,16 +194,17 @@
if (mdio_wait(regs))
return 1;
- u32 ctrl_reg = in_be32(®s->mdioctrl);
- out_be32(®s->mdioaddr, XEL_MDIOADDR_OP_MASK |
- ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
- out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ u32 ctrl_reg = __raw_readl(®s->mdioctrl);
+ __raw_writel(XEL_MDIOADDR_OP_MASK
+ | ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
+ | registernum), ®s->mdioaddr);
+ __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, ®s->mdioctrl);
if (mdio_wait(regs))
return 1;
/* Read data */
- *data = in_be32(®s->mdiord);
+ *data = __raw_readl(®s->mdiord);
return 0;
}
@@ -220,11 +222,12 @@
* Data register. Finally, set the Status bit in the MDIO Control
* register to start a MDIO write transaction.
*/
- u32 ctrl_reg = in_be32(®s->mdioctrl);
- out_be32(®s->mdioaddr, ~XEL_MDIOADDR_OP_MASK &
- ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
- out_be32(®s->mdiowr, data);
- out_be32(®s->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ u32 ctrl_reg = __raw_readl(®s->mdioctrl);
+ __raw_writel(~XEL_MDIOADDR_OP_MASK
+ & ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
+ | registernum), ®s->mdioaddr);
+ __raw_writel(data, ®s->mdiowr);
+ __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, ®s->mdioctrl);
if (mdio_wait(regs))
return 1;
@@ -327,27 +330,27 @@
* TX - TX_PING & TX_PONG initialization
*/
/* Restart PING TX */
- out_be32(®s->tx_ping_tsr, 0);
+ __raw_writel(0, ®s->tx_ping_tsr);
/* Copy MAC address */
xemaclite_alignedwrite(pdata->enetaddr, ®s->tx_ping,
ENET_ADDR_LENGTH);
/* Set the length */
- out_be32(®s->tx_ping_tplr, ENET_ADDR_LENGTH);
+ __raw_writel(ENET_ADDR_LENGTH, ®s->tx_ping_tplr);
/* Update the MAC address in the EMAC Lite */
- out_be32(®s->tx_ping_tsr, XEL_TSR_PROG_MAC_ADDR);
+ __raw_writel(XEL_TSR_PROG_MAC_ADDR, ®s->tx_ping_tsr);
/* Wait for EMAC Lite to finish with the MAC address update */
- while ((in_be32 (®s->tx_ping_tsr) &
+ while ((__raw_readl(®s->tx_ping_tsr) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
if (emaclite->txpp) {
/* The same operation with PONG TX */
- out_be32(®s->tx_pong_tsr, 0);
+ __raw_writel(0, ®s->tx_pong_tsr);
xemaclite_alignedwrite(pdata->enetaddr, ®s->tx_pong,
ENET_ADDR_LENGTH);
- out_be32(®s->tx_pong_tplr, ENET_ADDR_LENGTH);
- out_be32(®s->tx_pong_tsr, XEL_TSR_PROG_MAC_ADDR);
- while ((in_be32(®s->tx_pong_tsr) &
+ __raw_writel(ENET_ADDR_LENGTH, ®s->tx_pong_tplr);
+ __raw_writel(XEL_TSR_PROG_MAC_ADDR, ®s->tx_pong_tsr);
+ while ((__raw_readl(®s->tx_pong_tsr) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
}
@@ -356,13 +359,13 @@
* RX - RX_PING & RX_PONG initialization
*/
/* Write out the value to flush the RX buffer */
- out_be32(®s->rx_ping_rsr, XEL_RSR_RECV_IE_MASK);
+ __raw_writel(XEL_RSR_RECV_IE_MASK, ®s->rx_ping_rsr);
if (emaclite->rxpp)
- out_be32(®s->rx_pong_rsr, XEL_RSR_RECV_IE_MASK);
+ __raw_writel(XEL_RSR_RECV_IE_MASK, ®s->rx_pong_rsr);
- out_be32(®s->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);
- if (in_be32(®s->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
+ __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, ®s->mdioctrl);
+ if (__raw_readl(®s->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
if (!setup_phy(dev))
return -1;
@@ -379,9 +382,9 @@
* Read the other buffer register
* and determine if the other buffer is available
*/
- tmp = ~in_be32(®s->tx_ping_tsr);
+ tmp = ~__raw_readl(®s->tx_ping_tsr);
if (emaclite->txpp)
- tmp |= ~in_be32(®s->tx_pong_tsr);
+ tmp |= ~__raw_readl(®s->tx_pong_tsr);
return !(tmp & XEL_TSR_XMIT_BUSY_MASK);
}
@@ -405,40 +408,42 @@
if (!maxtry) {
printf("Error: Timeout waiting for ethernet TX buffer\n");
/* Restart PING TX */
- out_be32(®s->tx_ping_tsr, 0);
+ __raw_writel(0, ®s->tx_ping_tsr);
if (emaclite->txpp) {
- out_be32(®s->tx_pong_tsr, 0);
+ __raw_writel(0, ®s->tx_pong_tsr);
}
return -1;
}
/* Determine if the expected buffer address is empty */
- reg = in_be32(®s->tx_ping_tsr);
+ reg = __raw_readl(®s->tx_ping_tsr);
if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
debug("Send packet from tx_ping buffer\n");
/* Write the frame to the buffer */
xemaclite_alignedwrite(ptr, ®s->tx_ping, len);
- out_be32(®s->tx_ping_tplr, len &
- (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO));
- reg = in_be32(®s->tx_ping_tsr);
+ __raw_writel(len
+ & (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO),
+ ®s->tx_ping_tplr);
+ reg = __raw_readl(®s->tx_ping_tsr);
reg |= XEL_TSR_XMIT_BUSY_MASK;
- out_be32(®s->tx_ping_tsr, reg);
+ __raw_writel(reg, ®s->tx_ping_tsr);
return 0;
}
if (emaclite->txpp) {
/* Determine if the expected buffer address is empty */
- reg = in_be32(®s->tx_pong_tsr);
+ reg = __raw_readl(®s->tx_pong_tsr);
if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
debug("Send packet from tx_pong buffer\n");
/* Write the frame to the buffer */
xemaclite_alignedwrite(ptr, ®s->tx_pong, len);
- out_be32(®s->tx_pong_tplr, len &
+ __raw_writel(len &
(XEL_TPLR_LENGTH_MASK_HI |
- XEL_TPLR_LENGTH_MASK_LO));
- reg = in_be32(®s->tx_pong_tsr);
+ XEL_TPLR_LENGTH_MASK_LO),
+ ®s->tx_pong_tplr);
+ reg = __raw_readl(®s->tx_pong_tsr);
reg |= XEL_TSR_XMIT_BUSY_MASK;
- out_be32(®s->tx_pong_tsr, reg);
+ __raw_writel(reg, ®s->tx_pong_tsr);
return 0;
}
}
@@ -458,7 +463,7 @@
try_again:
if (!emaclite->use_rx_pong_buffer_next) {
- reg = in_be32(®s->rx_ping_rsr);
+ reg = __raw_readl(®s->rx_ping_rsr);
debug("Testing data at rx_ping\n");
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
debug("Data found in rx_ping buffer\n");
@@ -478,7 +483,7 @@
goto try_again;
}
} else {
- reg = in_be32(®s->rx_pong_rsr);
+ reg = __raw_readl(®s->rx_pong_rsr);
debug("Testing data at rx_pong\n");
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
debug("Data found in rx_pong buffer\n");
@@ -525,9 +530,9 @@
length - first_read);
/* Acknowledge the frame */
- reg = in_be32(ack);
+ reg = __raw_readl(ack);
reg &= ~XEL_RSR_RECV_DONE_MASK;
- out_be32(ack, reg);
+ __raw_writel(reg, ack);
debug("Packet receive from 0x%p, length %dB\n", addr, length);
*packetp = etherrxbuff;
@@ -595,7 +600,8 @@
int offset = 0;
pdata->iobase = (phys_addr_t)dev_get_addr(dev);
- emaclite->regs = (struct emaclite_regs *)pdata->iobase;
+ emaclite->regs = (struct emaclite_regs *)ioremap_nocache(pdata->iobase,
+ 0x10000);
emaclite->phyaddr = -1;
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 669e37b..9a7c187 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -39,4 +39,11 @@
with a total of 5 lanes. Some boards require this for Ethernet
support to work (e.g. beaver, jetson-tk1).
+config PCI_XILINX
+ bool "Xilinx AXI Bridge for PCI Express"
+ depends on DM_PCI
+ help
+ Enable support for the Xilinx AXI bridge for PCI express, an IP block
+ which can be used on some generations of Xilinx FPGAs.
+
endmenu
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f8be9bf..9583e91 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -31,3 +31,4 @@
obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
+obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 342b78c..3b00e6a 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -837,7 +837,7 @@
hose = bus->uclass_priv;
/* For bridges, use the top-level PCI controller */
- if (device_get_uclass_id(bus->parent) == UCLASS_ROOT) {
+ if (!device_is_on_pci_bus(bus)) {
hose->ctlr = bus;
ret = decode_regions(hose, gd->fdt_blob, bus->parent->of_offset,
bus->of_offset);
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
new file mode 100644
index 0000000..5216001
--- /dev/null
+++ b/drivers/pci/pcie_xilinx.c
@@ -0,0 +1,220 @@
+/*
+ * Xilinx AXI Bridge for PCI Express Driver
+ *
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pci.h>
+
+#include <asm/io.h>
+
+/**
+ * struct xilinx_pcie - Xilinx PCIe controller state
+ * @hose: The parent classes PCI controller state
+ * @cfg_base: The base address of memory mapped configuration space
+ */
+struct xilinx_pcie {
+ struct pci_controller hose;
+ void *cfg_base;
+};
+
+/* Register definitions */
+#define XILINX_PCIE_REG_PSCR 0x144
+#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11)
+
+/**
+ * pcie_xilinx_link_up() - Check whether the PCIe link is up
+ * @pcie: Pointer to the PCI controller state
+ *
+ * Checks whether the PCIe link for the given device is up or down.
+ *
+ * Return: true if the link is up, else false
+ */
+static bool pcie_xilinx_link_up(struct xilinx_pcie *pcie)
+{
+ uint32_t pscr = __raw_readl(pcie->cfg_base + XILINX_PCIE_REG_PSCR);
+
+ return pscr & XILINX_PCIE_REG_PSCR_LNKUP;
+}
+
+/**
+ * pcie_xilinx_config_address() - Calculate the address of a config access
+ * @pcie: Pointer to the PCI controller state
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @paddress: Pointer to the pointer to write the calculates address to
+ *
+ * Calculates the address that should be accessed to perform a PCIe
+ * configuration space access for a given device identified by the PCIe
+ * controller device @pcie and the bus, device & function numbers in @bdf. If
+ * access to the device is not valid then the function will return an error
+ * code. Otherwise the address to access will be written to the pointer pointed
+ * to by @paddress.
+ *
+ * Return: 0 on success, else -ENODEV
+ */
+static int pcie_xilinx_config_address(struct xilinx_pcie *pcie, pci_dev_t bdf,
+ uint offset, void **paddress)
+{
+ unsigned int bus = PCI_BUS(bdf);
+ unsigned int dev = PCI_DEV(bdf);
+ unsigned int func = PCI_FUNC(bdf);
+ void *addr;
+
+ if ((bus > 0) && !pcie_xilinx_link_up(pcie))
+ return -ENODEV;
+
+ /*
+ * Busses 0 (host-PCIe bridge) & 1 (its immediate child) are
+ * limited to a single device each.
+ */
+ if ((bus < 2) && (dev > 0))
+ return -ENODEV;
+
+ addr = pcie->cfg_base;
+ addr += bus << 20;
+ addr += dev << 15;
+ addr += func << 12;
+ addr += offset;
+ *paddress = addr;
+
+ return 0;
+}
+
+/**
+ * pcie_xilinx_read_config() - Read from configuration space
+ * @pcie: Pointer to the PCI controller state
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @valuep: A pointer at which to store the read value
+ * @size: Indicates the size of access to perform
+ *
+ * Read a value of size @size from offset @offset within the configuration
+ * space of the device identified by the bus, device & function numbers in @bdf
+ * on the PCI bus @bus.
+ *
+ * Return: 0 on success, else -ENODEV or -EINVAL
+ */
+static int pcie_xilinx_read_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct xilinx_pcie *pcie = dev_get_priv(bus);
+ void *address;
+ int err;
+
+ err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
+ if (err < 0) {
+ *valuep = pci_get_ff(size);
+ return 0;
+ }
+
+ switch (size) {
+ case PCI_SIZE_8:
+ *valuep = __raw_readb(address);
+ return 0;
+ case PCI_SIZE_16:
+ *valuep = __raw_readw(address);
+ return 0;
+ case PCI_SIZE_32:
+ *valuep = __raw_readl(address);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * pcie_xilinx_write_config() - Write to configuration space
+ * @pcie: Pointer to the PCI controller state
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @value: The value to write
+ * @size: Indicates the size of access to perform
+ *
+ * Write the value @value of size @size from offset @offset within the
+ * configuration space of the device identified by the bus, device & function
+ * numbers in @bdf on the PCI bus @bus.
+ *
+ * Return: 0 on success, else -ENODEV or -EINVAL
+ */
+static int pcie_xilinx_write_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct xilinx_pcie *pcie = dev_get_priv(bus);
+ void *address;
+ int err;
+
+ err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
+ if (err < 0)
+ return 0;
+
+ switch (size) {
+ case PCI_SIZE_8:
+ __raw_writeb(value, address);
+ return 0;
+ case PCI_SIZE_16:
+ __raw_writew(value, address);
+ return 0;
+ case PCI_SIZE_32:
+ __raw_writel(value, address);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * pcie_xilinx_ofdata_to_platdata() - Translate from DT to device state
+ * @dev: A pointer to the device being operated on
+ *
+ * Translate relevant data from the device tree pertaining to device @dev into
+ * state that the driver will later make use of. This state is stored in the
+ * device's private data structure.
+ *
+ * Return: 0 on success, else -EINVAL
+ */
+static int pcie_xilinx_ofdata_to_platdata(struct udevice *dev)
+{
+ struct xilinx_pcie *pcie = dev_get_priv(dev);
+ struct fdt_resource reg_res;
+ DECLARE_GLOBAL_DATA_PTR;
+ int err;
+
+ err = fdt_get_resource(gd->fdt_blob, dev->of_offset, "reg",
+ 0, ®_res);
+ if (err < 0) {
+ error("\"reg\" resource not found\n");
+ return err;
+ }
+
+ pcie->cfg_base = map_physmem(reg_res.start,
+ fdt_resource_size(®_res),
+ MAP_NOCACHE);
+
+ return 0;
+}
+
+static const struct dm_pci_ops pcie_xilinx_ops = {
+ .read_config = pcie_xilinx_read_config,
+ .write_config = pcie_xilinx_write_config,
+};
+
+static const struct udevice_id pcie_xilinx_ids[] = {
+ { .compatible = "xlnx,axi-pcie-host-1.00.a" },
+ { }
+};
+
+U_BOOT_DRIVER(pcie_xilinx) = {
+ .name = "pcie_xilinx",
+ .id = UCLASS_PCI,
+ .of_match = pcie_xilinx_ids,
+ .ops = &pcie_xilinx_ops,
+ .ofdata_to_platdata = pcie_xilinx_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct xilinx_pcie),
+};
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 88fca15..3f6ea4d 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -5,6 +5,7 @@
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
@@ -352,6 +353,8 @@
{
struct ns16550_platdata *plat = dev->platdata;
fdt_addr_t addr;
+ struct clk clk;
+ int err;
/* try Processor Local Bus device first */
addr = dev_get_addr(dev);
@@ -397,9 +400,21 @@
"reg-offset", 0);
plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
"reg-shift", 0);
- plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
- "clock-frequency",
- CONFIG_SYS_NS16550_CLK);
+
+ err = clk_get_by_index(dev, 0, &clk);
+ if (!err) {
+ err = clk_get_rate(&clk);
+ if (!IS_ERR_VALUE(err))
+ plat->clock = err;
+ } else if (err != -ENODEV && err != -ENOSYS) {
+ debug("ns16550 failed to get clock\n");
+ return err;
+ }
+
+ if (!plat->clock)
+ plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "clock-frequency",
+ CONFIG_SYS_NS16550_CLK);
if (!plat->clock) {
debug("ns16550 clock not defined\n");
return -EINVAL;
diff --git a/include/clk.h b/include/clk.h
index dc18b03..94c0037 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -10,6 +10,7 @@
#define _CLK_H_
#include <linux/types.h>
+#include <asm/errno.h>
/**
* A clock is a hardware signal that oscillates autonomously at a specific
@@ -59,7 +60,7 @@
unsigned long id;
};
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK)
struct phandle_2_cell;
int clk_get_by_index_platdata(struct udevice *dev, int index,
struct phandle_2_cell *cells, struct clk *clk);
diff --git a/include/configs/boston.h b/include/configs/boston.h
new file mode 100644
index 0000000..e958054
--- /dev/null
+++ b/include/configs/boston.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __CONFIGS_BOSTON_H__
+#define __CONFIGS_BOSTON_H__
+
+/*
+ * General board configuration
+ */
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*
+ * CPU
+ */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 30000000
+
+/*
+ * PCI
+ */
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+
+/*
+ * Memory map
+ */
+#ifdef CONFIG_64BIT
+# define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
+#else
+# define CONFIG_SYS_SDRAM_BASE 0x80000000
+#endif
+
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100000)
+
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x10000000)
+
+#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+
+/*
+ * Console
+ */
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Flash
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#ifdef CONFIG_64BIT
+# define CONFIG_ENV_ADDR \
+ (0xffffffffb8000000 + (128 << 20) - CONFIG_ENV_SIZE)
+#else
+# define CONFIG_ENV_ADDR \
+ (0xb8000000 + (128 << 20) - CONFIG_ENV_SIZE)
+#endif
+
+#endif /* __CONFIGS_BOSTON_H__ */
diff --git a/include/configs/imgtec_xilfpga.h b/include/configs/imgtec_xilfpga.h
new file mode 100644
index 0000000..0a7fe60
--- /dev/null
+++ b/include/configs/imgtec_xilfpga.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Imagination Technologies Ltd. MIPSfpga
+ */
+
+#ifndef __XILFPGA_CONFIG_H
+#define __XILFPGA_CONFIG_H
+
+/* BootROM + MIG is pretty smart. DDR and Cache initialized */
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/*--------------------------------------------
+ * CPU configuration
+ */
+/* CPU Timer rate */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 50000000
+
+/* Cache Configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+
+/*----------------------------------------------------------------------
+ * Memory Layout
+ */
+
+/* SDRAM Configuration (for final code, data, stack, heap) */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 Mbytes */
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_LOAD_ADDR 0x80500000 /* default load address */
+
+/*----------------------------------------------------------------------
+ * Commands
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+
+/*-------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*------------------------------------------------------------
+ * Console Configuration
+ */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
+#define CONFIG_BAUDRATE 115200
+
+/* -------------------------------------------------
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x4000
+
+/* ---------------------------------------------------------------------
+ * Board boot configuration
+ */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+#endif /* __XILFPGA_CONFIG_H */
diff --git a/include/dt-bindings/clock/boston-clock.h b/include/dt-bindings/clock/boston-clock.h
new file mode 100644
index 0000000..25f9cd2
--- /dev/null
+++ b/include/dt-bindings/clock/boston-clock.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+#define __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+
+#define BOSTON_CLK_SYS 0
+#define BOSTON_CLK_CPU 1
+
+#endif /* __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ */
diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h
new file mode 100644
index 0000000..cf35a57
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mips-gic.h
@@ -0,0 +1,9 @@
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define GIC_SHARED 0
+#define GIC_LOCAL 1
+
+#endif
diff --git a/include/mmc.h b/include/mmc.h
index aa6d5d1..e815eb3 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -11,6 +11,7 @@
#define _MMC_H_
#include <linux/list.h>
+#include <linux/sizes.h>
#include <linux/compiler.h>
#include <part.h>
@@ -102,6 +103,7 @@
#define SD_CMD_SWITCH_UHS18V 11
#define SD_CMD_APP_SET_BUS_WIDTH 6
+#define SD_CMD_APP_SD_STATUS 13
#define SD_CMD_ERASE_WR_BLK_START 32
#define SD_CMD_ERASE_WR_BLK_END 33
#define SD_CMD_APP_SEND_OP_COND 41
@@ -392,6 +394,12 @@
unsigned char part_type;
};
+struct sd_ssr {
+ unsigned int au; /* In sectors */
+ unsigned int erase_timeout; /* In milliseconds */
+ unsigned int erase_offset; /* In milliseconds */
+};
+
/*
* With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
* with mmc_get_mmc_dev().
@@ -426,6 +434,7 @@
uint write_bl_len;
uint erase_grp_size; /* in 512-byte sectors */
uint hc_wp_grp_size; /* in 512-byte sectors */
+ struct sd_ssr ssr; /* SD status register */
u64 capacity;
u64 capacity_user;
u64 capacity_boot;
diff --git a/include/sdhci.h b/include/sdhci.h
index 6844c73..144570f 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -97,6 +97,7 @@
#define SDHCI_DIV_MASK 0xFF
#define SDHCI_DIV_MASK_LEN 8
#define SDHCI_DIV_HI_MASK 0x300
+#define SDHCI_PROG_CLOCK_MODE 0x0020
#define SDHCI_CLOCK_CARD_EN 0x0004
#define SDHCI_CLOCK_INT_STABLE 0x0002
#define SDHCI_CLOCK_INT_EN 0x0001
@@ -242,6 +243,7 @@
unsigned int quirks;
unsigned int host_caps;
unsigned int version;
+ unsigned int clk_mul; /* Clock Multiplier value */
unsigned int clock;
struct mmc *mmc;
const struct sdhci_ops *ops;
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 4994fa8..5a7f79c 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -216,8 +216,19 @@
cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
+# If .u-boot.cfg.d is still present, then either:
+# a) The previous build used a Makefile that used if_changed rather than
+# if_changed_dep when building u-boot.cfg, and hence any later builds will
+# be unaware of the dependencies for u-boot.cfg. In this case, we must
+# delete u-boot.cfg to force it and .u-boot.cfg.cmd to be rebuilt the
+# correct way.
+# b) The previous build failed or was interrupted while building u-boot.cfg,
+# so deleting u-boot.cfg isn't going to cause any additional work.
+ifneq ($(wildcard $(obj)/.$(SPL_BIN).d),)
+ unused := $(shell rm -f $(obj)/$(SPL_BIN).cfg)
+endif
$(obj)/$(SPL_BIN).cfg: include/config.h FORCE
- $(call if_changed,cpp_cfg)
+ $(call if_changed_dep,cpp_cfg)
pythonpath = PYTHONPATH=tools
diff --git a/test/py/tests/test_vboot.py b/test/py/tests/test_vboot.py
index 021892b..6e62820 100644
--- a/test/py/tests/test_vboot.py
+++ b/test/py/tests/test_vboot.py
@@ -53,7 +53,7 @@
util.run_and_log(cons, 'dtc %s %s%s -O dtb '
'-o %s%s' % (dtc_args, datadir, dts, tmpdir, dtb))
- def run_bootm(sha_algo, test_type, expect_string):
+ def run_bootm(sha_algo, test_type, expect_string, boots):
"""Run a 'bootm' command U-Boot.
This always starts a fresh U-Boot instance since the device tree may
@@ -64,6 +64,8 @@
expect_string: A string which is expected in the output.
sha_algo: Either 'sha1' or 'sha256', to select the algorithm to
use.
+ boots: A boolean that is True if Linux should boot and False if
+ we are expected to not boot
"""
cons.restart_uboot()
with cons.log.section('Verified boot %s %s' % (sha_algo, test_type)):
@@ -72,6 +74,8 @@
'fdt addr 100',
'bootm 100'])
assert(expect_string in ''.join(output))
+ if boots:
+ assert('sandbox: continuing, as we cannot run' in ''.join(output))
def make_fit(its):
"""Make a new FIT from the .its source file.
@@ -117,22 +121,22 @@
# Build the FIT, but don't sign anything yet
cons.log.action('%s: Test FIT with signed images' % sha_algo)
make_fit('sign-images-%s.its' % sha_algo)
- run_bootm(sha_algo, 'unsigned images', 'dev-')
+ run_bootm(sha_algo, 'unsigned images', 'dev-', True)
# Sign images with our dev keys
sign_fit(sha_algo)
- run_bootm(sha_algo, 'signed images', 'dev+')
+ run_bootm(sha_algo, 'signed images', 'dev+', True)
# Create a fresh .dtb without the public keys
dtc('sandbox-u-boot.dts')
cons.log.action('%s: Test FIT with signed configuration' % sha_algo)
make_fit('sign-configs-%s.its' % sha_algo)
- run_bootm(sha_algo, 'unsigned config', '%s+ OK' % sha_algo)
+ run_bootm(sha_algo, 'unsigned config', '%s+ OK' % sha_algo, True)
# Sign images with our dev keys
sign_fit(sha_algo)
- run_bootm(sha_algo, 'signed config', 'dev+')
+ run_bootm(sha_algo, 'signed config', 'dev+', True)
cons.log.action('%s: Check signed config on the host' % sha_algo)
@@ -149,7 +153,7 @@
util.run_and_log(cons, 'fdtput -t bx %s %s value %s' %
(fit, sig_node, sig))
- run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash')
+ run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', False)
cons.log.action('%s: Check bad config on the host' % sha_algo)
util.run_and_log_expect_exception(cons, [fit_check_sign, '-f', fit,