mpc512x: Use in/out accessors for all registers

This is not only a cosmetic change as it fixes the real bug of board
reset not working with the ELDK 4.2 toolchain.

Signed-off-by: Detlev Zundel <dzu@denx.de>
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index dac48db..f96a4c8 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -1,6 +1,6 @@
 /*
+ * (C) Copyright 2007-2010 DENX Software Engineering
  * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2007 DENX Software Engineering
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,6 +32,7 @@
 #include <net.h>
 #include <netdev.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_OF_LIBFDT)
 #include <fdt_support.h>
@@ -44,7 +45,7 @@
 	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	ulong clock = gd->cpu_clk;
 	u32 pvr = get_pvr ();
-	u32 spridr = immr->sysconf.spridr;
+	u32 spridr = in_be32(&immr->sysconf.spridr);
 	char buf1[32], buf2[32];
 
 	puts ("CPU:   ");
@@ -87,17 +88,17 @@
 	/*
 	 * Enable Reset Control Reg - "RSTE" is the magic word that let us go
 	 */
-	immap->reset.rpr = 0x52535445;
+	out_be32(&immap->reset.rpr, 0x52535445);
 
 	/* Verify Reset Control Reg is enabled */
-	while (!((immap->reset.rcer) & RCER_CRE))
+	while (!(in_be32(&immap->reset.rcer) & RCER_CRE))
 		;
 
 	printf ("Resetting the board.\n");
 	udelay(200);
 
 	/* Perform reset */
-	immap->reset.rcr = RCR_SWHR;
+	out_be32(&immap->reset.rcr, RCR_SWHR);
 
 	/* Unreached... */
 	return 1;
@@ -124,8 +125,8 @@
 
 	/* Reset watchdog */
 	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	immr->wdt.swsrr = 0x556c;
-	immr->wdt.swsrr = 0xaa39;
+	out_be32(&immr->wdt.swsrr, 0x556c);
+	out_be32(&immr->wdt.swsrr, 0xaa39);
 
 	if (re_enable)
 		enable_interrupts ();
diff --git a/cpu/mpc512x/diu.c b/cpu/mpc512x/diu.c
index 691451a..a24f395 100644
--- a/cpu/mpc512x/diu.c
+++ b/cpu/mpc512x/diu.c
@@ -57,10 +57,10 @@
 	debug("DIU pixval = %lu\n", pixval);
 
 	/* Modify PXCLK in GUTS CLKDVDR */
-	debug("DIU: Current value of CLKDVDR = 0x%08x\n", *clkdvdr);
-	temp = *clkdvdr & 0xFFFFFF00;
-	*clkdvdr = temp | (pixval & 0xFF);
-	debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *clkdvdr);
+	debug("DIU: Current value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
+	temp = in_be32(clkdvdr) & 0xFFFFFF00;
+	out_be32(clkdvdr, temp | (pixval & 0xFF));
+	debug("DIU: Modified value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
 }
 
 char *valid_bmp(char *addr)
diff --git a/cpu/mpc512x/pci.c b/cpu/mpc512x/pci.c
index bbfab3e..141db8b 100644
--- a/cpu/mpc512x/pci.c
+++ b/cpu/mpc512x/pci.c
@@ -1,6 +1,6 @@
 /*
+ * Copyright (C) 2009-2010 DENX Software Engineering <wd@denx.de>
  * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007.
- * Copyright (C) 2009 DENX Software Engineering <wd@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -60,10 +60,10 @@
 	struct pci_controller *hose;
 
 	/* Set PCI divider for 33MHz */
-	reg32 = im->clk.scfr[0];
+	reg32 = in_be32(&im->clk.scfr[0]);
 	reg32 &= ~(SCFR1_PCI_DIV_MASK);
 	reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
-	im->clk.scfr[0] = reg32;
+	out_be32(&im->clk.scfr[0], reg32);
 
 	clrsetbits_be32(&im->clk.scfr[0],
 			SCFR1_PCI_DIV_MASK,
diff --git a/cpu/mpc512x/serial.c b/cpu/mpc512x/serial.c
index 4fc4693..ec2f41b 100644
--- a/cpu/mpc512x/serial.c
+++ b/cpu/mpc512x/serial.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000 - 2009
+ * (C) Copyright 2000 - 2010
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -125,7 +125,7 @@
 	while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
 		;
 
-	psc->tfdata_8 = c;
+	out_8(&psc->tfdata_8, c);
 }
 
 void serial_putc_raw (const char c)
@@ -137,7 +137,7 @@
 	while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
 		;
 
-	psc->tfdata_8 = c;
+	out_8(&psc->tfdata_8, c);
 }
 
 
@@ -157,7 +157,7 @@
 	while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY)
 		;
 
-	return psc->rfdata_8;
+	return in_8(&psc->rfdata_8);
 }
 
 int serial_tstc (void)